Poly 03A Bedienungsanleitung

Zhaoqing Dinghu Huyou Health and Rehabilitation Products Co., Ltd.

Manufacturing Address: HuYou Industrial Park, Guicheng Town, Dinghu District, Zhaoqing

City, Guangdong Prpvomce, P.R. China, 526070

http://www.chinawheelchair.com

http://www.polywheelchair.com

http://www.poly-medical.com

Infrared Thermometer 03A:

(Forehead Temperature Type)

User's Manual

Please read the user's manual closely before using!

E-mail:

[email protected]

TABLE OF CONTENTS

Ⅰ.Product Introduction and classification-------------------------------------------------------------------2

Ⅱ.Basic Working Principle-------------------------------------------------------------------------------------2

Ⅲ.Product Features---------------------------------------------------------------------------------------------2

Ⅳ. Main Technical Specification------------------------------------------------------------------------------3

Ⅴ.Basic Component & figure Structure(As Shown) ------------------------------------------------------3

Ⅵ.Instruction-----------------------------------------------------------------------------------------------------3

Ⅶ.Configuration------------------------------------------------------------------------------------------------4

Ⅷ.Precautions--------------------------------------------------------------------------------------------------5

Ⅸ.Storage & Transportation----------------------------------------------------------------------------------5

Ⅺ:Calibration Method------------------------------------------------------------------------------------------6

Ⅻ.Quality Warranty & Service------------------------------------------------------------------------------6

Infrared Thermometer 03A：

(Forehead Temperature Type)

This product complies with EN60601-1, EN12470-5 required standard

Ⅰ.Product Introduction and classification

This infrared forehead temperature sensor is a kind of body temperature sensor based on infrared ray transmission

and reception principle. It is convenient to aim the detection window at one’s forehead when using it, which will

get the body temperature in a quick and exact way. Product Classification:

Product Classification: B

Ⅱ.Basic Working Principle

Any object in which temperature is higher than absolute zero degree will transmit some infrared radiation energy

according to its own temperature. The radiation energy and its distribution per wavelength are closely associated

with its surface temperature. The wavelength transmitted by human body(temperature 36~37℃)is 9~13 ūm. Based

on the principle, it is possible to measure the forehead surface temperature and then adjust the offset between

forehead temperature and actual body temperature, which will result in the correct display of body temperature.

Ⅲ.Product Features

Special design for body & forehead temperature with working temperature and forehead temperature dynamic

compensation.

HEIMANN infrared detection probe is exclusively applied to improve measurement

precision and performance stability.

Optional model provides reminder functionality when body temperature is higher than limit value.

32-Reading Data Storage

LED Digital Display

Two Temperature Systems including Fahrenheit and Celsius

Automatic Shutdown Power saving functionality

Small Size, Reasonable structure and easy operation.

Ⅳ. Main Technical Specification

(1) Normal Working Condition:

Working Temperature:10~40℃ Relative

Temperature:≤85%. Power:DC3V (2pcs AA Batteries)

power consumption: ≤50mw

(2) Dimensions:

159mm* 38mm * 89mm (Length*Width*Height)

(3) Weight:119g(no battery)

(4) Display Accuracy:0.1℃

(5) Measurement Range:30~50℃

(6) Consumption Power: ≤50mw

(7) Display Error: Under Normal Environment:+0.2℃

Above Normal Environment: +0.3℃

(8) Response Time: ≤0.5 second

(9) Measurement Distance:50~100mm (10)Automatic Shut Down Time:6 seconds

Ⅴ.Basic Component & figure Structure(As Shown)

Ⅵ.Instruction

Aim the detecting probe at forehead and press the measurement button in the handle, which will start on the

power automatically and then the result will be displayed.

Ⅶ.Configuration

(1) Temperature System Selection

1.Keep pressing configuration button for more than 3 seconds and then F1 is displayed on LED.

2.Press“+” button once to select Celsius(℃)

3.Press“-”button to select Fahrenheit(℉)

(2)Warning Threshold Value Setup

1.Keep pressing configuration button for more than 3 seconds and then F1 is displayed on LED.

2.Press configuration button once again to display F2

3.Press “+” button once to increase warning threshold value by 0.1℃ each time.

4.Press “-” button to decrease warning threshold value by 0.1℃ each time.

Note: Warning threshold value is between 33.0℃ and 40.0℃,the default value is 37.5 ℃.

(3)Display Mode Switch between Forehead Temperature & Body Temperature.

1.Keep pressing configuration button for more than 3 seconds and then F1 is display on LED.

2.Press configuration button twice to display F3.

3.Press “+” button to display “1”, which means that it will display forehead temperature.

4. Press “-” button to display “0”, which means that it will display body temperature. Note: The display

result of body temperature is based on dynamic compensation working temperature and forehead

temperature.

(4)Integer Offset Value Setup

1.Keep pressing configuration button for more than 3 seconds to display F1 ON LED.

2.Press configuration button three times to display F4.

3.Press “+” to increase warning threshold value by 0.1℃ 4.Press “--” button to

decrease warning threshold value by 0.1℃.

Note: The actual temperature may be adjusted according to the actual measurement distance and measurement

environment, which adjustment range varies between -0.3 ℃ and +0.3℃. For example, the body temperature

result is 35.9℃ in same special environment, while the actual body temperature is 36.6℃.In this case, you may

get the correct result 36.6℃ using the F4 setup value.

(5)Voice identification Setup

1. Keep pressing configuration button for more than 4 seconds and then F5 is display on LED.

2. The “1” symbol showing, press the “—“ button then it transfer to “0” , closing the voice identification.

3. Press “+ “ back to “1 “ symbol and keep the voice identification setting.

(6)Quit Configuration Mode

1.Keep pressing configuration button for more than 3 seconds to display F1 on 4 LED.

2.Press configuration button four times to quit configuration mode.

(7)Battery Replacement

Display: When the signal “Battery” is displayed on LED, it means that the batteries are almost running out power.

Operation: Open battery cover and replace the old batteries with two pieces of new AA-5 alkaline

batteries.

Ⅷ.Precautions

(1) Fence glass for detection probe is most possible to be destroyed, which shall Be destroyed, which shall be

protected carefully.

(2) Cleaning method for detection probe: wipe it gently with cotton swab or soft cloth with water or alcohol.

(3) The battery must not be recharged or disposes of in fire. Please dispose of it in appointed reclaimed place, Using

disqualified battery may cause fire or explosion.

(4) Special Notice: The batteries shall be taken out if this product will be not used for a long period of time.

(5) This product must be protected against water or direct sun light.

(6) Avoid dropping or impacting the product, otherwise it may be damaged.

(7) The battery should be taken out when the product is invalidated. (No special circumstances required)

Ⅸ.Storage & Transportation

The forehead temperature sensor with packaging shall be stored in a well-ventilated room free of corrosive gases,

with a temperature of -25~55℃ and a relative humidity of not higher than 90%.Sling,stress,drench or trample on the

package shall be avoided during transportation and loading/unloading. Besides, it shall be placed according to the

marked direction on the packaging. Ⅹ.Products Troubleshooting

symptom of machine

failure

solution other method

Measured

temperature lower or higher

1. View whether the function key “F4”

has been changed, the factory default

value is 0.0.

2.The machine can automatically

compensate for ambient temperature

variations, but if the ambient temperature

changes too much or test in a high-

temperature environments then quickly

transfer to a low-temperature

environments, the equipment required to be

kept in a stable environment for 10 ~ 30

minutes for the next measurement. Note:

the effective measurement of distance is 5

to 10cm

1. To the designated

maintenance department for

repair

2. Return to distributors,

dealers, then transfer to the

factory for repair or replace.

Key trigger invalid, no

response

Do not self-demolish thermometer

Same as above

No display or display lack

of strokes

Do not self-demolish thermometer

Same as above

No voice prompts

See whether the voice prompts switch is

Same as above

turned on, identification: “1” is turn on

the sound, “0” is off the sound;

Press measuring key

is invalid, no

response

1.Low battery, please replace the new

battery;

2.Whether the battery polarity is correctly

installed.

Ⅺ:Calibration Method

Frequency: Calibrated one time in one month.

Calibration methods: via Clinical thermometers (such as the axillary mercury thermometer) measurement the

temperature, to compare the result testing by this machine. If the deviation is too large, it can be offset

compensation key “F4” to fix the correct value.

Note:

If the measurement results is large different from the temperature tested by the Clinical thermometers, the machine

should immediately be calibrated.

Ⅻ.Quality Warranty & Service

The product is warranted for 1 year from date of purchase.

Warning: this warranty dose not cover damages caused by abnormal use or unauthorized disassembly.

Note: Please properly keep the warranty card and purchase document for future guarantee.

*.List of Accessories

This product complies with EN60601-1, EN12470-5 required standard

Instruction Manual 1 PC

Warranty Card 1 PC

Inhaltsverzeichnis

Andere Poly Thermometer Handbücher

Poly

Poly 03B Bedienungsanleitung

Beliebte Thermometer Handbücher anderer Marken

Delton

Delton 981A Bedienungsanleitung

Baker

Baker MM2P Bedienungsanleitung

Tarmo

Tarmo 320281 Bedienungsanleitung

Citizen

Citizen CTD 504 Bedienungsanleitung

TFA

TFA 14.1500 Bedienungsanleitung

Vive

Vive DMD1010 Bedienungsanleitung

Gotemp

Gotemp THB4002 Bedienungsanleitung

GREISINGER

GREISINGER G 1202 Bedienungsanleitung

Amprobe

Amprobe TMD-53W Bedienungsanleitung

Trotec

Trotec BP10 Bedienungsanleitung

Radiance instruments

Radiance instruments RT616 Series Bedienungsanleitung

Eurolec

Eurolec IR151 Bedienungsanleitung

Scaneo

Scaneo TS42B Bedienungsanleitung

Sper scientific

Sper scientific 800043 Bedienungsanleitung

Motorola

Motorola MBP69SN Konfigurationshandbuch

The MeatStick

The MeatStick The MeatStick Bedienungsanleitung

Hama

Hama TH35-A Bedienungsanleitung

Veridian Healthcare

Veridian Healthcare 09-349 Bedienungsanleitung