Plus BF-030 S Operation Bedienungsanleitung

PLUS

BF-030S

OPERATION MANUAL

First of all, we would like to thank you very much

for purchasing a Plus Board Fax CONFERENCE

MODEL.

Please read this Operation Manual before using

the machine to get the best performance out of

the product.

We recommend that you keep this manual for

future reference.

FEATURES ......................................................... 1

PRODUCT FEATURES ...................................... 2

CONTROL FUNCTIONS..................................... 3

HOW TO USE ..................................................... 4

MAINTENANCE/HOW TO STORE..................... 7

HANDLING PRECAUTIONS............................... 7

CHECK LIST OF SIMPLE FAILURES ................ 8

SPECIFICATIONS .............................................. 9

CONTENTS

EXPLANATION OF UL REGULATORY LABEL

(USA ONLY)

PLEASE NOTE: The description "Computer Rooms" on the

label located on the rear of the copyboard, refers to areas where

an abundance of computer control equipment (such as high output

servers) is being used, It does NOT refer to environments such

as offices or classrooms where there are simply PC's being used.

UL regulations require that we place a warning label in regard to

this item being used in a "Computer Room". Please understand

that this equipment will in no way interfere with the running of

computer equipment or peripherals. The UL regulation simply

applies to all items that contain flammable material in excess of a

specified area, We would like to further stress that there is no

inherent risk of this equipment causing a fire. It is only pointing

out that should a fire occur, then this equipment will also burn

along with any other flammable materials contained in the room.

Should you have any questions whatsoever about this information,

please call PLUS Corporation of America directly at (201)818-

2700

BF-030S BOARD FAX CARTON CONTENTS

Please be sure all of the following items are included in

the carton with the BF-030S BOARD FAX

Board Fax main unit........... 1

ACCESSORIES

Set of Dry-eraseble markers (one each black, red

and blue).

Dry-Eraser (1)

Fax Paper (30m(96ft) , 12mm(w/1/2") core)

Operation Manual with warranty card

OPTIONAL ACCESSORIES

PC interface board - to enable integration of the

BF-030S and your Personal Computer

The board size is W1200mm H920mm-large enough to show

all the ideas that you discuss during your meetings, without any

omissions.

Information on the large screen can be copied immediately onto

a sheet of A4/Letter paper.

Those who attend a meeting can concentrate on the subject,

as there is no need to waste time jotting down notes.

The board screen can be slid easily, and it is a simple user-

friendly unit with a power cord storage hook that comes in handy

when moving the unit, a powder tray enabling easy disposal of

powder, etc.

The BF-030S can be easily upgraded for use with your PC

(with optional PC interface board)

FEATURES

REAR

FRONT

Tray

PRODUCT FEATURES

Printer

Caster

T-shaped stand

Expansion slot

(for optional upgrades)

Optional accessory sold separately:

PC interface board - to enable down-

loading of board information from the

BF-030S to the PC

()

Board screen 50mm 50mm

gridded surface area

Operation panel

Printer cover

T-shaped stand

Opening button ............................. Press this button to open the printer hatch when replacing

the thermal paper.

Power switch ................................. Press "I" to turn ON the power when starting machine

operation.

Power lamp .................................... Press the switch, and the green lamp will blink on and off.

The lamp will stay lit (green) when the read sensor inside

the machine is ready for operation.

Paper warning lamp ....................... When the thermal paper has run out, the red lamp will

light. Load new recording paper.

One-surface copy key.................... This is used when one page of the screen is copied onto

A4 paper. The machine produces a copy at a reduced

scale of the same length and breadth.

Two-surface reduction copy key ..This is used when copying two pages of the screen at a

reduced size onto A4 paper. At this time, the copy is

reduced horizontally.

Repeat key ...................................... For use with optional PC interface kit.

PC COPY key ..................................For use with optional PC interface kit.

Feed/stop key ................................. This is used when the screen slides to the left.

Pressing this key advances the screen by one page and

then automatically stops.

Pressing the key while the board screen is being moved

stops it immediately. This can also be used when paper

has run out and must be refilled.

If this key is pressed during the copying operation, the

copying performance ends and the printer stops.

OPERATION PANEL

CONTROL FUNCTIONS

BEFORE USE...

HOW TO USE

WHEN COPYING...

Cut-off Recording Paper

When copying is completed, pull the tip of the recording

paper upwards and cut it off with the edge of the outlet.

When copying reduced two-surfaces:

Press two-surface reduction copy key. At this time the board

screen slides forward two pages, and the written contents are

reduced to A4 size and copied.

When copying one surface:

Press the one-surface copy key. At this time the board screen

slides forward one page and the written contents are copied

onto A4 paper.

POWER

POWER ON

PAPER OUT

Press the caster lock switches ON and keep

the casters in a locked position.

Plug in and turn ON the power switch. After

the power lamp blinks for 2-3 seconds, it

should turn green.

Press the feed/stop key to half the copying operation

immediately. The printer stops after completion of copying

up to that point.

HOW TO USE

WHEN SLIDING THE SCREEN FORWARD...

Manual sliding

It is also possible to slide the board screen manually. In

this case, it can be slid in either direction; to the right and

left. However, manual sliding at an excessively high speed

must be avoided as it occasionally causes problems.

Sliding by using key

Press the feed/stop key. Then, the board screen slides to

the left by one page and stops. It stops immediately when

the feed/stop key is pressed during the sliding operation.

Press the opening button to open

the printer cover.

Take out the core left over from the thermal paper.

WHEN REPLACING RECORDING PAPER...

*Concerning replacement of recording

paper

Replace with new recording paper in the following cases:

When a red line appears at the end of the recording paper.(A

red line appears when only about one meter or so of

recording paper is remaining.)

