PMI SMC ADVANCE TECH Bedienungsanleitung
SOLUTIONS & KITS KITS
PMIROPE.COM 1-800-282-ROPE
T
For more information about this or other
PMI products, please contact us at:
PIGEON MOUNTAIN INDUSTRIES
PO Box 803
LaFayette, GA 30728, USA
706-764-1437
1-800-282-ROPE (7673)
PMIROPE.COM
PMI LIMITED WARRANTY
PMI products are warranted to the original retail purchaser to be free
from defect in material and workmanship for a period of one year. PMI
will repair or replace the item without charge provided inspection at our
factory discloses no misuse or alteration, which, in our judgment, has
affected the condition or functioning of the product. All implied warranties
imposed by law in connection with the sale of PMI products are also limited
in duration to a period of one year. PMI expressly excludes and shall not
be liable for any consequential damages arising out of any breach of the
express or implied warranties on sales of PMI products. Because of the
high risks involved in high angle rope work such as, but not limited to,
rescue, rope access, caving, rappelling, rock climbing and mountaineering,
no further warranties exist or are implied by PMI. Regulations issued under
the Magnuson-Moss Warranty Act require us to include the following
statement: some states do not allow limitations on how long an implied
warranty lasts nor the excluding or limitation of incidental or consequential
damages, so the above limitations may not apply to you.
• YOU COULD BE KILLED OR SERIOUSLY INJURED IF YOU
DO NOT READ AND UNDERSTAND THIS BOOKLET BEFORE
USING PRODUCT.
• SPECIAL TRAINING AND KNOWLEDGE ARE REQUIRED TO
USE THIS PRODUCT.
• YOU MUST THOROUGHLY READ AND UNDERSTAND ALL
MANUFACTURERS’ INSTRUCTIONS BEFORE USE.
• USE AND INSPECT THIS PRODUCT ONLY IN ACCORDANCE
WITH THE MANUFACTURERS’ INSTRUCTIONS.
• YOU CAN CONTACT PMI AT 706-764-1437 FOR
IMPORTANT SAFETY INFORMATION.
PMI®/ SMC
ADVANCE TECH
HAUL SYSTEM
WARNING
KT36158
ABOUT YOUR PERSONAL SAFETY
Your personal safety is just that...... personal. You are responsible for
your own safety. We build the best possible products for the purposes
stated, but it is up to you to be responsible for applying these, and
other products, safely.
Your personal safety is inuenced by the decisions you make. Take
the time to read and understand these instructions, and get the
instruction you need for your application. The high angle environment
is a potentially dangerous one. We hope you take it as seriously as we
do. The included pull cord for releasing the capture cam on the pulley is
NOT a life safety rope and should never be used to support a life safety
load.
Proper training, good equipment and a personal commitment to safety
will lessen the danger of rope work. However, take care not to become
complacent. Inspect your equipment, rigging, anchors and that of
others around you for safety at all times when you are in the vertical
environment.
Activities involving the use of the life safety rope are inherently
dangerous. Such activities include, but are not limited to, ascending
and descending xed lines, hauling, highlines, positioning, and belaying.
Special knowledge and training are required to use this product.
Read this brochure entirely. If a copy was not provided with your rope,
or you have lost yours, contact PMI for a free copy.
You are responsible for your own actions and decisions; if you do not
accept this responsibility, do not use this product.
You must thoroughly read and understand all manufacturers
instructions before use.
Use and inspect this rope only in accordance with the manufacturers
instructions provided here.
Save these instructions.
Your new haul system has been assembled from the nest components
to give you years of dependable service. The compact form factor
provides an extremely strong and versatile haul system for about three
pounds. This pre-rigged system gives either a 5:1 or 4:1 mechanical
advantage with no rigging required. Just ip the system end to end to
set up for either mechanical advantage as needed. A big advantage of
this haul system is the incorporation of the SMC Advance Tech line of
pulleys which provide a built-in progress capture system
that can be reset with an included lanyard. The capture cam can also
be parked to allow the system to run freely. Your new system also
comes with PMI 9mm static rope and SMC locking steel carabiners.
SKU:
KT36158
USA Made | Berry Compliant
THIS SYSTEM INCLUDES:
A. (1) SMC Advance Tech HX progress capture pulley
B. (1) SMC Advance Tech Mate pulley
C. (2) SMC Lite Steel locking carabiners
D. (10) meters of PMI® 9 mm EZ-bend rope
E. (3) meters of 3 mm PMI utility cord
F. (1) 5 mm Maillon Rapide oval screw link
G. (1) compact storage bag (red)
WARNINGSINTRODUCTION
CERTIFICATIONS
CONTENTS
A
B
C
C
D
E
G
F
WARNING
WARNING
WARNING
V1-0413
Item
Model #
Date of Manufacture for
Each Component
Date in Service
Lot/Serial Number
Purchased From
Purchase Date
ID Markings
SMC Advance Tech HX Pulley
SMC Advance Tech Mate
Pulley
SMC Lite Steel Locking
Carabiners
PMI® EZ-Bend Rope
Maillon Rapide Screw Link
Date Used Use/Maintenance Comments Name
Pigeon Mountain Industries, Inc. | PO Box 803, LaFayette, GA 30278 | Fax: 706-764-1531 | Email: [email protected]
equipment inspection log
SOLUTIONS & KITS KITS
PMIROPE.COM 1-800-282-ROPE
T
In order to use your haul system, simply remove it from the storage
bag, extend the system to the desired length, clip the carabiner on each
end to the anchor and the load respectively, and pull on the haul line.
It’s that easy!
To use the haul system in the 4:1 mechanical advantage conguration,
the Advance Tech HX pulley with the progress capture is attached
to the anchor and the Advance Tech mate (no progress capture) is
attached to the load. Just reverse the ends (ip end to end) to use the
system in a 5:1 mechanical advantage conguration. (See diagrams on
the right.)
The progress capture cam will capture the progress as the load is
raised, allowing for easily moving one’s hands for the next pull on the
haul line. The cam can be parked to allow the system to run freely
without using the progress capture feature. It can also be released by
pulling on the attached lanyard. See the Advance HX pulley instructions
for details of these features.
For strengths, certications, detailed usage information, inspection,
maintenance, and retirement information, please refer to the included
user instructions for each component included in this kit.
PMI has earned ISO 9001 registration from SGS United
Kingdom Limited. Constant monitoring of materials
and processes are an essential part of our ISO Quality
Management System.
All PMI Life Safety Ropes are built to meet Cordage
Institute Standards for Life Safety Ropes and other
Standards as noted.
USING YOUR HAUL SYSTEM
RETIREMENT CRITERIA
INSPECTION & MAINTENANCE
Refer to the individual component user instructions included with
this kit for retirement criteria for each component. Should the system
not operate smoothly for any reason or if there are any indications
of abnormal wear, refer to the individual component instructions
for guidance on performing a detailed inspection to determine if the
component or system should be retired.
Refer to the individual component user instructions included with this
kit for inspection and maintenance procedures for each component.
4:1 Conguration
5:1 Conguration
Dieses Handbuch passt für folgende Modelle
1
Andere PMI Sicherheitssensor Handbücher
