PolyVision Eno Bedienungsanleitung

Fixed Wall Arm

Installation Guide

Part number 2002003-001 Rev A

ēno one Fixed Wall Arm

2 Installation and Operation Guide

Table of contents

Overview ........................................................................................................................................................ 3

Important considerations ............................................................................................................................ 3

Tools and supplies ......................................................................................................................................... 5

What comes in the box............................................................................................................................... 5

Required items ........................................................................................................................................... 6

Suggested hardware for the wall bracket.................................................................................................... 7

Install the fixed wall arm ................................................................................................................................. 8

Step 0: Install the whiteboard ..................................................................................................................... 8

Step 1: Position the fixed wall arm.............................................................................................................. 8

Step 2: Locate and mark fastener locations on the wall.............................................................................. 9

ēno classic interactive whiteboards.......................................................................................................... 9

ēno click interactive whiteboards ........................................................................................................... 10

In-wall cable routing............................................................................................................................... 10

Step 3: Fasten the wall bracket to the wall ............................................................................................... 11

Wood stud installation ........................................................................................................................... 11

Metal stud installation ............................................................................................................................ 12

Hollow concrete/brick wall installation.................................................................................................... 13

Solid concrete/brick wall installation....................................................................................................... 13

Step 4: Assemble the boom arm, cover, and breakaway plate ................................................................. 14

Step 5: Fasten the breakaway plate to the boom arm ..............................................................................15

Step 6: Fasten the boom arm/breakaway assembly to the wall bracket ................................................... 16

Step 7: Prepare the projector adapter plate.............................................................................................. 16

Step 8: Fasten the projector mount to the boom arm ............................................................................... 17

Step 9: Fasten the projector adapter plate to the projector....................................................................... 18

Step 10: Fasten the projector to the boom arm ........................................................................................ 19

Step 11: Connect cables to the projector and add the magnetic icon strip to the whiteboard .................. 20

Cable strain relief ................................................................................................................................... 20

Step 12: Power on the projector............................................................................................................... 21

Projector adjustment and driver installation .................................................................................................. 22

Step 13: Troubleshooting projector focus and alignment..........................................................................22

Focus .................................................................................................................................................... 22

Image size ............................................................................................................................................. 22

Image location (left to right).................................................................................................................... 23

Image tilt................................................................................................................................................ 23

Image location (up and down)................................................................................................................ 24

Final check ............................................................................................................................................ 25

Step 14: Install the PolyVision Driver Projector Add-in .............................................................................. 25

Index ............................................................................................................................................................ 26

ēno one Fixed Wall Arm

PolyVision 3

Overview

Congratulations on your purchase of the PolyVision®ēno™ one solution. This manual describes how

to install the PolyVision ēno one fixed wall arm mounting solution for the PolyVision PJ905 projector.

The fixed wall arm is designed to accommodate the Polyvision PJ-905 projector only.

** DO NOT EXCEED A 15LB (7 kg) LOAD ON THE BOOM ARM TO AVOID DAMAGE **

Important considerations

• Measure the clearance height between the top of the ēno interactive whiteboard and the ceiling.

The minimum amount of clearance needed for installation is 24 inches (61cm).

• The total system without projector weighs roughly 21 pounds (9 kg).

• Two people are recommended for portions of this installation.

• The maximum allowable projector weight is 15 pounds (7 kg).

• No unauthorized modifications or additions are to be made to the system.

• Do not hang from or climb on the boom arm or wall bracket.

• Tighten all screws securely.

CAUTION

FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT

IN PROPERTY DAMAGE OR PERSONAL INJURY.

Read the entire Assembly Direction before beginning installation or assembly. Building construction

varies greatly and is outside PolyVision’s control. The Building’s Engineer of record is responsible for

the design of studs, backing, reinforcement, supporting members etc. which the units are attached

to and must verify the adequacy of the mounting hardware. These instructions and any hardware

provided by PolyVision are for convenience only and are not an indication of what may be required

by your local Code.

The building owner or designated agent is responsible for verifying that the installation is in

compliance with all local Codes and regulations.

