Plum MacR6 Bedienungsanleitung

PLUM Sp. z o.o. Ignatki, ul. Wspólna 19, 16-001 Kleosin tel. +48 857497000 fax +48 857497014

www.plummac.com [email protected]

INSTALLATION MANUAL

Name: Pressure recorder

Type: MacR6

Variant: Z0 & Z0-P

Communication protocol: GAZMODEM2

1. PREPARING THE DEVICE

•Remove six TORX T10 screws from back of the

cover.

•Next place the Micro SIM card into the holder as

shown in the picture. There is no need to remove

the battery to insert the SIM card.

•In the next step put the device together and

tighten the screws with 0,65-0,75Nm

momentum.

SIM card and antenna assembly is allowed only out of the hazardous explosive

zone.

•Delivered devices may have the display turned off. To wake it up close the magnet (i.e. OptoBTEx

head to the OPTICAL INTERFACE window. SLEEP 3 sign will appear. Repeat closing magnet until

START sign will appear. Procedure presented in the tutorial movie => red QR code.

RELATED TO FIRMWARE:

PROGRAM SERIE: MacR6-P S001.04

Document version: 1.1

January-2019

Pressure recorder MacR6-P

Installation manual v1.0 –December 2017

•Turn on the OptoBTEx interface, put it on the OPTICAL INTERFACE window.

Turn on the DATA LOGGER CONFIGURATOR app on Android mobile device.

Link to download the freeware application => green QR code.

2. WALL OR PIPE ASSEMBLY

MacR6-Z0 data logger is the device designed for installation in hazardous explosive zones 0, 1,

2. Ex marking II 1G Ex ia IIA T4 Ga.

Connecting external antenna cable is allowed only out of the explosive zone.

Minimum requirements for improving the safety and health protection of workers potentially at

risk from explosive atmospheres are prescribed in Directive 1999/92/EC of the European

Parliament and of the Council of 16 December 1999 (ATEX 137 'Worker Protection Directive').

Installation environment must guarantee the strong GSM network signal of the vendor whose

SIM card is used in MacR6.

Data logger placement is utilized by using dedicated mounting kit.

•attach the holder to the wall using mounting pegs, or horizontally and vertically to the gas pipes

using cable ties

•place the recorder inside the holder until it clicks

Protection level will be kept only with proper cables diameters usage, tightening cable glands,

sealing ring arrangement and tightening the front cover with 0,65Nm momentum (maximum

0,75Nm).

In case of flooding the opened device immediately take off the battery. That device has to be

examined by the manufacturer.

Pressure recorder MacR6-P

Installation manual v1.0 –December 2017

3. SENSORS CONNECTION

Connect the pressure sensor to the gas flow installation. (MacR6-Z0-P & MacR6-Z0-P/2P):

It is required to connect the sensor using the shut-off valve.

Pressure sensor in MacR6-Z0-P device

Before assembly pressure sensor it is required to reset its indications (compensation of atmospheric

pressure). It can be done via Android application (by option in menu Options/Pressure Zero/Make fixes

and Save data) or via PlumCONF application (set „P offset st.” parameter to value: 1 =>for 1-pressure

sensor version of device). “P CAL” will be shown on LCD.

After pressure sensor assembly it is recommended to perform SEr 8 menu to begin pressure

measurement test (measurement every 5 seconds for one minute). Value of pressure will be shown on

LCD.

4. CONNECTION WITH SMARTPHONE

•OptoBTEx Bluetooth pairing code: 1234. Blue QR code contains the movie presenting proper

connection between smartphone and MacR6 device.

LED diode must be on the right side looking on the front of the MacR6. During

transmission its musts flash constantly.

Configuration using computer is more detailed in „Configuration using PC”

section.

5. COMMUNICATION WITH THE DEVICE

•Through correct device readout on the main screen will be presented the device nameplate. It

consists of devices name, variant, serial number, firmware version. After loading all the parame-

ters, the application will proceed to main configuration window.

Pressure recorder MacR6-P

Installation manual v1.0 –December 2017

6. CONFIGURATION PARAMETERS

•Main application window presents parameters necessary for proper device operation.

Additional parameters:

oPIN code to SIM card

oDevice password (by default: 4096)

oLocalization parameters

NOTE: Application is designed for whole MacR6 product family. Types of presented pa-

rameters can be different for each product type.

•Choosing "MORE PARAMETERS" presents options common for bigger amount of measuring sites.

Values able to adjust:

odiagnostic phone number (i.e. installers cell phone number which will get the SMS

message with installation summary). Way of typing: XXYYYYYYYYYYY where XX -

country destination number without +, YYYYYYYYYYY - phone number

odata server address - way of typing: address:port, i.e. www.ewebtel.com:80

otime synchronization option (winter/summer/auto change)

•Choosing "OPTIONS" presents additional parameters:

oInfo - device nameplate, information about last measured GSM range signal value -

CSQ, device clock

oClock programming - synchronizing devices clock with the smartphone including time

synchronization options (winter/summer/auto change)

oPressure limits - MacR6-P allows for setting four pressure limits - low limit warning and

exceedance, high limit warning and exceedance. After exceeding the warning level user

will get the information about exceedance risk.

oService APN - APN used for communication with FTP server.

NOTE: It is essential to ensure if the recorder clock is set correctly. If not, it is required

to set it using menu OPTIONS and Clock programming.

Pressure recorder MacR6-P

Installation manual v1.0 –December 2017

7. CONFIGURATION SAVING

•After setting all desired parameters use the "SAVE

DATA" button on the bottom of the window. Wait for

the confirmation notification on screen.

