Politec NAT SENSOR Bedienungsanleitung

DUAL TECHNOLOGY

SENSOR

(PIR + Microwave)

Outdoor use

INSTALLATION MANUAL

Politec S.r.l. | Installation manual NAT SENSOR –Ver. 1.10.1

INDEX

DESCRIPTION

Pag. 3

NAT MOTHERBOARD

Pag. 4

MOUNTING

Pag. 5

WALL MOUNTING

Pag. 5

WALL MOUNT WITH “L” BRACKET

Pag. 6

COVER AREA

Pag. 7

PROGRAMMING AND OPERATION

Pag. 8

ADDITIONAL FEATURES

Pag. 9

OPEN FIELD FUNCTION

Pag. 9

EXPOSED AREA FUNCTION

Pag. 9

IR ANTI-MASK FUNCTION

Pag. 9

MICROWAVE ANTI-MASK FUNCTION

Pag. 9

SECURITY FUNCTION

Pag. 10

DESCRIPTION OF NOT SETTABLE FUNCTION

Pag. 10

PET IMMUNITY SYSTEM

Pag. 10

SELF-DIAGNOSIS SYSTEM

Pag. 10

AUTO-THERMINAL SYSTEM

Pag. 10

AUTO-ENVIRONMENTAL SYSTEM

Pag. 10

APPLICATION

Pag. 11

PIR LIMITER

Pag. 13

MOUNTING

Pag. 15

TECHNICAL SPECIFICATION

Pag. 16

Politec S.r.l. | Installation manual NAT SENSOR –Ver. 1.10.1

1. DESCRIPTION

Dual Technology Sensor (PIR + Microwave).

AND operation in the prevention of "false alarms".

IP65 (indoor and outdoor).

Mount directly to the wall or by "L" bracket.

Sensibility adjustable PIR with angular aperture of about 6 °.

Microwave K-band 24 GHz.

IR range adjustable from 0 to 12m.

MW range adjustable from 0 to 12m.

Function and output ANTI-MASKING for infrared and microwave.

RF immunity up to 2Ghz.

Pet Immunity.

Small size (135mm x 33mm x 40mm)

Processing digital signals of PIR and MW.

Temperature Autocompensation.

Environmental Autocompensation.

EXPOSED AREA function.

Operativity Self scanning of PIR technology.

Operativity Self scanning of MW technology.

Tamper output combined anti- removal and anti-tear.

Autolettura e compensazione digitale dell’alimentazione

Politec S.r.l. | Installation manual NAT SENSOR –Ver. 1.10.1

NAT MOTHERBOARD

POWER SUPPLY

10-16 Vcc –GND

Pay attention to the

polarity.

ANTI-MASK

(anti open collector

negative)

Negative always

opens in the event of

masking.

OPEN FIELD

(Positive input)

Connect the positive

signal + increases

the MW sensitivity

TAMPER

(N.C. tamper

output)

It opens in case of

sensor tampering.

ALARM

(N.C. alarm output)

It opens in case of

detection MW+IR.

TAMPER

BUTTONS

(anti-removal and

anti-tear)

If they get open give

the opening of N.C.

DIP SWITCHES

System

configuration.

TRIMMER MW

rotating in clockwise

increases the range

(sensibility) of MW.

TRIMMER IR

rotating in clockwise

increases the range

(sensibility) of IR.

RED LED

(ALARM)

lit up when there is a

general alarm, if

enabled.

YELLOW LED

(PIR)

lit up when there is a

PIR alarm, if

enabled.

BLUE LED

(MW)

lit up when there is a

Microwave alarm, if

enabled.

MICROWAVE

24GHZ

Detection sensor

MW.

PYROELECTRIC

SENSOR

Detection sensor IR.

GND

Politec S.r.l. | Installation manual NAT SENSOR –Ver. 1.10.1

2. MOUNTING

The mounting of the NAT can occur in two modes or directly to the wall through the plate or "L"

through the mounting bracket angular.

WALL MOUNTING

1. Insert the shielded cable alarm in the fixing plate;

2. Fix the plate at wall;

3. Drill hole in the rubber nut and slide inside the cable;

4. Screw the base on the plate;

5. Fix the NAT motherboard on the support base and connect wires;

6. After the wiring and operation test close NAT sure that the seals and the O-rings are present and not

damaged to ensure the integrity of the product.

Politec S.r.l. | Installation manual NAT SENSOR –Ver. 1.10.1

WALL MOUNT WITH “L” BRACKET

1. Insert the shielded alarm cable into the slots of the bracket angle and fasten it to the wall;

2. pass the cable through the mounting plate;

3. fix the plate to the fastening bracket angle;

4. Drill hole in the rubber nut and slide inside the cable;

5. Screw the base on the plate;

6. Fix the NAT motherboard on the support base and connect wires;

7. After the wiring and operation test close (7) NAT sure that the seals and the O-rings are present and not

damaged to ensure the integrity of the product.

Politec S.r.l. | Installation manual NAT SENSOR –Ver. 1.10.1

3. COVERAGE AREA

SIDE VIEW

VIEW FROM ABOVE

NB: the system can also detect the areas underlying the sensor Nat adjusting the range (sensitivity) of the

two technologies (see below).

NB: the detecting area can change of some meters depending on the installation height of sensor and

surrounding environment.

Politec S.r.l. | Installation manual NAT SENSOR –Ver. 1.10.1

4. PROGRAMMIN AND OPERATION

Install the sensor Nat between 2 and 3 meters in height from the floor concerned following the

instructions on page 4. Connect the power supply according to polarity (10-16Vdc) and connect the

outputs Alarm, Tamper and Anti-Mask in central according to their usage requirements.