ēno one Fixed Wall Arm

4 Installation and Operation Guide

Tools and supplies

What comes in the box

1 Wall bracket

2 Breakaway plate

3 Cover

4 Boom arm

5 PJ905 Projector

6 Projector mount and Projector adaptor plate

7 Wall template

8 Quick start guide

9 CD

10 USB Cable

11 Projector power cable

12 VGA cable

13 Hardware bag: Allen wrench, cable ties, 5/16”-18 bolts (x2), ¼” – 20 nylon nuts and washers (x2),

thumb screws (x3)

14 Magnetic projector control icon strip

56 7 8

ēno one Fixed Wall Arm

PolyVision 5

Required items

Locate and have ready to use

• Power Drill and/or Hammer drill

• Stud finder (stud walls)

• 7/16” (11mm) wrench

• #2 Phillips screw driver

• Measuring tape

• Bubble level

• Step ladder

• Wall mounting hardware for your wall type and local code

• Tape (For temporarily attaching template to the wall)

7/16”#2

ēno one Fixed Wall Arm

6 Installation and Operation Guide

Suggested hardware for the wall bracket

Note:

These instructions guide you through installing the wall bracket on wall of a sheetrock, brick, or

concrete. Use these instructions as a guideline but install appropriate anchors to secure the wall

mounting assembly according to all local codes and protocols.

Use the following hardware or equivalents for fastening the wall bracket to the wall. Follow all

manufacturer requirements for hardware instillation.

If mounting to a wood stud wall:

• Qty 3: ¼” lag screw with 7/16” hex head (11mm), 2.5” (64mm) long (for mounting to wood stud)

• Qty 2: ¼ - 20 Toggle bolts 2.5” (64mm) long (for mounting sides of wall plate to sheetrock)

• Qty 5: ¼” (7mm) ID, ½” (13mm) OD fender washer

If mounting to a metal stud wall:

• Qty 5: ¼ - 20 Toggle bolts 2.5” (64mm) long (3 for mounting to metal stud, 2 for sheetrock)

• Qty 5: ¼” (7mm) ID, ½” (13mm) OD fender washer

If mounting to a hollow concrete block or hollow brick wall:

• Qty 4: ¼ - 20 Toggle bolts 2.5” (64mm) long (for mounting to hollow concrete block)

• Qty 4: ¼” (7mm) ID, ½” (13mm) OD fender washer

If mounting to a solid concrete and solid brick wall:

• Qty 4: ¼” Concrete wall anchors 1-3/4” (45mm) long (for mounting to solid concrete and solid

brick wall)

• Qty 4: ¼” (7mm) ID, ½” (13mm) OD fender washer

ēno one Fixed Wall Arm

PolyVision 7

Install the fixed wall arm

Step 0: Install the whiteboard

• Install the ēno classic interactive whiteboard or ēno click interactive whiteboard using instructions

included with those products.

• Ensure that an electrical outlet is available for the projector.

• ēno classic interactive whiteboard: Measure and ensure that there is at least 24 inches (61cm) of

clearance between the ēno interactive whiteboard and the ceiling.

• ēno click interactive whiteboard: Ensure that there is at least 24 inches (61cm) of clearance

between the existing chalk or dry erase board and the ceiling.

Step 1: Position the fixed wall arm

To determine the correct position for the fixed wall arm:

1. Using a tape measure, locate and mark the center of the interactive whiteboard.

2. If installing on a sheetrock wall, use a stud finder to locate and mark the position of the wall

stud nearest the center mark.

ēno one Fixed Wall Arm

8 Installation and Operation Guide

Step 2: Locate and mark fastener locations on the wall

ēno classic interactive whiteboards

Note: Use the wall template provided to assure proper location of the wall mount. Failure to do so

will result in difficulty focusing and aligning the projected image.

To locate and mark fastener locations on the wall:

1. Position the bottom of the wall template so it is resting on the horizontal edge of the ēno

classic whiteboard trim.

2. Align the template as close to the center of the ēno interactive whiteboard as possible and, in

addition:

On a wood or metal stud wall, ensure that the center of a stud is aligned with at least one

column of bolt holes on the template. Adjust the template left or right to capture a stud.

On a wall with mortared bricks, ensure that the top and bottom row of bolt holes do not align

with a line of mortar.

3. Tape the wall template provided to the wall.

4. Mark bolt hole locations.

wall template for use

with ēno classic

whiteboard only

ēno one Fixed Wall Arm

PolyVision 9

ēno click interactive whiteboards

Note: To assure proper installation of the wall bracket, use the wall bracket as a template to

measure the location of bolt and cable exit holes. Failure to do so will result in difficulty focusing and

aligning the projected image.

To locate and mark fastener locations on the wall:

1. Carefully measure and position the bottom of the wall bracket assembly so it is 6 inches (15

cm) above the ēno click interactive whiteboard.

2. Align the wall bracket assembly as close to the center of the ēno click interactive whiteboard

as possible. In addition:

On a wood or metal stud wall, ensure that the center of a stud is aligned with at least one

column of bolt holes on the wall bracket assembly. Adjust the wall bracket assembly left or

right to capture a stud.

On hollow concrete or bricks wall, ensure that the top and bottom row of bolt holes on the

wall bracket assembly do not sit on top of mortar joints.

3. Mark bolt hole locations.

In-wall cable routing

For sheetrock walls, cable routing can be either:

• against the wall

• within the wall

Note: The wall template and wall bracket provide two alternative cable exit hole locations to ensure

that one of the cable exit hole locations does not align with a stud.

To route cables with-in the wall:

1. Use the wall template (for ēno classic) or wall bracket (for ēno click) to mark the position of the

cable exit hole that does not align with a wall stud.

2. Drill a hole in the sheetrock at that location.

ēno one Fixed Wall Arm

10 Installation and Operation Guide

Step 3: Fasten the wall bracket to the wall

To fasten the wall bracket to the wall:

1. Position the wall bracket on the wall matching the marks on the wall with bolt hole locations in

the bracket.

2. Ensure that the wall bracket is level and oriented upwards as indicated by the stamped up

arrow, as shown below.

3. Fasten the wall bracket to the wall using the instructions below as appropriate for your type of

wall.

Wood stud installation

1. Bolt the wall bracket assembly to the stud using three lag screws and fender washers or

equivalent, as noted on page 7.

Note: Ensure that a stud is captured on at least one column of bolt holes in the wall bracket

assembly and the fixed wall arm is as close to the center of the whiteboard as possible.

Andere Handbücher für eno

Inhaltsverzeichnis

Andere PolyVision Projektorzubehör Handbücher

PolyVision

PolyVision CopyCam Bedienungsanleitung

Beliebte Projektorzubehör Handbücher anderer Marken

Optoma

Optoma BX-AL133B Bedienungsanleitung

PEERLESS

PEERLESS PE 1120 Leitfaden

Osram

Osram SIRIUS HRI Series Handbuch

Presentation Switchers

Presentation Switchers PS111 Bedienungsanleitung

Kramer

Kramer VIA GO Bedienungsanleitung

Yamaha

Yamaha PJL-112 Stücklistenhandbuch

Swedstyle

Swedstyle CL23AA02ZA25E Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 236CB Betriebsanleitung

Epson

Epson BrightLink 475Wi Bedienungsanleitung

Acer

Acer WP100 Bedienungsanleitung

i3 i3board Bedienungsanleitung

CHIEF

CHIEF HB-43E Bedienungsanleitung

Biamp

Biamp Modena Hub Service-Handbuch

NEC

NEC MP10RX Bedienungsanleitung

Panamorph

Panamorph DCR-S3 Bedienungsanleitung

Exact solutions

Exact solutions FRAME-EVO-P10 Bedienungsanleitung

CHIEF

CHIEF VCM103S Bedienungsanleitung

InFocus

InFocus LP70+ Leitfaden

PolyVision eno Bedienungsanleitung

Beliebte Projektorzubehör Handbücher anderer Marken