Polycom ViaVideo Bedienungsanleitung

Getting Started with ViaVideo 1

Welcome to Polycom ViaVideo

Welcome to the world of Polycom®ViaVideoTM desktop video communications.

This booklet gets you started with installing the ViaVideo software and setting up the

hardware.

Warning: For ViaVideo to operate correctly, you must install the software first.

Please do not set up the hardware before you install the software from the CD.

First, check that you received all of the ViaVideo equipment in the ViaVideo box.

The following shows the equipment that is shipped in the box.

Second, ensure you have the following hardware and software. These are required to

install and use the ViaVideo hardware and software.

ViaVideo unit

USB cable

Power supply cable

Camera base

Mounting disks

Audio cable

Cable manager

Getting Started

PC_Getting_Started.fm Page 1 Tuesday, August 22, 2000 1:33 PM

2Getting Started with ViaVideo

Hardware Requirements

The following are the minimum hardware requirements:

•USBport

• 350 MHz processor, Pentium®II class compatible with MMX

•64MBRAM

• 4 MB video memory

• 100 MB available hard disk space (might be less depending on whether you

have any of the required software already installed)

• SVGA monitor (800 x 600)

• 16-bit color or higher

• Desktop PC: Headphones or external speakers required

Laptop PC: Headphones or internal speakers required

• Broadband (64K and above) IP network access.

Software Requirements

To use ViaVideo, you must have Microsoft® Windows® 98 version 1 or version 2

installed.

As part of the installation process, ViaVideo also checks for the following required

software. If the software is not present, ViaVideo installs it.

• MacromediaTM FlashTM

• DirectX®7

• Adobe Acrobat ReaderTM version 4

• Microsoft database support (ODBC)

Installing ViaVideo

To install ViaVideo, you must install the software before you set up the hardware.

Installing Software

To install the ViaVideo software:

1. Insert the ViaVideo CD into the CD-ROM drive.

2. Follow the instructions on the installation screens.

3. When software installation is complete, you can set up the ViaVideo hardware.

PC_Getting_Started.fm Page 2 Tuesday, August 22, 2000 1:33 PM

Getting Started with ViaVideo 3

Installing Hardware

Warning: Install the ViaVideo software before you set up the hardware. The

software contains drivers that must be installed before you install the hardware. The

following diagram shows how to install the hardware.

PC_Getting_Started.fm Page 3 Tuesday, August 22, 2000 1:33 PM

4Getting Started with ViaVideo

The following graphic shows the various possible audio connections.

PC_Getting_Started.fm Page 4 Tuesday, August 22, 2000 1:33 PM

Getting Started with ViaVideo 5

Start ViaVideo

To start ViaVideo, turn on the ViaVideo camera unit, double click on the ViaVideo

icon on your desktop, and you’re ready to make a call.

For more information about making calls with ViaVideo, click on the User’s Guide

link on the first screen of the ViaVideo installation CD. This opens the user

documentation.

PC_Getting_Started.fm Page 5 Tuesday, August 22, 2000 1:33 PM

6Getting Started with ViaVideo

Important Information

No part of this document may be reproduced or transmitted in any form or by any means,

electronic or mechanical, for any purpose, without the express written permission of Polycom,

Inc.

Polycom, Inc. retains title to, and ownership of, all proprietary rights with respect to the

software contained within its products. The software is protected by United States copyright

laws and international treaty provision.

Every effort has been made to ensure that the information in this manual is accurate. Polycom,

Inc. is not responsible for printing or clerical errors. Information in this document is subject to

change without notice.

Other Restrictions

You shall not and shall not allow any third party to decompile, disassemble, or otherwise

reverse-engineer or attempt to reconstruct or discover any source code or underlying ideas or

algorithms of the software by any means whatsoever.

Trademark Information

Polycom®, the Polycom logo design, and ViaVideoTM are either registered trademarks or

trademarks of Polycom, Inc.

Microsoft®, Windows®, and DirectX®are either registered trademarks or trademarks of

Microsoft Corporation. Adobe Acrobat ReaderTM is a trademark of Adobe Systems

Incorporated. Pentium® is a registered trademark of Intel Corporation.

ViaVideo contains Macromedia Flash Player Software by Macromedia, Inc.,

and Flash are trademarks of Macromedia, Inc.

All other brand and product names are trademarks or registered trademarks of their respective

companies.

Patent Information

The accompanying product is protected by one or more U.S. and foreign patents and patents

pending held by Polycom, Inc.