•Blue markers near modified parameters will change

to green.

•Setting the configuration will cause automatic instal-

lation mode SEr 5 start. If not, SEr 5 must be per-

formed manually.

•Diagnostic phone number used for summary SMS

message can be programmed only while SEr 5 is

displayed on the device.

8. CONFIGURATION USING PC

MacR6-P can be configured using PlumCONF freeware PC software. Software is available to download

using purple QR code.

Key parameters:

Parameter

name

Description

Update

Schedule Type

FTP connection schedule: 1 –once a day; 2 –once a week; 3 –once a month

Schedule Type

Data sending schedule: 1 –once a day; 2 –once a week; 3 –once a month

Report Hour

Hour of sending report to the server

Report Day

Day of sending report to the server –parameter ignored if Schedule Type = 1

Registration

Report Hours

Decimal value of additional report hours binary vector –extended info in user

manual

Report Delay

Delay of sending report according to Report Hour. 0 - no delay, 1 - delay from 0-10

minutes, 2 - delay from 10-20 minutes, 30 - delay from 20-30 minutes

Registration

period

Registration period; possible to set total dividers of 60

PIN to SIM card

APN

APN used for data sending

Update APN

APN used for FTP connection

Data Server

Address

Data server address, i.e. www.ewebtel.com:80

Time Auto

Change

0 - auto time change winter/summer; 1 - only winter time; 2 - only summer time

P Min Alarm

Lower pressure limit, exceeding will cause the alarm

P Max Alarm

Upper pressure limit, exceeding will cause the alarm

P Min Warning

Lower pressure limit warning about possible pressure drop

P Min Warning > P Min Alarm

P Max Warning

Upper pressure limit warning about possible pressure increase

P Max Warning < P Max Alarm

P offset st.

Clearing pressure sensors indication; necessary to be done before the installation

•set to: 1 => for 1-pressure sensor version of device

Pressure recorder MacR6-P

Installation manual v1.0 –December 2017

9. INSTLLATION MODE

•Manual SEr 5 option turning on can be done using strong magnet or OptoBTEx head by closing it

to the OPTICAL INTERFACE window. Repeat that step until SEr 5 sign will appear. Installation

process will start when all indicators disappear.

•Installation process startup is marked by blinking antenna symbol

on display. This means that the internal modem is turned on.

•After few seconds the GSM range indicator will flash constantly.

Number of bars determines the GSM range.

•Antenna symbol will be blinking for about minute, then it will flash constantly. Blinking

icon will appear, which means connecting with APN.

•In the next step together with icon the blinking data sending icon will appear.

•In the end, the device will proceed to normal work showing periodically date, hour and registered

parameters value. All of mentioned icons should flash constantly, which determines the correct-

ness of sending data.

10. DEVICE DISPLAY

On display there are presented periodically registered values, date and hour.

During normal device state following indicators can be visible:

•"SEr 7" menu allows for connection with server examination. During this

mode registered data from last billing day is sent. On display the "rEPort"

sign will appear. When finished - the symbol will appear.

•"SEr 6" menu allows for GSM signal range and antenna efficiency exam-

ination. This test lasts for about 1 minute, where on display current CSQ

level is presented. Mostly CSQ ≥ 9 is sufficient.

Battery level indicator

Sending data to the server / data sent.

APN connection indicator –visible together with indicator above

Pressure recorder MacR6-P

Installation manual v1.0 –December 2017

Variants

Analog inputs

Digital inputs

Digital outputs

Modem type

AI1

AI2

GSM

P-X

Description:

0 –not installed

P –pressure sensor

X measurement range, i.e.;

0.1G –0÷10 kPa

6G –0÷600kPa

6A - 80÷600kPa abs

DI/DO –0, 1 lub 2 –digital inputs or outputs amount

2G –modem 2G

3G –modem 3G

Sample marking:

TECHNICAL SUPPORT

•Technical Department

Phone: +48 85 749 70 08

serwis@plum.pl

PLUM Sp. z o.o.

Ignatki, ul. Wspólna 19 , 16-001 Kleosin

www.plummac.com

AI1

AI2

GSM

P-6G

Inhaltsverzeichnis

Andere Plum Diktiergerät Handbücher

Plum

Plum MacR6-Z0 Bedienungsanleitung

Beliebte Diktiergerät Handbücher anderer Marken

Sony

Sony ICD-UX533F Bedienungsanleitung

RCA

RCA VR5230 Bedienungsanleitung

Ramsey Electronics

Ramsey Electronics BULLSHOOTER ENDLESS LOOP BS2C Benutzerhandbuch

Sony

Sony TCM-400DV Bedienungsanleitung

LogTag

LogTag TREL30-16 Bedienungsanleitung

SVAT

SVAT CVP800 Bedienungsanleitung

Marantz

Marantz PMD620 Bedienungsanleitung

Zoom

Zoom H4next Bedienungsanleitung

Roland

Roland BR-900CD Bedienungsanleitung

JVC

JVC ProHD GY-HMZ1U Bedienungs- und Wartungshandbuch

Panasonic

Panasonic PQT8531-P Bedienungsanleitung

Sanyo

Sanyo TRC-6400 Bedienungsanleitung

Tascam

Tascam DR-07 Bedienungsanleitung

Olympus

Olympus DW-90 Bedienungsanleitung

Sanyo

Sanyo ICR-B150 Bedienungsanleitung

Korg

Korg D4 Bedienungsanleitung

Sony

Sony ICD-SX46 - Ic Recorder Bedienungsanleitung

Olympus

Olympus DIGITAL VOICE RECORDER WS-200S Montageanleitung