Polaris Universal Luxx Bedienungsanleitung
Installaon Manual
Please read this manual before installing this product.
Navigaon & User manual: Available to
download from:
www.polarisgps.com.au
2
Thank you for purchasing the Universal Luxx.
Before installing, be sure to thoroughly read these instrucons.
Warranty for this product is 3 years from date of purchase, however warranty will be void if:
• The unit is tampered with, damaged or modied in anyway.
• If applicable Reverse camera cable is cut or modied in any way.
• If applicable Reverse camera is subjected to over voltage.
• If applicable the Navigaon SD card is damaged or tampered with in any way (this includes in-
stalling foreign mapping or soware onto the SD card).
• The installaon of 3rd party apps that may cause harm to the unit.
Warranty Terms
The Universal Luxx is covered for 3 years and includes:
• Defecve Equipment • Defecve Cables
Not Covered under warranty:
• Abuse
• Improper installaon
• Alteraon to Cables (includes cung of any cables)
• Accidents
• Water damage
• Improper use
• Labour
• Postage and Handling
If you have any quesons concerning the installaon, warranty or the operaon of the unit, please
contact Polaris on 1300 555 514.
We hope that you enjoy the Universal Luxx
3
Table of Contents
Warranty Details 2
What’s in the box? 4
Wiring Diagram 4-5
Installaon notes 6
Reverse Camera wiring diagram 7
Second Camera Input 7
3 camera operaon 8
Mounng the unit 8
Steering Wheel Controls 9-10
Installing 3rd party apps 11
Returns Procedure 12
Please note: once the unit is installed you can access your user manual on the head unit or you
can download a copy from our website: www.polarisgps.com.au
Record your serial number here and keep on hand for future records:
4
What's in the Box & Wiring Diagram
1) Universal Luxx Unit.
2) Main Power Harness (universal ISO connector)
3) GPS External Antenna.
4) External Bluetooth Microphone.
5) RR,RL,FR,FL Aud Out & SUB / VID out 1&2 cable.
6) VID in / AUX L / AUX R cable.
7) CAM in / Front CAM IN cable.
8) 2 x USB cables / Bluetooth mic input cable.
9) Polaris Reverse Camera with RCA adaptor.
Power Harness
Connects to
Universal Luxx
Universal
ISO plug
No. Colour Funcon
1Green Speaker Le Rear (+)
2Green with black stripe Speaker le rear (-)
3White Speaker le front (+)
4White with black stripe Speaker le front (-)
5Grey Speaker right front (+)
6Grey with black stripe Speaker right front (-)
7Purple Speaker right rear (+)
8Purple with black stripe Speaker right rear (-)
9Red 12V to ignion (ACC power On)
10 Black Ground (-)
11 Blue Auto Antenna Control (+)
12 Orange Illuminaon / Dimmer
13 Yellow +12V to baery
The Universal Luxx comes with a universal ISO connector. This means that you can purchase a
secondary harness for certain model vehicles so that the unit becomes plug and play. We can try
and source it for you or you can source it yourself. If you cannot nd a secondary harness to t, you
can simply cut the ISO plug o and hardwire it into your vehicle. Please refer the wiring diagram on
page 5. PLEASE NOTE: The Aerpro harnesses we source sll need Steering wheel controls hardwired
and programmed in.
Universal ISO plug
5
Wiring Diagram
Please see installaon notes on page 6.
Universal Luxx
Wiring diagram
6
The wiring and installaon of this unit requires special technical skill and experience. If you do
not feel condent installing this product or do not have the level of skill necessary, please
contact Polaris on 1300 555 514 so we can refer to a recommended installer.
Unfortunately we do not have the colour codes of every vehicle. To nd the correct wires to
tap into, our installers use the following items:
- Test lamp (to nd power).
- Mulmeter (to nd steering wheel control wires).
- 9 volt baery (to nd the speaker wires).
This unit is designed to be used in a vehicle with a 12 volt baery and a negave grounding.
Before installing this unit to a recreaonal vehicle, bus, or truck, make sure the baery
voltage is appropriate for this unit to be used. If installing into a 24Volt vehicle , you will need
a 10 amp converter which can be purchased through automove electronic shops such as
Jaycar electronics.
To avoid short circuit in the electrical system, ensure that the negave baery cable is
disconnected before installaon.
To avoid possibility of shorng out the electrical circuit in the unit, never connect the baery
wire directly to the vehicle baery.
Always secure all wirings with cable clamps or adhesive tape to prevent short circuit.
Please make sure all wiring connecons and speaker wires are well insulated.
When pulling the dash apart, please use quality trim tools to avoid damaging your dash.
Please do NOT cut any plugs o of any Polaris cameras. Doing so will void your warranty! If
you need to blend other brand cameras into our system, please call Polaris on 1300 555 514
so we can refer you to a recommended dealer who has the skill and experience in performing
this type of work.
If you want the reverse camera to trigger when reverse gear is engaged, you will need to nd
reverse power. Once you have found reverse power, connect the reversing wire (tagged as
reverse-in) to it.
Some vehicles will require extra parts such as:
- Fascia's to make the double din chassis t nice and neatly.
- CAN bus modules to retain steering wheel controls or other original features of the car.
- modules to retain a factory amp.
Holden vehicles with MyLink will require a special CAN bus module.