Warranty

Polycom, Inc. warrants its products to be free of defects in materials and factory workmanship

for a period of twelve (12) months from the date of purchase. This warranty does not apply to

damage to products resulting from accident, misuse, service or modification by anyone other

than a Polycom, Inc. authorized service facility/dealer. The warranty is limited to the original

purchaser and is not transferable. Any liability of Polycom, Inc. or its suppliers with respect to

the product or the performance thereof under any warranty, negligence, strict liability or other

theory will be limited exclusively to product repair or replacement as provided above. Except

for the foregoing, the product is provided “as is” without warranty of any kind including without

limitation, any warranty of merchantability or fitness for a particular purpose. The entire risk of

the quality and performance of the software programs contained in the system is with you.

PC_Getting_Started.fm Page 6 Tuesday, August 22, 2000 1:33 PM

Getting Started with ViaVideo 7

Limitation of Remedies and Damages

Polycom, Inc., its agents, employees, suppliers, dealers and other authorized representatives

shall not be responsible or liable with respect to the product or any other subject matter related

thereto under any contract, negligence, strict liability or other theory for any indirect, incidental,

or consequential damages, including, but not limited to loss of information, business, or profits.

The law of certain states or nations does not permit limitation or exclusion of implied warranties

and consequential damages, so the above limitations, disclaimers, or exclusion may not apply

to you. This warranty gives you special legal rights. You may also have other rights that vary

by state and nation.

Important Safeguards

Read and understand the following instructions before using the system:

• Close supervision is necessary when the system is used by or near children. Do not leave unat-

tended while in use.

• Only use electrical extension cords with a current rating at least equal to that of the system.

• Always disconnect the system from power before cleaning and servicing and when not in use.

• Do not spray liquids directly onto the system when cleaning. Always apply the liquid first to a

static free cloth.

• Do not immerse the system in any liquid or place any liquids on it.

• Do not disassemble this system (except as instructed in the manufacturer's instructions). To

reduce the risk of shock and to maintain the warranty on the system, a qualified technician

must perform service or repair work.

• Keep ventilation openings free of any obstructions.

• Save these instructions.

Regulatory Notices

FCC Notice

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorientate or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

PC_Getting_Started.fm Page 7 Tuesday, August 22, 2000 1:33 PM

8Getting Started with ViaVideo

• Consult the dealer for help.

Changes or modifications not expressly approved by Polycom could void the user's authority to

operate this equipment. If you experience trouble with this equipment, please contact your

equipment provider for repair/warranty information. If your equipment is causing harm to the

telephone network, the telephone company may request that you disconnect the equipment until

the problem is resolved.

There are no user serviceable parts inside the ViaVideo or power supply.

Underwriters’ Laboratories’ Statement

The system is intended to be powered only by the supplied power supply unit.

RADVision Statement

PC_Getting_Started.fm Page 8 Tuesday, August 22, 2000 1:33 PM

Andere Handbücher für ViaVideo

Inhaltsverzeichnis

Andere Polycom Konferenzsystem Handbücher

Polycom

Polycom Instructor FS HDX Gebrauchsanweisung

Polycom

Polycom HDX 9001 Gebrauchsanweisung

Polycom

Polycom RealPresence Group Bedienungsanleitung

Polycom

Polycom RealPresence RMX 4000 Datenblatt

Polycom

Polycom SoundStation 7000 Bedienungsanleitung

Polycom

Polycom HDX 8000 series Bedienungsanleitung

Polycom

Polycom VSX Series Service-Handbuch

Polycom

Polycom RealPresence Group Series Bedienerhandbuch

Polycom

Polycom V2IU 5300-E Bedienungsanleitung

Polycom

Polycom VIEWSTATION EX Bedienungsanleitung

Polycom

Polycom NOT FOUND VTX 1000 Anleitung zur Verwendung

Polycom

Polycom RealPresence RMX 4000 Montageanleitung

Polycom

Polycom ViaVideo Bedienungsanleitung

Polycom

Polycom IPOWER 9000 Montageanleitung

Polycom

Polycom QSX Bedienungsanleitung

Polycom

Polycom VIEWSTATION Einrichtungshandbuch

Polycom

Polycom VS4000 Bedienungsanleitung

Polycom

Polycom QSX Bedienungsanleitung

Polycom

Polycom Vortex EF2280 Bedienungsanleitung

Polycom

Polycom EagleEye Director Gebrauchsanweisung

Polycom

Polycom RMX DOC2557C Montageanleitung

Polycom

Polycom G7500 Service-Handbuch

Polycom

Polycom RealPresence RMX 4000 Datenblatt

Polycom

Polycom VSX VSX 6000 Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Inmarsat

Inmarsat mini M Bedienungsanleitung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung