PLS SLD Bedienungsanleitung
PLS SLD
Laser Detector
PACIFIC LASER
SYSTEMS
The Professional Standard
For use with your
PLS pulsed laser alignment tool.
319
$XJXVW
GENERAL DESCRIPTION
IMPORTANT: YOUR PLS SLD DETECTOR IS DESIGNED
FOR USE WITH YOUR PLS PULSED LASER. THE PLS
SLD IS UNIQUE TO PLS LASER TOOLS. IT CANNOT BE
USED WITH A ROTARY LASER.
Please read the operating manual for your PLS pulsed tool.
They must be in the “exterior” mode to transmit to your PLS
SLD laser detector.
Liquid Crystal display (LCD’s) on the front and rear are
included for easy visual indications of grade information and
detector settings. A beeper also emits an adjustable audible
tone that indicates on-grade, high or low. Accuracy levels
are user selectable to meet various job requirements.
The detector has been specifically designed for use in con-
struction environments. Impact resistant housings, recessed
windows, water resistant design, durable battery contacts,
and an audible beeper are incorporated into every detector.
A general purpose clamp is included and designed to
capture horizontal or vertical reference using various
grade rods and staffs.
NOTE: For maximum detector range, make sure the laser
transmitter has fresh batteries.
Extreme temperatures may affect the maximum detection
range.
PLS SLD DETECTOR
34
5
6
2
1
7
1.Power Switch - press once to turn ON. Unit beeps and LCD’s turn
on to confirm power is on. Press again to turn off. Unit automatically
turns off after five minutes of non-use.
2.Accuracy Switch - select detection accuracy. Pressing switch cycles
through accuracy options.
3.Beeper Switch - pressing switch cycles OFF, and ON.
4.Liquid Crystal Display (LCD) - LCD indicates the detectors position
relative to the laser beams and other detector settings.
5.On-Grade Mark - aligned with the laser on-grade reading and
vertical marking notch. Mark located close to the photocells for error
free marking.
6.Laser Reception Window - photocells are located behind the window
which detect the laser signal. Window must be directed toward laser.
7.Beeper Output - 3 distinct audible signals.
• Fast signal: Detector too Low.
• Solid signal: On-Grade
• Slow signal: Detector too High
Operation - Front View
PLS SLD DETECTOR
Operation - Back View
8.Captive Screw Thread - detector thread insert accepts the rod
clamp screw to secure detector to the clamp.
9.Offset Notch - used for transferring reference marks, 2” 3/32 from
top of detector.
10A & 10B.Clamp Guide - 2 dimples help align rod clamp.
10A- Vertical line reference. 10B- Horizontal line reference.
11.Battery Door Latch - depress latch to open and install or replace
batteries. Insert batteries noting plus (+) and minus (-) terminal dia-
gram on the detector housing. Compartment houses (1) 9 Volt battery.
Care- Do not submerge PLS SLD in water.
12.Rear LCD - functions the same as the front LCD.
12
8
10 A
9
8
11
10 B
LIQUID CRYSTAL DISPLAY
1.Beeper Volume Indicator - All symbols are on when loud.
No symbols indicates beeper is off.
2. Low Battery Warning
3. Detection Accuracy Indicator:
3
2
Beeper On Beeper Off
3
1
Full-
Batteries OK
Half-
Initial Warning
Empty
Fine
.75mm medium
1.75mm
ROD CLAMP
1.Captive Rod Clamp Screw- attaches to the back
of detector.
2.Alignment Point - secures and aligns rod clamp to
detector in either horizontal or vertical position.
3.Reference Indicator - points are aligned with the detector
on-grade for grade rod readings.
4.Clamp Screw Knob - secures clamp to rods and staffs
by moving the traveling jaw.
1
2
4
3
SPECIFICATIONS
Working Distance: From 100 feet
to 250 feet
Detection Height: 2.0 (50mm)
Accuracy: Fine: .75mm
Medium: 1.75mm
Power Supply: 1 x 9 Volt battery
Battery Life: 30 hours
Weight 4.8 oz. without clamp
8.0 oz. with clamp
Dimensions: 3.25” x 3.25” x 1.25”
(163 x 74 x 30 mm) without clamp
OperatingTemp:-4oFto+140oF(-20
RC+60oC)
Storage Temp: -40oFto+158oF(-40
R&70oC)
EC Declaration of Conformity
PLS hereby declares that the equipment
specified above conforms to EC Directive(s).
MAINTENANCE AND SAFETY
Detector Cleaning: Donotwipeordustdirtoffthedetector
reception window or display windows with a dry or other
abrasive material as scratching could occur, reducing visibili-
ty through these windows. A soft cloth and mild soap and
water are effective. The unit may NOT be submerged under
water or sprayed with a low pressure hose. PLS SLD is not
water proof and warranty does not cover water damage. Do
not use any other fluids other than water as they may attack
polymer components.
Transportation: Use the original carton or your PLS laser
instrument case to transport the detector.
Storage: If the detector will not be used for a month or
more, it is recommended to remove the battery.
Batteries: It is recommended to use only high quality alka-
line batteries.
Intended Uses of Detector: The PLS SLD laser detector is
designed and suitable only for detecting a laser beam from
PLS pulsed lasers.
Prohibited Uses:
- Operation without instructions.
- Operation other than the intended uses.
- Opening the detector, except the battery compartment.
- Modification or conversion of the detector.
Precautions:
- The person in charge of the detector must understand the
instructions in this manual and ensure other users do also.
- Periodically carry out test measurements, particularly after
the detector has been subjected to abnormal use and before
and after important measurements.
WARRANTY
PLS Pacific Laser Systems PLS SLD laser detector and
clamp are warranted to be free of defects in material and
workmanship for a period of one year. This warranty period
is twelve months from the date the products is delivered
from the dealer to the purchaser or is put into service by a
dealer as a demonstration unit or rental unit. In addition to
the basic warranty above, PLS Pacific Laser Systems may
choose to repair or replace, at its discretion, any PLS SLD
detector, in the event of failure for any reason, during the
warranty period.
Any evidence of misuse, alteration, or an attempt to repair
products by unauthorized personnel, or use of parts other
than those provided by PLS Pacific Laser Systems automati-
cally voids the warranty. Competitor purchased and tested
units are excluded from this warranty.
The user of the product is expected to follow all operating,
maintenance and care instructions.
PLS Pacific Laser Systems’ liability under this warranty is
limited to repairing or replacing any product returned to its
factory for that purpose. The foregoing states the entire lia-
bility of PLS Pacific Laser Systems regarding the purchase
for any consequential loss or damage of any kind.
This Warranty is in lieu of all other warranties, expressed or
implied, and constitutes all of PLS Pacific Laser Systems’
liability with respect to merchandise sold by it.
PACIFICLASER
SYSTEMSLLC
TheProfessionalStandard
1
32%R[(YHUHWW:$
86$
WWW.PLSLASER.COM
PLS SLD Laser Detector
Andere Handbücher für SLD
1
Inhaltsverzeichnis
Andere PLS Sicherheitssensor Handbücher