When the paper warning lamp lights red.

As illustrated, set it in so that the

tip of the new roll of recording

paper extends about 20cm from

the outlet.

When a red line appears at the edges of the recording paper. The red line will

appear when there is only about one meter (3 feet) or so of recording paper left on

the roll.

When the paper out lamp lights red.

HOW TO USE

Note:

Please use only the correct type of recording paper.

Particular attention must be given to the winding direction of the recording paper, since

copying cannot be performed if the winding direction of the recording paper is reversed.

Be sure to keep the recording paper straight when loading, failure to do so may cause

wrinkling or tearing of the paper during the copy function.

Push both ends of the hatch

closed until it locks with a clicking

noise. At this time, make sure that

the recording paper has not

slipped.

Replace the recording paper in the following situations

Cut off extra recording paper from

the printer outlet.

*Automatic Power Cut-off Function

If there is no key operation for about an hour, a fluorescent lamp inside the main unit automatically

goes off and the machine enters a state of power conservation. (At this time, the power lamp is lit.)

If at any time any key is pressed, the fluorescent lamp light again, and the normal operating

condition is restored.

1. Avoid placing the machine in hot spots where it is exposed to direct sunlight or

where an air conditioning duct.

2. When using sticky tape on the surface of the board screen, do not leave it on for a

long time. Moreover, after removing it, wipe the screen clean. Do not hit or pierce

the board screen with any hard or sharp objects.

3. Do not leave writing or marks on the board screen for a long time since it sometimes

become difficult to erase.

4. Be careful not to stain the joints of the board screen as there have been very rare

cases where such stains have been copied.

5. As thinner, benzine, alcohol, etc., may discolor or mark the main unit and the

board screen, never use such chemicals when cleaning.

6. Use only the correct type of recording paper.

When storing thermal recording paper, avoid the following places. This is important

because storage in such places may cause color development or discoloration.

(1) Places where the paper is exposed to direct sunlight.

(2) Places where the paper is exposed to temperatures of more than 35˚C and

humidity of 85% or over.

(3) Places adjacent to alcohol, thinner, benzine, ammonia, etc.

MAINTENANCE/HOW TO STORE

HANDLING PRECAUTIONS

Carry out the following maintenance procedures periodically to ensure high quality

copying performance at all times.

(1) Cleaning of the surface

When the surface gets stained, wipe it off with a slightly damp cloth. Also, if the stain

is particularly stubborn, use a solution of water-thinned neutral detergent to wipe it

off. Do not start using the machine until the sheet has completely dried.

(2) Cleaning of tray and decorative frame

Wipe away any dirt or residue left by the markers in the tray and the decorative

frame with a slightly damp cloth.

CHECK LIST OF SIMPLE FAILURES

HANDLING PRECAUTIONS

7. When replacing recording paper, do not place any objects on the open printer

cover or do not put your elbows on it.

8. After use, make sure to turn OFF the power switch. In addition, when it is not to be

used for a long time, make certain that the plug of the power cord is pulled out form

the outlet.

9. Always use the correct type of marker. Be careful not to use other markers as the

sheet may be damaged or, in some cases, the ink may be difficult to remove.

10. Write within an area of a size that can be easily read.

CONDITIONS CHECKPOINTS

If no satisfactory result can be achieved even after the above, contact the suppliers or our

company.

11. When moving this machine, turn OFF the caster lock switches, hold both the right

and the left sides of the main unit firmly, and avoid any sudden jolts or shocks.

When the power fails

When pressing copy key does not result

in copying

Although printer is functioning, nothing is

copied on recording paper

When characters written on board screen

cannot be rubbed out even by the use of

an eraser

When copy is dirty

Check if power cord is pulled out of outlet.

Check if paper warning lamp (red) is lit.

Check if winding direction of recording

paper is set on reverse. (No copying is

made on back of recording paper)

Check if any marker except the correct type

has been used. Wipe off with a damp cloth

or neutral detergent.

Check for ink residue on the screen. If it is

stained, wipe off carefully with a soft damp

cloth.

30mm 30mm

20mm

Andere Handbücher für BF-030 S Operation

Inhaltsverzeichnis

Andere Plus Projektor Handbücher

Plus

Plus DLPTM Technology Projector Bedienungsanleitung

Plus

Plus U4-232 Bedienungsanleitung

Plus

Plus U2-1130 Bedienungsanleitung

Plus

Plus U4-112 Bedienungsanleitung

Plus

Plus V-1080 Bedienungsanleitung

Plus

Plus U3 Bedienungsanleitung

Plus

Plus V-1080 Bedienungsanleitung

Plus

Plus U5-732 Bedienungsanleitung

Plus

Plus U4-237 Bedienungsanleitung

Plus

Plus V-339 Bedienungsanleitung

Plus

Plus V-332 Bedienungsanleitung

Plus

Plus UP-800 Bedienungsanleitung

Plus

Plus U3-1080 Bedienungsanleitung

Plus

Plus U4-232 Bedienungsanleitung

Plus

Plus up-880 Bedienungsanleitung

Plus

Plus PLUS U7-132HSF Bedienungsanleitung

Plus

Plus U7-132 Bedienungsanleitung

Plus

Plus U5-512h Bedienungsanleitung

Plus

Plus U7-137 Bedienungsanleitung

Plus

Plus U2-X2000 Bedienungsanleitung

Plus

Plus U2-1200 Bedienungsanleitung

Plus

Plus U2-1130/U2-1110 Bedienungsanleitung

Plus

Plus U5-111 Bedienungsanleitung

Plus

Plus BF-030 W Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung