Polsen HCA-10MB Bedienungsanleitung

1
-10MB
BLUETOOTH
HEADSET
AROUND-EAR
WITH MICROPHONE
PRODUCT
MANUAL

2
AROUND-EAR
BLUETOOTH HEADSET
WITH MICROPHONE
HCA-10MB
CONTENTS
Introduction�����������������������������������������������������������������������������������������������������������3
Precautions �����������������������������������������������������������������������������������������������������������4
Overview�����������������������������������������������������������������������������������������������������������������5
Charging the HCA-10MB ����������������������������������������������������������������������������������6
Turning On the HCA-10MB ������������������������������������������������������������������������������6
Pairing and Connecting ������������������������������������������������������������������������������������7
Wearing the Headset���������������������������������������������������������������������������������������� 8
Controlling Audio Playback����������������������������������������������������������������������������� 8
Using the Call Functions����������������������������������������������������������������������������9-10
Troubleshooting��������������������������������������������������������������������������������������������11-14
Specications �����������������������������������������������������������������������������������������������������15
One-Year Limited Warranty���������������������������������������������������������������������������16

3
THANK YOU FOR CHOOSING POLSEN.
This Bluetooth headset makes it easy for you to wirelessly play your music and manage your
phone calls� Ideal for use with your Bluetooth-enabled mobile phone, you can connect it to
nearly any compatible Bluetooth device, including computers and MP3 players� It’s simple to
set up and operate, and it features a unique multifunction-button/control-dial system for
audio playback and call functions� The headset delivers clear, dynamic sound with cushioned
around-ear cups that provide isolation, allowing you to enjoy your music in comfort without
extraneous distractions�
Among the benets you’ll enjoy:
• Control audio playback:play/pause, next/last track, and volume control
• Manage phone calls:send, accept, ignore, and redial
• Audio switch function:switch the audio from the headset to your phone mid-call without
interrupting the Bluetooth connection
• Internal USB-rechargeable battery

4
PRECAUTIONS
• Please read and follow these instructions and keep this manual in a safe place�
• Keep this product out of the reach of children�
• Be mindful of your surrounding environment when using this product� Do not use this
product while driving an automobile, operating machinery, or performing other tasks that
require your undivided attention�
• Keep this product away from pacemakers and similar implanted devices� This product’s
internal magnets may cause harmful interference�
• Exposure to high sound levels can cause permanent hearing loss� Avoid listening at high
volumes for extended periods of time�
• This product is not water resistant� Keep it away from rain, snow, humidity, and general
moisture� Do not use this product if it becomes wet�
• Do not use or store this product in ammable conditions (such as environments containing
ammable gases or liquid chemicals). This can damage the headset, start a re, or cause an
electrical shock�
• Do not expose this product to open ames or dispose of it in a re. Doing so can cause the
internal battery to explode�
• Do not store or use this product at temperatures above 113ºF (45ºC).
• Clean this product with only a soft, dry cloth�
• In order to prolong the headset’s battery life, turn off the headset after use�
• To avoid damaging the headset, turn it off before extended periods of disuse, and charge the
battery at least once every 12 months�
• All photos are for illustrative purposes only�
�

5
OVERVIEW
1. Multifunction button
2. Control dial
3. USB Micro-B charging port
4. Microphone
5. Status LED
6. USB Standard-A male to
Micro-B male charging cable
1.
2.
3.
4.
B
6.
5.

6
CHARGING THE HCA-10MB
Before using the HCA-10MB for the rst time, you will need to charge it. To charge the
HCA-10MB, use the included USB cable to plug the headset into a USB power source� The USB
power source can be your computer or a USB power adapter (not included).
When the HCA-10MB is charging, the status LED will glow red� When charging is complete, the
status LED will glow white� Charging time should take approximately three hours�
Note: Before using the HCA-10MB for the rst time, charge it for at least six hours.
TURNING ON THE HCA-10MB
To turn on the HCA-10MB, press and hold the multifunction button� The headset will emit a
beep upon powering on� The status LED will glow white and then blink red once� The headset
will then proceed to emit a couple of beeps, and the status LED will continue to blink white�
To turn off the HCA-10MB, press and hold the multifunction button until the headset emits a
series of descending tones, and the status LED glows white and then powers off�
Low-power warning: When battery power is low, the status LED will ash red, and the
headset will emit three successive beeps�

7
PAIRING AND CONNECTING
The rst time you use the HCA-10MB with your device, you will need to pair them. Pairing
registers the headset with your device and saves the headset’s Bluetooth prole for future
use� After pairing, you will be able to automatically connect the HCA-10MB to your device� This
makes it faster for you to connect the headset and your device in the future�
To pair the HCA-10MB with your device, follow these steps:
1. Make sure the headset is powered off�
2. Press and hold the multifunction button for approximately eight seconds, until the headset
emits two beeps and the status LED alternately ashes white and red. The headset is now
discoverable�
3. On your device, enter Bluetooth settings and search for Bluetooth devices�
4. Select “HCA-10MB” when it appears on the list of discovered Bluetooth devices�
Note:If your device requires you to enter a code in order to pair it with the headset, enter
0000 (four zeroes).
5. After successfully pairing and connecting, the headset will emit two beeps, and the status
LED will blink white�
Note:For more information on your device’s Bluetooth capabilities, consult your device’s user
manual�

8
WEARING THE HEADSET
Wear the headset with the controls on your right side�
Adjust the headset’s t by gently sliding the ear cups up and down in their
headband slots�
CONTROLLING AUDIO PLAYBACK
You can use the HCA-10MB to wirelessly control audio playback on your Bluetooth-enabled
device�
Note:Some devices require you to open the music player or select a song� For more details,
consult your device’s instruction manual�
To play or pause your music, press the multifunction button�
To increase the volume of the headset, rotate the control dial forward and hold� To decrease
the volume of the headset, rotate the control dial backward and hold�
To skip forward one track, rotate the control dial forward and release� To skip backward one
track, rotate the control dial backward and release�

9
USING THE CALL FUNCTIONS
Once the HCA-10MB is connected to your mobile phone, you can use it to control your phone’s
call functions� This makes it easy for you to smoothly handle your phone calls with a single
button and without having to reach for your mobile phone�
To answer a call, follow these steps:
1. When a call comes in, you will hear your ring tone via the headset, and the status LED will
blink white�
If you are listening to music when a call comes in, the music will pause, and you will hear
your ring tone� Your music will resume after the phone call�
Note:When receiving an incoming call, some mobile phones may require you to manually
select the Bluetooth headset as the audio source�
2. Press the multifunction button to answer the phone�
To hang up, press the multifunction button again� The headset will emit a beep and hang up�
To redial your mobile phone’s most recent outgoing call, press and hold the multifunction
button for three seconds and then release� The headset will emit a beep and redial the last
number�
To ignore an incoming call, press and hold the multifunction button for two seconds and then
release�

10
Switch function:During a phone call, you can switch from the headset to your phone via
the headset’s multifunction button� This is a convenient way to make a quick swap without
disconnecting or turning off the headset or accessing the phone’s Bluetooth menu�
To switch from the headset to your phone, follow these steps:
1. During a phone call, press and hold the headset’s multifunction button until the headset
emits a beep� The audio will switch to the phone, and you will be able to use the phone
instead of the headset�
2. To switch back to the headset, press and hold the headset’s multifunction button� The
headset will emit a beep, and you will be able to use the headset again�
Inhaltsverzeichnis
Andere Polsen Headset Handbücher


















