Politec Sandor S Series Leitfaden

Installation

And commissioning

manual

Series S

Double Beam

Index

Main components list Pag. 3

Installation reccomendations Pag. 4

Mounting the bracket Pag. 5

Installation example Pag. 6

Positioning the beam with respect to others in the perimeter Pag. 7

Alignment Pag. 8

Vertical alignment of the mirror Pag. 8

Horizontal alignment of the mirror Pag. 8

Cabling and terminal connections Pag. 9

Transmitters main P.C.B. Pag. 9

Receivers main P.C.B. Pag. 10

Set-up using the test point on the main Transmitter P.C.B. Pag. 11

Set-up using the test point on the main receiver P.C.B. Pag. 14

Set up examples Pag. 15

Alignment checking Pag. 16

Setting and programming Pag. 17

Functional description of the led’s Pag. 17

Operational characteristics and Link setting Pag. 18

Technical specifications Pag. 19

Main component list

N°

Parte Q.ty Description

1 1 Mounting plate

2 1 Front cover

3 2 Front cover

top/end caps

4 2 Trasmitter /

receiver optic

5 1 Flat cable

6 1 Receiver /

trasmitter P.C.B.

7 4 Bracket

Installation reccomendations

• Verify that the beam tower is fully watertight once the cover and end caps have

been correctly filled at the end of the installation.

• Use the cable glands supplied on the tower for all cabling must pass through the

lower end cap using the cable glands supplied.

• Avoid any type of obstruction between the transmitter and receiver.

• Avoid installing the receivers beams in a position where direct sunlight, at the same

angle as the receivers beams, can enter directly into optics especially at sunset and

sunrise

• Do not install multiple beams where the transmitter beam can interfere with other

receiver beams. It is always better place either transmitter or receivers back to

back.

• Do not use switched power supplies which can induce noise on the power supply

voltage which can in turn be amplified by the optical sync electronics creating

unwanted problems.

Mounting the bracket

Insert the bracket back to

mounting plate

Wall mounting

Diameter 50 mm

Pole

mounting

Installation example

Pole

mounting Wall

mounting Wall mounting

With interposed

brakets

Positioning beam with respect to others in the

perimeter

Alignment

Initial alignment

Once beam columns have been correctly installed point the transmitter optics towards its

corresponding receiver and vice versa, repeat for all the beam pairs.

This is achieved by manually positioning the lens holder horizontally and vertically using

one of the two screws (which ever is more convenient) to be found above the lens.

Vertical alignment

Horizontal alignment

Cabling and terminal connections

TRANSMITTERS

MAIN P.C.B.

Always use screened multicore cable for alarm output, power supply 12

dc, relè output, And, Tamper connection

Always use separate power supply 24 V ac cable of proper diameter

Cabling and terminal connections

RECEIVERS

MAIN P.C.B.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Politec Beleuchtungsausrüstung Handbücher

Politec

Politec ALES WS Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung