2.1.
3.
When the desired height is found, close the gold latch. Note, latch
tension can be adjusted (see adjustments section).
2.
Next, raise the camera up until the lens is centered on the matte
box.
Be careful to keep your
ngers out from under the riser and
ensure a solid grip on the camera as this will create a pinch point
if the camera is released when not yet locked into position.
Available offset range 32.5mm to 54.8mm.
1.
When using a matte box mounted to the rods, the camera will need
to be raised to line up optical centers. Open the small gold latch on
the right side of the quick-release by depressing the black secondary
lock button on the latch and swinging it open 90-degrees.
Riser
U S E R G U I D E
/ V 1 / 2 0 2 2
10
Setting up the handles, shoulder pad,
camera installation, and riser.
Setup
