POOLEX Nano Gebrauchsanweisung

Easy start

MANUAL

for your heat pump

Model Poolex Nano

Dear Customer,

Thank you for your purchase and for your condence in our products.

These are the result of many years of research in the eld of design and production

of heat pumps for swimming pools. Our aim is to provide you with an exceptional high

performance quality product.

We have produced this manual with the utmost care so that you get maximum benet

from your Poolex heat pump.

Thank you

PLEASE READ CAREFULLY

These installation instructions are an integral part of the product.

They must be given to the installer and retained by the user.

If the manual is lost, please consult the website:

www.poolex.fr

The instructions and recommendations contained in this manual should be read carefully and understood

since they provide valuable information concerning the heat pump’s safe handling and operation. Keep this

manual in an accessible place for easy future reference.

! !

Any contractual or non-contractual liability of the manufacturer/distributor shall be deemed null and

void for

damage caused by installation or operational errors, or due to non-compliance with the instructions

provided in this manual or with current installation norms applicable to the equipment covered by

this document.

When opening the package, please check that all elements are present with your heat pump :

1 Package contents

Heat pump Poolex Nano 2 hydraulic inlet/outlet

connectors 32/38mm

diameter

This installation and user manual Electrical socket with 10

mA di󰀨erential protection

Contents

Poolex Nano can be connected with direct connection.

For an above ground pool, your Nano must be connected after your ltration pump.

3 Hydrolic connection

Once your product has been unpacked, please check the

gas value of the manometer.

Value have to be between 100 - 300 psi.

If the value is Zero, stop the installation and contact

your dealer.

2 Gas pressure

WARNING :

Your ltration pump must deliver between

1300 up to 4000 L/h

for the heat pump to operate.

Below this ow, the heat pump will display an error

code E3.

TOWARDS THE POOL

FROM THE POOL

STEP 1 : Screw the connectors

to the heat pump

STEP 2 : Connect the water

outlet pipe and the water intake

pipe

Your heat pomp is equipped with a di󰀨erential protection. It is obligatory to check its operation

beafore each use.

The heat pump should not be used if the di󰀨erential protection test fails.

Connect socket to the electrical outlet Push the button “Reset”.

The indicator lights up

Push the Button “TEST”

The indicator lights o󰀨.

Press the reset button again. The indicator

lights up.

Di󰀨erential protection is working properly.

4 Electrical connection

3 4

Once connected electrically and hydraulically, you can switch on the heat pump by pressing

Select the desired temperature with or . It will be validated automatically after a few seconds and the

screen will return to the initial display.

5 commissioning

Current temperature Current temperature

Requested temperature

To verify that compressor is running, the compressor

needle must go up, this means that the compressor works,

and that the heat pump heats up.

6 commissioning

Under normal conditions, a suitable heat pump can heat the water in a swimming pool by 1°C to 2°C per

day. It is therefore quite normal to not feel any temperature di󰀨erence in the system when the heat pump is

working.

A heated pool must be covered to avoid any loss of heat.

7 Heating time

Technical SupporT

www.poolex.fr

Issued 01-2018

Poolex is a Poolstar Group trademark

www.poolstar.fr

Andere Handbücher für Nano

Inhaltsverzeichnis

Andere POOLEX Wärmepumpe Handbücher

POOLEX

POOLEX Triline SELECTiON 150 Bedienungsanleitung

POOLEX

POOLEX Dreamline Premium FI Bedienungsanleitung

POOLEX

POOLEX 50 Bedienungsanleitung

POOLEX

POOLEX TriLine Premium 150 Bedienungsanleitung

POOLEX

POOLEX Silverline MINI Bedienungsanleitung

POOLEX

POOLEX 90 Bedienungsanleitung

POOLEX

POOLEX jetline 120 Bedienungsanleitung

POOLEX

POOLEX Nano Action Reversible Bedienungsanleitung

POOLEX

POOLEX JETLINE PREMIUM LED 70 Bedienungsanleitung

POOLEX

POOLEX JETLINE 35 Bedienungsanleitung

POOLEX

POOLEX OKU MINI Bedienungsanleitung

POOLEX

POOLEX Nano Bedienungsanleitung

Beliebte Wärmepumpe Handbücher anderer Marken

MICROWELL

MICROWELL HP 1000 GREEN Bedienungsanleitung

Sanyo

Sanyo SAP120FCH Bedienungsanleitung

Daikin

Daikin EHYHBH05AA Bedienungsanleitung

Panasonic

Panasonic WH-SDF03E3E5 Leitfaden

Bryant

Bryant 544B Bedienungsanleitung

Airxcel

Airxcel 45000 Series Handbuch

Mitsubishi Electric

Mitsubishi Electric PUZ-SWM60VAA Bedienungsanleitung

Dimplex

Dimplex LI 16I-TUR Benutzerhandbuch

Carrier

Carrier WSHP Open v3 Kurzanleitung zur Einrichtung

TGM

TGM CTV14CN018A Bedienungsanleitung

Carrier

Carrier 38MGQ Series Bedienungsanleitung

Kokido

Kokido K2O K880BX/EU Fehlerbehebungshandbuch

Viessmann

Viessmann VITOCAL 300-G PRO Type BW 2150 Kurzanleitung

Carrier

Carrier 48EZN Bedienungsanleitung

Viessmann

Viessmann KWT Vitocal 350-G Pro Series Betriebsanleitung

Ariston

Ariston NIMBUS Bedienungsanleitung

Weishaupt

Weishaupt WWP L 7 Benutzerhandbuch

GE Zoneline AZ85H09EAC Bedienungsanleitung