Most European vehicles will require a CAN bus module to retain steering wheel controls.
If there is something you are not 100% sure about when installing this unit, please give our
experienced technicians a call on 1300 555 514.
Installaon Notes
7
Reverse Camera wiring
H
Back of Universal Luxx
Red = 12 Volt posive
Black = Ground
Cam In
Universal Luxx Loom
Reversing wire (orange wire with
black stripe) needs to be wired to
Reverse Light posive to trigger the
camera when the vehicle is in reverse.
2 cam operaon (e.g., car and caravan setup or front
camera)
H
Back of Universal Luxx
Front Cam In
Red = 12 Volt posive (suggested
source: Accessories power)
Black = Ground
We don’t suggest picking up power
from the front cam in power wires.
Somemes the 12 volt is not strong
enough to power some cameras.
Even though the actual input is labelled as front camera, you can sll use this input for a second reverse camera. The actual
head unit has an icon on the screen labelled CAM and this can toggle between the 2 cameras installed (regardless if it’s a
front camera or a second rear vision camera). If you want 3 cameras then we suggest purchasing a 2 way control box, see
page 8)
Toggling between the 2 cameras without a Control Box
When you engage reverse the unit will always default to your tow vehicle reverse camera, to toggle to your second rear
camera while the vehicle is in reverse press the buon on your head unit.
To view any of the cameras whilst driving, select the Cam icon. It will default to the second camera automacally and if you
wish to view your tow vehicle reverse camera, press the on the touch screen.
8
Yellow: Acc+
Green: Reverse Light +
Blue: Reverse in from Luxx
(see g. 2)
Black: Ground
Camera 1
Camera 2
Not used
Video 2 out
Universal Luxx loom
Micro switch (dash
mounted)
Connect to CAM IN on the back of
Universal Luxx
(must be plugged into V2 out to view 2 cameras)
Control box
Figure 1
Figure 2
Reverse in
Blue wire from
Control box
3 camera operaon (Example: Car and caravan setup with a
front camera).
Front Camera
Use the front camera input to plug your front camera in (see page 7)
Control Box Setup:
Use the control box setup to plug an addional 2 cameras into the head unit when the front camera input Is already being
used
9
Steering Wheel Controls
Installaon
Steering wheel controls should work for all non CAN bus vehicles provided that Key 1,
Key 2 and steering wheel ground have been hardwired in properly according to your
specic vehicle.
Some CAN bus vehicles will work with a specic module, please call Polaris to see if we
have a soluon for your vehicle.
Programming in your steering wheel controls
Select Wheel Key study from the main menu
Select and press one of your steering wheel controls.
Once you have selected one of your steering wheel controls, the following screen will
appear:
You can select a dierent funcon for short click and long click.
For example, if I have selected my mode buon, I can select the mode funcon as my short
click and then I can choose the ‘ok google’ funcon for my long click. When I hold down my
mode buon, ‘ok google’ will appear.
Once you have your desired sengs, press ok in the top right hand corner. You will then be
taken back to the SWC Home screen. Select the next steering wheel control that you wish
to programme in and follow the same procedure.
Keep repeang the same procedure to programme each individual SWC seng.
10
Steering Wheel Controls
Once you have programmed all your steering wheel controls in, your screen should look
similar to the one below:
Short
click
Long
click
If you have made a mistake or you wish to change the funcons you can press reset and
start the process again.
Standby
Main menu
Back to prev screen
Widgets
Volume up
Volume down
Mode
Navigaon
Radio
Mute
Bluetooth
Answer
Hang Up
Brightness
Ok Google
Stop (movie/music)
Skip Back
Skip Forward
Rewind
Fast Forward
On/o
Sound & Equalizer
Sengs
AV in
Steering Wheel Control funcons
Power/ standby Answer call Sengs
Home /main menu Hang up call AV in
Back to previous screen Brightness control Equaliser
Widgets Ok Google Radio: Scans through pre-sets
Volume Up Stop (music / movies les) Radio: Scans
Volume Down Skip previous Play / Pause (music / movie les)
Mode Skip forward Radio: Change bands
Navigaon Rewind Radio: Seek up
Radio Fast Forward Radio: Seek Down
Mute Toggle loud on/o
Bluetooth Sound & Equaliser
Inhaltsverzeichnis
Andere Polaris Auto-Navigationssystem Handbücher
Beliebte Auto-Navigationssystem Handbücher anderer Marken
Sanyo
Sanyo NVM-4030 - Easy Street - Automotive GPS... Bedienungsanleitung
Kenwood
Kenwood DNN991HD Bedienungsanleitung
AvMap
AvMap Geosat 2C Bedienungsanleitung
Eonon
Eonon GE01B Bedienungsanleitung
Pioneer
Pioneer AVIC-Z920DAB Bedienungsanleitung
Nextar
Nextar M3-MX - Automotive GPS Receiver Bedienungsanleitung
Furrion
Furrion NV2200 Bedienungsanleitung
Mio
Mio MOOV 200-Series Bedienungsanleitung
Prestigio
Prestigio GeoVision 5150 Bedienungsanleitung
Hummer
Hummer 2006 H3 Bedienungsanleitung
Magellan
Magellan Maestro 4210 - Automotive GPS Receiver Konfigurationshandbuch
Garmin
Garmin StreetPilot c510 Bedienungsanleitung