+/GND

Power supply of NAT 10/16Vdc.

ANTI-

MASK

Negative open collector. Opens in

the event of masking.

Aumento sensibilità microonda

se fornito un positivo

TMP

N.C. Tamper output. It opens in

case of sensor tampering.

ALARM

N.C. Alarm output. It opens in

case of detection MW+IR.

POWER LED ON FOR DETECTION TEST

Turn on the dipswitch number 4 for the

functionality of the LEDs detection.

NB: power on for the duration of about 30

seconds if the DIP4 of the LEDs is activated you

will see an alternate flashing of these, to stabilize

the system. Term of flashes you can proceed with

the following settings.

PIR RANGE (SENSITIVITY) 1-12m

REGULATION TRIMMER: Adjust the PIR

range through the trimmer, implementing with

crossing test. Submitting ORANGE LED will

help to verify the detection of the passage in

different areas (exp. 0m, 4m, 7m, 12m). Test the

goodness of the coverage of the affected areas, by

adjusting the MW.

MW RANGE

(SENSITIVITY) 1-12m

REGULATION

TRIMMER: Adjust the

microwave range through

the trimmer, implementing

with crossing test.

Submitting GREEN LED

will help to verify the

detection of the passage in

different areas (exp. 0m, 4m,

7m, 12m). Test the goodness

of the coverage of the

affected areas, by adjusting

the PIR.

5 6

Politec S.r.l. | Installation manual NAT SENSOR –Ver. 1.10.1

5. ADDITIONAL FEATURES

OPEN FIELD FUNCTION

By applying a positive to TERMINAL 4 it will increase the microwave sensitivity for "a open field

applications"

In this way, the implemented algorithm takes advantage of the absence of walls and windows allowing the

adjustment at a great distance (12 meters).

N.B.: Usethis function only in case of installation "in the open field" (see example 2 on p. 10); perform

the microwave sensitivity settings by checking the maximum range.

EXPOSED AREA FUNCTION

Leaving DIPSWITCH 1 in position OFF, the sensor is set for an outdoor installation with no shelter (canopies,

arcade, …) and so directly exposed to strong atmospheric agents (rain, snow, …).

With this feature activated, the system if necessary self performs the function “ENVIRONMENTAL

COMPENSATION”, adjusting its own detecting parameters, avoiding false alarms.

IR ANTI-MASK FUNCTION

Turn the dipswitch number 2 for the functionality ANTI-MASK. Activating this function when an object is

placed in front of the sensor to blind it and make it ineffective, an active infrared system checks for the

presence of these in 3 seconds and gives an output signal through dedicated. The anti-mask microwave

verification of the presence of an object check in 20 seconds the presence of an object and gives an output

dedicated.

N.B.: If DIP 2 (anti-mask) and 4 (LED) are activated when it comes in a stealth mode, led blinking green-

orange alert the opening of the contact ANTI-MASK.

WARNING: When activated the DIP 2 before leaving the installation spot, you MUST close the sensor NAT

and you MUST power down and power up the entire system.

MICROWAVE ANTI-MASK FUNCTION

If DIPSWITCH 2 is in position ON, you can enable the MICROWAVE ANTI-MASK FUNCTION

positioning the DIPSWITCH 1 in ON.

NB: if DIP1 ON function

EXPOSED AREA disabled.

NB: if DIP1 ON function

EXPOSED AREA disabled.

Politec S.r.l. | Installation manual NAT SENSOR –Ver. 1.10.1

SECURITY FUNCTION

Turn on the dipswitch number 3 functionality SECURITY. Activating this function if the MW sensor provides

at least 7 distinct surveys in 30 seconds, the alarm signal from a system independently of the PIR sensor

readings. Dually the IR sensor provides at least 4 separate surveys in 30 seconds, the system by an alarm

signal regardless of the sensor readings MW.

When the test and programming are ended turn off the LED settings provide to secure the cover.

6. DESCRIPTION OF NOT SETTABLE FUNCTION

PET IMMUNITY SYSTEM

The system of pet immunity is able to discriminate the small animals up to a maximum of 10kg and not to

give an alarm signal. In the case of animals such as dogs and cats perform function tests.

SELF-DIAGNOSIS SYSTEM

The system will periodically check every 50sec about the functionality of the microwave and PIR system. In

case of Malfunction of one of the two detection equipment, this is signaled by the flashing of the LED

dedicated (GREEN and ORANGE for MW for IR), steadily. In this condition the system excludes the

operation of the technology is not working and the detection will continue to be present in the OR mode.

AUTO-THERMAL SYSTEM

The system detects the temperature of the surrounding environment through a dedicated sensor and modify

the detection parameters of the IR sensor in order to adapt to extreme environmental conditions.

AUTO-ENVIRONMENTAL SYSTEM

The system locates in the case of heavy rains and snowfall an environmental condition "different" after about

20 seconds and is able to adapt the system to the detection threshold by changing the parameters of both

technologies for the duration of the event.

Andere Handbücher für NAT SENSOR

Inhaltsverzeichnis

Andere Politec Sicherheitssystem Handbücher

Politec

Politec ALES Series Bedienungsanleitung

Politec

Politec ALES 60 Bedienungsanleitung

Politec

Politec SANDOR DUAL SMA Bedienungsanleitung

Politec

Politec PARVIS MES SMA Series Bedienungsanleitung

Politec

Politec PARVIS HYBRID SMA Bedienungsanleitung

Politec

Politec MANA MW Handbuch

Politec

Politec SANDOR QUAD ESA SMA Handbuch

Politec

Politec PARVIS WS SMA Bedienungsanleitung

Politec

Politec PARVIS MES SMA Handbuch

Politec

Politec ALES WS Handbuch

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung