Poly Voyager 5200 Series Bedienungsanleitung

Voyager 5200 Series

Wireless Headset System

User Guide

Contents

Headset overview 3

Be safe 3

Charge your headset 4

Check battery level 4

Low battery warnings 5

Use charge case 6

Fit 7

Pair your phone 8

Pair to mobile device 8

NFC pairing 8

Pair Another Phone 8

The Basics 9

Make/Take/End Calls 9

Adjust the volume 9

Mute 9

Voice assistant 10

Enable and use Amazon Alexa (smartphone feature) 10

Play or pause audio 10

Use sensors 10

Advanced features 12

Enable Tile 12

Adjust voice alert volume 12

Load software 13

Update your Poly device 13

Troubleshooting 14

What's in the box 15

Accessories 16

Support 17

Siri /

Google Assistant

Alexa*

NFC

Volume

Mute

Alexa* Amazon Alexa (requires Plantronics Hub mobile app)

Call

Bluetooth pairing

Siri, Google

Assistant

Default voice assistant

NFC Near Field Communication (available on select models)

Charge port

Power

Indicator light

Please read the safety guide for important safety, charging, battery and regulatory

information before using your new device.

Headset overview

Be safe

Your new headset has enough power to pair and make a few calls directly out of the box. It

takes approximately 90 minutes to fully charge the headset; the indicator light turns off

once charging is complete.

A micro USB cable is supplied to allow you to charge the headset with an AC wall charger

(not included) or through a PC's USB port. The PC must be powered on to charge via USB

2.0 or higher.

NOTE Always charge at near room temperatures; never charge battery at temperatures below

0°C (32°F) or above 40°C (104°F).

1Check your earbud battery level:

• Listen to the voice prompt when you remove your earbuds from case and put them on.

• View battery level in BackBeat app. Download at poly.com/software.

Voice prompt Listen time

"Battery high" 3 hours or more

"Battery medium" 1 to 3 hours

"Battery low" 10 minutes to 1 hour

"Battery critical" Less than 10 minutes

2Check the charge case battery level by pressing the charge case button and viewing the

LED inside the case.

Charge case LED Battery level

Battery high

Battery medium

Battery low

Battery critical

Charge your headset

Check battery level

Battery Level Voice Prompt

30 minutes of talk time remaining "Battery Low" repeats every 15 minutes

10 minutes of talk time remaining "Recharge Headset" every 5 minutes

Low battery warnings

A fully charged case can recharge your headset fully two times for an additional 14 hours

of headset talk time.

IMPORTANT The charge case is placed in deep sleep mode after manufacturing to save power

and protect the battery. To wake-up the charge case, plug it into a power source for a minimum of

1 minute. The LED's flash when charging.

Check the charge case battery status by pressing the button on the side.

Battery status LEDs for charge case

Battery high

Battery medium

Battery low

Battery critical; Recharge case/headset

NOTE Charge case is sold separately. Visit poly.com/accessories for more information.

Use charge case

1Slide headset over and behind your ear, then press gently toward your ear.

NOTE Remove your eyeglasses before donning the headset for best fit.

2Rotate microphone boom until it is pointed toward your mouth.

3Mic boom moves up and down for a better fit.

2 3

Change the eartip for a better fit.

1Push in eartip and rotate to the left to unlock it.

2Align new eartip into slot; push, rotate to the right and lock into place.

To wear the headset on your other ear, rotate the boom upwards then twist it around so

the eartip is on the other side before lowering the mic boom.

Fit

1To put your headset in pair mode, press the Call button until you hear "pairing" and the

headset LEDs flash blue and red.

2Activate Bluetooth on your phone and set it to search for new devices.

•iPhone Settings > Bluetooth > On*

•Android Settings > Bluetooth On > Scan for devices*

NOTE *Menus may vary by device.

3Select “Poly V5200 Series.”

Once successfully paired, you hear “pairing successful” and the headset LEDs stop flashing.

NOTE Your headset can pair with up to 8 devices but only maintain 2 connections

simultaneously; this includes the Bluetooth adapter.

NOTE This feature is available on select models

NFC pairing is an option if you have no more than one other device already connected.

NFC pairing will not work if there are two devices connected already.

1On your mobile phone ensure NFC is enabled and your phone’s display is unlocked.

(Phones may vary and some phones may not have NFC support.)

2With the headset powered on, lay the headset on the back of phone near the NFC tag on

phone as shown until NFC pairing completes. If necessary, accept the connection.

After pairing your headset to your phone, you may want to pair another phone.

1Power on your headset.

2Choose:

• Press and hold the Call button until you hear "pairing"

3Activate Bluetooth on your phone and set it to search for new devices.

4Select “Poly V5200 Series.”

If necessary, enter four zeros (0000) for the passcode or accept the connection.

Once successfully paired, you hear “pairing successful” and the headset indicator lights

stop flashing.

Pair your phone

Pair to mobile device

NFC pairing

Pair Another Phone

Siri /

Google Assistant

Alexa*

NFC

Answer a call

• Put the headset on to answer a call, or

• Say “answer” after call is announced, or

• Tap the Call button.

End a call

• Tap the Call button.

Reject incoming call

• Press the Call button for 2 seconds.

Redial last outgoing call

Double-tap the Call button.

Caller Announcement (mobile phone only)

When wearing your headset, you will hear the name of a contact calling so you can decide

whether to answer or ignore the call without having to check the phone screen.

An incoming caller name is announced:

• if your phone supports Phone Book Access Profile (PBAP)

• if you granted access to your contacts during pairing process (for many mobile phones, this

is preset out-of-the box and may not be necessary)

• if the caller is stored in the phone's contacts list

An incoming caller name is not announced: if the caller is unknown, unlisted, blocked, or

the language is not supported.

Toggle the Volume button up (+) or down (–) during a call or while streaming audio.

While not on a call or streaming audio you can toggle the Volume button to adjust the

volume level for Caller Announce and other voice prompts.

During an active call, tap the Mute button to mute or unmute your headset.

The Basics

Make/Take/End Calls

Adjust the volume

Mute

Siri, Google Assistant™, Cortana Press and hold the Call button for 2 seconds to activate

your phone's default voice assistant. Wait for the phone prompt to activate voice dialing,

search, and other smartphone voice controls.

With Alexa enabled on your headset, you can ask for directions, call friends, access Alexa

Skills and more.

NOTE Amazon Alexa isn't available in all languages and countries.

1Enable Alexa

A Pair the headset to your mobile device

B Download or update your Plantronics Hub mobile app (software) if necessary.

Download: poly.com/software

C Launch Plantronics Hub app and ensure that your headset (firmware) is up-to-date

D From Plantronics Hub main menu, choose Apps > Amazon Alexa > Enable

E Launch the Amazon Alexa app and follow the instructions to set up your headset

2Use Alexa

A To use Alexa, tap the Mute button (when not on a call) and ask a question. You hear a

tone when Alexa is activated.

Tap the Call button to pause or resume streaming audio.

NOTE Functionality varies by application. May not function with web-based apps.

Smart sensors respond when you put on or take off your headset. Customize in Poly Lens

App. Below describes default settings.

With active sensors putting on the headset will: taking off the headset will:

Mobile/softphone call answer the call keep call in headset

Music/media resume music/media (if

playing previous to taking off)*

pause music/media (if

playing)*

Lock headset unlock the Call button lock the Call button to avoid

accidental calls

NOTE *Functionality varies by application. May not function with web-based apps.

Reset sensors

You may need to reset the sensors if they are not working as expected.

• Wearing the headset, tap the Call button to test sensors. A talk time voice alert means

sensors are working. A tone or lack of voice prompts means sensors need to be reset.

• To reset the sensors, power on the headset, connect the headset to a USB cable and plug

the cable into your computer's USB port or an AC wall adapter (not included). Then place

the headset on a flat, non-metallic surface for more than 10 seconds.

Voice assistant

Enable and use

Amazon Alexa

(smartphone feature)

Play or pause audio

Use sensors

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Poly Headset Handbücher

Poly

Poly Savi 8240 Office Bedienungsanleitung

Poly

Poly Plantronics Voyager Focus UC Bedienungsanleitung

Poly

Poly VOYAGER SURROUND 85 UC Bedienungsanleitung

Poly

Poly Savi 8210 Office Bedienungsanleitung

Poly

Poly Savi 8240 Office Bedienungsanleitung

Poly

Poly Savi 7310 UC Bedienungsanleitung

Poly

Poly Blackwire 5200 Series Bedienungsanleitung

Poly

Poly Blackwire 3300 Series Bedienungsanleitung

Poly

Poly Voyager Surround 80 UC Bedienungsanleitung

Poly

Poly Plantronics Voyager 5200 Office Bedienungsanleitung

Poly

Poly Voyager Focus 2 UC Series Bedienungsanleitung

Poly

Poly Savi 8245 UC Bedienungsanleitung

Poly

Poly Savi 8410 Office Bedienungsanleitung

Poly

Poly Voyager 8200 UC Bedienungsanleitung

Poly

Poly Voyager Surround 80 UC Bedienungsanleitung

Poly

Poly Plantronics Voyager 5200 Office Bedienungsanleitung

Poly

Poly Voyager 8200 UC Bedienungsanleitung

Poly

Poly EncorePro 500 USB Series Bedienungsanleitung

Poly

Poly Voyager Focus 2 Bedienungsanleitung

Poly

Poly Savi 8210 Office Bedienungsanleitung

Poly

Poly Voyager 6200 UC Bedienungsanleitung

Poly

Poly Plantronics Voyager 5200 Office Bedienungsanleitung

Poly

Poly Savi 8210 Office Bedienungsanleitung

Poly

Poly Savi 7310 Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung

Southwing

Southwing SA505 Bedienungsanleitung