Poly G10-T Handbuch

Poly G10-T

SETUP SHEET

See the Regulatory Notices for all regulatory and safety guidance prior to conguration.

Avant de procéder à la conguration, veuillez consulter les Avis de réglementation, an de prendre connaissance des recommandations en matière de sécurité et de réglementation.

Get Started

Before you begin, make sure that you have the following:

• Network preparation (See Prepare your environment for Microsoft Teams Rooms)

• Microsoft Teams Room License (See your Oce 365 Admin Center and Licenses for Microsoft Teams Rooms)

• Account credentials (See Congure accounts for Microsoft Teams Rooms)

• USB keyboard and mouse

• Display HDMI cable(s)

• Phillips #1 screwdriver and athead screwdriver

Unpack the Poly GC8, Conferencing PC, 10 m USB-A to USB-C cable, and mounting kit (if applicable) from their boxes.

For support, go to Poly Support.

For Warranty information, see the Polycom Product Warranty Guide.

support.polycom.com/mtrsetup

3725-30785-010F

1. (Optional) Mount the Conferencing PC using the mounting kit. Refer to the Poly G10

Series, Poly G40 Series, and Poly G85 Series PC Mounting Kit Setup Sheet.

2. Remove the bottom panel from the Poly GC8: loosen the screw with a Phillips #1

screwdriver, turn the GC8 faceup, press the rubber circles on each side, and slide

the panel o.

3. Remove the cable guard from the Poly GC8 using a flathead screwdriver.

4. Using the supplied USB-A to USB-C cable, connect the Conferencing PC (USB-A) to

the Poly GC8 (USB-C). See the cabling diagram on page 3.

5. (Optional) Connect an audio device to the Poly GC8 (using a USB-A cable) and to

Power over Ethernet (if needed).

6. (Optional) Connect an additional PC/laptop for content sharing to Poly GC8 (using

an HDMI/HDMI Mini cable).

7. Replace the cable guard in the Poly GC8 and replace the bottom planel and tighten

the screw.

8. Connect a USB camera and display (using an HDMI cable) to the Conferencing PC.

9. (Optional) Connect a second display to the Conferencing PC.

10. Connect the Conferencing PC to Ethernet.

11. Connect the keyboard and mouse to the Conferencing PC.

12. Plug in and power on the Poly GC8 and then plug in and power on the other

components.

The Conferencing PC may reboot more than once. Do not shut down the

Conferencing PC during this process.

13. Complete the Windows Out-of-Box Setup using your keyboard and mouse. See Initial

setup for Microsoft Teams Rooms.

a. Choose your region.

b. Choose your keyboard layout.

c. Add a second keyboard. Select Skip.

The Conferencing PC reboots and then loads Microsoft Teams Rooms.

14. Complete the Microsoft Teams Rooms Out-of-Box Setup.

a. Accept the Microsoft Software License Terms.

b. Enter your Microsoft Teams Rooms account information. See Congure

accounts for Microsoft Teams Rooms.

c. Select the appropriate Supported Meeting Mode based on the preferred default

application.

• Skype for Business (default) and Microsoft Teams

• Skype for Business and Microsoft Teams (default)

• Skype for Business only

d. Enable Modern Authentication.

e. Complete Exchange sign-in if your mailbox has an alternate SMTP address.

f. Click Finish.

The system restarts.

The Conferencing PC may reboot more than once. Do not shut down the

Conferencing PC during this process. When complete, the Microsoft Teams Rooms

Setup screen appears on the GC8.

This product cannot be connected directly to the telecommunications circuits (or public wireless LANs) of any telecommunication carriers (e.g., mobile communications carriers, xed communications carriers,

or internet providers). In the case of connecting this product to the Internet, be sure to connect it via a router.

15. Complete your conguration. For detailed instructions, see Initial setup for

Microsoft Teams Rooms.

a. Click More > Settings.

b. Enter admin password: sfb

c. Congure additional settings.

• Account: Correct or change the email or password, if needed.

• Device: Enable Dual monitor mode if using a second monitor.

• Peripherals:

»Change audio devices, if necessary.

»Speaker for Conferencing and Default Speaker are the same.

»When using the “magic whiteboard” functionality, content cameras

can be congured. Note that this is not the People camera, which is set

automatically by the Microsoft Teams Rooms application. See Content

camera for Microsoft Teams Rooms.

When complete, the Conferencing PC reboots one more time.

16. After connecting all peripherals to the system, perform a Windows Update. When

the Poly GC8 requires updates, the screen turns black while the rmware is

updating, which can take up to 5 minutes. After the rmware updates, the Poly

GC8 restarts and returns to regular operation automatically.

Accessibility Features

For information on software accessibility features, see Accessibility support for

Microsoft Teams.

The Poly GC8 provides a 3.5 mm audio out jack so that people who are hard of hearing

can use third-party assistive technology peripherals.

Connect the optional Icron USB Extension Solution

Connect the Icron USB Extension Solution to extend USB 3.1 devices over a single CAT

cable.

To connect the optional Icron USB Extension Solution:

1. Connect the USB-B end of the USB 3.1 cable to the Local Extender (LEX) and

connect the other end to the Conferencing PC.

2. Power on the Local Extender (LEX).

3. Connect one end of the Ethernet CAT-6a/7 cable to the Local Extender (LEX) and

connect the other end to the Remote Extender (REX).

4. Power on the Remote Extender (REX).

5. Connect the USB-A end of the USB 3.1 cable to the Remote Extender (REX) and

connect the USB-C end to the Poly GC8.

Inc. and any use of the mark by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners.

Andere Poly Konferenzsystem Handbücher

Poly

Poly G7500 Bedienungsanleitung

Poly

Poly G40-T Handbuch

Poly

Poly Studio R30 Bedienungsanleitung

Poly

Poly G7500 Service-Handbuch

Poly

Poly Studio R30 Bedienungsanleitung

Poly

Poly Studio Bedienungsanleitung

Poly

Poly G10-T Handbuch

Poly

Poly Studio R30 Bedienungsanleitung

Poly

Poly G7500 Bedienungsanleitung

Poly

Poly G7500 Bedienungsanleitung

Poly

Poly Studio R30 Handbuch

Poly

Poly Trio 8800 Bedienungsanleitung

Poly

Poly Studio P21 Bedienungsanleitung

Poly

Poly Rove B2 Bedienungsanleitung

Poly

Poly G7500 Betriebsanleitung

Poly

Poly G7500 Service-Handbuch

Poly

Poly Polycom RealPresence Group Series Bedienungsanleitung

Poly

Poly Medialign Single Display Frame Bedienungsanleitung

Poly

Poly G40-T Handbuch

Poly

Poly Studio X Series Bedienungsanleitung

Poly

Poly G7500 Bedienungsanleitung

Poly

Poly Large Room Kit Handbuch

Poly

Poly G7500 Bedienungsanleitung

Poly

Poly G7500 Service-Handbuch

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung

AXIWI

AXIWI AT-350 Bedienungsanleitung

AT&T

AT&T Spirit Communications System Installationsanleitung