PNI PNI House 900 Bedienungsanleitung
Video doorphone with IP
PNI House 900
1
1. Main features EN
ŸSimple and attractive design
ŸSmartlink technology for easy settings
ŸH.264 video compression
ŸHD 720P image
ŸNight vision due to the included 6 IR LEDs
ŸIR-CUT
ŸFull Duplex audio between outside unit and smartphone trough dedicated
app
ŸNoise and echo canceling function
ŸSupports local recording on a micro SD memory card of max 64GB
(acquired separately)
Ÿ Supports picture taking and storing on smartphone
Ÿ Yoosee dedicated app for Android and iOS devices
Ÿ Wireless or cable connection to the internet
Ÿ PIR sensor included
Ÿ Indoor bell with 52 tones
Ÿ Supports lock connection and remote control trough dedicated app
Ÿ The pack includes one outdoor unit with video camera and an indoor bell
Ÿ IP66 waterproof outdoor unit
2. Device description
Indoor bell
Tone selection
button
Volume adjustment
button
Battery compartment
Bell
LEDs
2
EN
IR LEDs
PIR sensor
IR LEDs
Video camera
Ring button
Speacker
Microphone
Reset button
12V power
input
LAN RJ45
Access control
connections
(5 pins):
1: 12V NO(Blue)
2: GND(Black)
3: 12V NC(Red)
4: + push button(Green)
5: - push button(White)
Access control connections (5 wires):
- 1 + 2 pins: NO(12V) Circuit to connect a Fail Secure lock
- 2 + 3 pins: NC(12V) Circuit to connect here a Fail Safe lock
-4 + 5 pins: connect here a push button
Outdoor unit (video camera)
Installation sugestions
EN
Note: If you wish to use the device in a more complex access control system
that includes a lock and/or push button we recommend calling an authorized
person with knowledge in the field, and can understand and conect technical
terms and schematics.
3
4
3. Memory card installation EN
ATTENTION: We recommend setting and testing the product before drilling
any holes in the wall.
Indoor bell:
Ÿmeasure the distance between the back holes of the bell then insert 2 nails
in the wall according to that distance
Ÿhang the bell on the wall on the 2 nails
Outdoor unit:
Ÿremove plastic cover of the unit by removing the bottom screw
Ÿplace the plastic cover on the wall and mark the holes with a pencil
Ÿdrill holes in the wall on the marks then insert pegs in them
Ÿplace the plastic cover on the wall with the screws included
Ÿplace the outdoor unit in the plastic cover and fasten it with the bottom
screw
Note: If you wish to use the device in a more complex access control system
that includes a lock and/or push button we recommend calling an authorized
person with knowledge in the field.
4. Mounting the device
The outdoor unit support local recording of
images on a micro SD memory card that you
can buy separately. We recommend using
class 4 or higher max 64GB memory card.
To insert in the memory card in the outdoor
unit you have to remove the 4 screws on the
back of the unit then insert the card in the
dedicated slot in the indicated direction on the
main board.
Memory card slot
Note: If the product has a seal on one of the screws you can remove it to insert
the memory card without losing the warranty of the product.
5
5. Adding and accessing the device from a smartphone EN
The device can be remotely accessed from a smartphone or tablet trough
the internet and the dedicated Yoosee app (available for Android and iOS).
1. Download and install the app from Google Play or App Store searching
Yoosee app or by scanning the bellow code:
2. Create a new user account: select “Register by email” option then insert
your email address and the desired password.
Android iOS
6
3. Add the device in the app: you can add the device trough
Smartlink or Manual option.
Wifi connection method:
EN
Acasa-WIFI
ŸWait for the device to connect.
ŸOnce found the device, on the screen will appear a new window where you
can insert a name for the device and it’s access password (default
password is 123123). Select "Save".
ŸPress "+" button then select "Smartlink" option.
ŸPower the outdoor unit then press “Next”.
ŸInsert the WiFi network password (make sure the phone is connected to
the same Wifi network you wish to use the device with). Press Next.
7
Notes:
ŸUse Smartlink option only after powering the device
ŸBecause of the complex auto-configure procedure and interferences you
will maybe need to try the procedure a few times before succeeding Start
the procedure again after resetting the device.
ŸSmartlink option does not support Wi-Fi 5G
Reset procedure: press the reset button for 10-20 then wait 60 sec for the
device to restart.
LAN connection method :
ŸPower the outdoor unit
ŸConnect the outdoor unit to the local LAN network (trough a router or
switch) using an ethernet cable
ŸMake sure the phone is connected to the same network as the outdoor unit
(wireless router).
ŸOpen App on phone
EN
ŸThe app will look and find the devices in the same network automatically
Select the device
ŸPress + button to add the device then insert a name for it and it’s access
password (default password is 123123). Select "Save".
ŸIf the procedure was successful you will be able to see the image from the
device on the screen and the Online status.
Note: Repeat the procedure if it did not work.
If the procedure was successful you will be able to see the image
from the device on the screen and the Online status.
8
EN
label of the device.
ŸPower the outdoor unit
ŸConnect the outdoor unit to the local LAN network (trough a router or
switch) using an ethernet cable
ŸMake sure the phone is connected to the same network as the outdoor unit
(wireless router). Open App on phone
ŸPress + button then select “Manual Add” option.
ŸInsert the ID found on the back of the unit, desired name and access
password (default password is 123123). The ID and password of the
product are on label on the back of the outdoor unit.
ŸIf the procedure was successful you will be able to see the image from the
device on the screen and the Online status.
Available option in the preview window: 1 - arm/disarm system; 2 - change
password alert; 3 - view recordings (on the memory card); 4 - camera settings;
5 - edit camera; 6 - device list; 7 - event log; 8 - view captured photos (stored on
phone); 9 - general settings;
Camera access password: After a few times the app will ask you to change
the camera access password for security reasons. To do this access the
camera settings. White the new password on a piece of paper in case you
forget it. To reset the password, in case you forgot it, you have to reset the
device then redo the configuration in the app from the beginning.
Delete device: long press on the image of the device then select “Delete”
option.
When using LAN connection you can also use “Manual Add”
option to add the device in the app using the information on the back
1 2 3 4 5
6789
9
6. Using instructions
When someone comes to visit and presses the
call button on the outdoor unit you will receive an
alert on your phone, similar to a phone call.
ATTENTION: You have to have your phone
connected to the internet and the app on to be able
to receive alerts from the device.
To access the device during an alert glide your
finger on the screen to the green button. You will be
able to see the live image from the device on the
screen and have access to a few option described
bellow.
View image
full screen
Enable/disable
microphone
Take photo
Open/close lock
(if it is connected)
Enable/disable
speaker
EN
Full screen view:
1 - select image resolution
2 - open/close lock
3 - enable/disable speaker
4 - enable/disable
microphone
5 - take photo
6 - go back to device list
7 - go back to previous menu
1 2 3 4 5 6 7
Inhaltsverzeichnis
Sprachen:
Andere PNI Gegensprechanlage Handbücher
PNI
PNI SafeHome PT720MW Bedienungsanleitung
PNI
PNI SafeHome PT720MW Bedienungsanleitung
PNI
PNI SafeHome PT710B Bedienungsanleitung
PNI
PNI SafeHome IDB005 Bedienungsanleitung
PNI
PNI SafeHome PT710B Bedienungsanleitung
PNI
PNI DF-926 Bedienungsanleitung
PNI
PNI Safe House IDB12 Bedienungsanleitung
PNI
PNI House 910 WiFi Bedienungsanleitung
