POS-X XTS4000 Bedienungsanleitung

TouchKit Manual for Win9X/ME v3.4.0 0

TouchKit

TouchScreen Controller

User Manual

for Windows 9X / ME

Version: 3.4.0

TouchKit Manual for Win9X/ME v3.4.0 1

CONTENT

CHAPTER 1. TOUCH PANEL CONTROLLER........................................................... 2

1.1 CONTROLLER..................................................................................................................................... 2

1.2 SPECIFICATIONS AND FEATURES........................................................................................................ 2

CHAPTER 2. INSTALLING TOUCHKIT......................................................................4

CHAPTER 3. CONFIGURATION UTILITY AND RIGHT BUTTON EMULATOR....... 8

CHAPTER 4. MONITOR ROTATION SETTING .......................................................23

4.1 ROTATING DISPLAY BY WAY OF NVIDIA OR ATI DRIVER .................................................................. 23

4.2 ROTATING DISPLAY BY WAY OF PIVOT............................................................................................. 24

CHAPTER 5. UNINSTALLING TOUCHKIT...............................................................27

TouchKit Manual for Win9X/ME v3.4.0 2

Chapter 1. Touch Panel Controller

This touch panel controller provides the optimal performance of analog resistive

touch panels for 5 wire models. It communicates with PC system directly through

RS232, PS/2 or USB connector. Users can see how superior the design is in

sensitivity, accuracy and friendly operation. The touch panel driver emulates mouse

left and right button function and supports operation systems including Microsoft

Windows 95 / 98 / ME /NT4 / 2000 / XP / XP Tablet PC Edition, Windows CE 2.12 /

3.0 / .NET, Linux, iMac and DOS.

1.1 Controller

Interface RS232 USB PS/2

5-wire Ready Ready Ready

Table 1. Controllers match with different interfaces

1.2 Specifications and Features

Specifications

Power requirements +5VDC ( Maximum 100mA, typical 70mA,

50mV peak to peak maximum ripple )

Operating temperature 0 to 50 

Storage Temperature -40 to 80 

Relative Humidity 95% at 60 

Protocol RS232 Model: 9600 bauds, None parity, 8 data bits

and 1 stop bit

USB Model: USB 1.1 Low speed

PS/2 Model: PS/2 mouse

Resolution 2048 X 2048

Report rate RS232 Model: Max. 160 points/sec

USB Model: Max. 160 points/sec

PS/2 Model: Max. 140 points/sec

Response time Resistive: Max. 35 ms

Capacitive: Max. 20 ms

Pin out definition 5 wire model: UL, UR, COM, LR, LL

Panel resistance 5 wire resistive model: 50 ~ 200 ohm

( pin to pin on drive layer )

Regulatory Approvals FCC-B, CE

TouchKit Manual for Win9X/ME v3.4.0 3

Table 2. Specifications for TouchKit controller

Features

Calibration Fast full 4 points position

Compensation Accurate 25 points linearity compensation.

Draw Test Position and linearity verification

Language Support 10 languages for Windows

Advanced Feature 1. Support monitor / display rotation

2. Support multiple monitor / display

3. Support QVGA and Half-VGA function

4. Support edge compensation

5. Support constant touch

Controller Setting 1. Support multiple controllers

2. Dynamical add / remove controllers

3. Change Controller interface without rebooting.

Mouse Emulator 1. Right / Left button emulation

2. Normal / Click on touch / Click on release mode

3. Auto right button

Sound Notification 1. Sound option (No Sound / Touch Down / Lift Up)

2. Frequency adjustment

3. Duration adjustment

Double Click 1. Configurable double click speed

2. Configurable double click area

OS support 1. Windows 95 / 98 / ME / NT4 / 2000 / XP /

Windows XP Tablet PC Edition

2. Windows CE 2.12 / 3.0 / .NET

3. Linux ( RedHat / Fedora / Mandrake /

Suse / YellowDog )

4. iMac. OS9.X / OSX

5. MS-DOS:

Support display resolution:

320x200, 640x200, 640x350, 640x480, 800x600,

1024x768 and 1280x1024

COM port support 1. Support COM 1 ~ COM 256 for Windows and

Linux

2. Support COM 1 ~ COM 8 for DOS

Table 3. Features for TouchKit software

TouchKit Manual for Win9X/ME v3.4.0 4

Chapter 2. Installing TouchKit

TouchKit is software, which contains drivers for the touch panel controllers. For the

specified communication connectors, RS232, PS/2 and USB, and the other two

utilities:

•Touch Tray support

This utility is for emulating the right and left button of mouse through the touch

panel. Users can toggle between right or left mouse buttons by this utility.

•Configuration support

The calibration and draw test of touch panel are done through this utility. Users

can add or remove new RS-232, PS/2 or USB touch panel devices.

Follow these steps to install TouchKit.

1. Put the TouchKit CD to CD-ROM.

2. Change directory to Win9X_ME

3. Double click Setup.exe, the windows installation program will then start to run.

Notice DO NOT plug in the USB controller before the installation has been

finished.

4. Click [Next >] button to continue installation.

TouchKit Manual for Win9X/ME v3.4.0 5

5. Then check the check box if PS/2 touch controller is to be installed. The default

is unchecked. Then Press [Next >] to continue installation.

System will give you a warning, if user checks the PS2AUX check box,

6. Choose the setup type that best suits your needs. There are two TouchKit

accessory utilities to choose from, Rotation Monitor Utility and Shutdown

Utility. Users can install the utility they want by checking the box. Press [Next >]

to continue installation.

TouchKit Manual for Win9X/ME v3.4.0 6

7. Select the appropriate folder where set-up files will be installed. Then Press

[Next >] to continue installation.

8. Then type in the name of program folder for TouchKit or press [Next >] to

continue. There will be a default name for it.

During driver installation, the setup program will scan COM port for RS232

Touchkit controller. Once the controller was scanned, the setup program will

display the following dialog

Click Yes to add the controller on the specified COM port automatically.

TouchKit Manual for Win9X/ME v3.4.0 7

9. Windows will copying files once that is done it will request to re-boot computer.

Press [Yes >] to re-boot immediately or [No >] to re-boot later. The installation

will not be finished until system re-boot.

10.Setup is complete. After TouchKit installation, the USB device will be found

automatically as soon as it is plugged into the computer. Then users can see the

new device on the application program window. And, the program will remove the

USB Device automatically as soon as it is unplugged. ( USB device is not

supported for Windows95 )

TouchKit Manual for Win9X/ME v3.4.0 8

Chapter 3. Configuration Utility and Right Button Emulator

There are five property pages in TouchKit utility, they are General, Setting, Edge

coefficient, Monitors and About. Each property page contains different functions

for users to make adjustments. Therefore, users can easily manage all the TouchKit

controllers through the TouchKit utility.

General

General property page contains the functions of language selection, devices add/

remove, 4 points calibration,Draw test and Advanced.

Functional Group Tab

General Function

TouchKit Manual for Win9X/ME v3.4.0 9

TouchKit supports multi-language user interface. Users could select native

language that is compatible to operation system support. For example, if the

operation system is a traditional Chinese version, users could see the normal

display words under the traditional Chinese and English mode. There are ten

different languages, English,Traditional Chinese,Simplified Chinese,French,

Spanish,German,Japanese, Italian, Korean and Dutch supported in this

feature of TouchKit.

Select the compatible language first or users may not see the normal display of

each button.

Please check the touch panel devices (including its controller) are equipped well,

then click [Add] button to add all of those RS-232 and PS/2 devices to the Panel

List dialogue box.

There is one devices found. Press [Yes] to continue.

Note to select the

compatible language first.

Andere Handbücher für XTS4000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere POS-X Software Handbücher

POS-X

POS-X XTS4000 Montageanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung