Post Genie WMS-2208R Bedienungsanleitung
Post Genie™ Web Mail Server
WMS-2208R
User Manual
2
Post Genie™
Web Mail Server
User Manual Version 1.0
©Copyright 2002-2003. All Rights Reserved.
This manual applies to 1.00 or later versions of Post Genie™ Web Mail Server
September 12, 2003
3
CUSTOMER SERVICE
To obtain service or technical support for your system, please refer to the
registration card for detailed contacts.
LIMITED WARRANTY
In no event shall IEI’s liability exceed the price paid for the product from direct,
indirect, special, incidental, or consequential software, or its documentation. IEI
offers no refunds for its products. IEI makes no warranty or representation,
expressed, implied, or statutory, with respect to its products or the contents or use
of this documentation and all accompanying software, and specifically disclaims its
quality, performance, merchantability, or fitness for any particular purpose. IEI
reserves the right to revise or update its products, software, or documentation
without obligation to notify any individual or entity.
FCC STATEMENT
IEI Post Genie™ Web Mail Server has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used according to the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
is found by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna
•Increase the separation between the equipment or device
•Connect the equipment to an outlet other than the receiver
•Consult a dealer or an experienced radio/TV technician for assistance
4
CAUTION
1. There is a danger of explosion if battery is incorrectly replaced.
2. Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer's
instruction.
3. Backup your system periodically to avoid any potential data loss.
4. Should you return any components of Post Genie™ package for refund or
maintenance, make sure they are carefully packed for shipping. Any form of
damages due to improper packaging will not be compensated.
5
Table of Contents
Chapter 1 Overview of Post Genie™.................................... 7
1.1 System Features ..............................................................................7
1.2 Package Contents ............................................................................7
1.3 System Overview .............................................................................8
Chapter 2 Installation of Post Genie™ .............................. 10
2.1 Hardware Installation....................................................................10
2.2 Network Configuration for the First-time Operation ......................14
Chapter 3 Administration of Post Genie™ ......................... 16
3.1 Accessing Administration Page......................................................16
3.2 Server Administration....................................................................19
3.3 Quick Configuration .......................................................................20
3.4 System Settings.............................................................................21
3.5 Network Settings...........................................................................23
3.6 User Management..........................................................................30
3.7 Mail System Management ..............................................................32
3.8 System Tools .................................................................................35
3.9 Statistics & Logs ............................................................................37
Chapter 4 Using Post Genie™............................................ 38
4.1 Accessing Post Genie™ ..................................................................38
4.2 Icon Description ............................................................................39
4.3 Composing Mails............................................................................40
4.4 Folders...........................................................................................41
4.5 Address Book.................................................................................42
4.6 Options ..........................................................................................43
4.7 Searching Mails..............................................................................45
Chapter 5 Using Mail Logger............................................. 47
5.1 Logging in to administration page .................................................48
5.2 Enabling Mail Logger Function .......................................................49
5.3 Searching Mails in Mail Logger.......................................................51
5.4 Searching mails via Microsoft Outlook ...........................................52
Chapter 6 Installation of Network Printer ........................ 54
6.1 Network Printer Service Configuration ..........................................54
6.2 Installation of Network Printer on User’s Computer ......................54
6
Chapter 7 Post Genie™ Maintenance................................. 59
7.1 Restart / Shutdown Post Genie™...................................................59
7.2 Reset the Administrator Password & Network Settings .................59
7.3 Disk Failure or Malfunction ............................................................60
7.4 Power Outage or Abnormal Shutdown ...........................................60
Appendix A LCD Panel ...................................................... 61
Appendix B Quick Install Wizard ...................................... 67
Appendix C Dynamic Domain Name Service Registration.. 71
Appendix D Using Advanced Firewall................................ 75
Appendix E Installing Post Genie™ via Dynamic ADSL...... 77
Appendix F Installing Post Genie™ via Static IP ADSL ...... 97
7
Chapter 1 Overview of Post Genie™
1.1 System Features
Thank you for choosing Post Genie™ Web Mail Server. Post Genie™ has the
following features:
•Easy to install
•Expandable disk volume for supporting large number of users
•Supports POP3, SMTP, IMAP and RFC mail services
•Supports mail log function
•Easy to configure and manage via Internet Explorer
•Supports network printer service
•Configurable to RAID 0, RAID 1 disk volumes (not applicable for single disk
models) and JBOD
•Large LCD panel to display system configuration and status
1.2 Package Contents
Post Genie™ Package includes:
•Post Genie™ Web Mail Server
•Power Cord
•CAT-5 Ethernet Cable
•Software Companion CD-ROM
8
1.3 System Overview
WMS-2208R
•Front View
•Rear View
LCD Panel Cancel Switch Winding Switch
Configuration
Switch
Warnin
g
s/Errors
Indicator
Power Indicator
LAN Connection
Indicators
WAN Connection
Indicator
Reset SwitchPrinter PortWAN PortLAN Ports
USB Port Coolin
g
Fans Power Supply
Connector
Power Switch
9
Network Connection Indicators
There are nine network connector indicators on the front right corner of
WMS-2208R. The indicators will show lights in green or red to indicate the
network connection speed.
Color of the Light Description
Green Current connection speed is 100 Mbps. When transferring
data, the light will blink.
Red Current connection speed is 10 Mbps. When transferring
data, the light will blink.
LCD Panel Indicators
The indicator lights on the left of the LCD panel are described as below:
Field Description
This light shines when power is on.
This light indicates a system error occurs, which needs to be
corrected.
10
Post Genie™ WMS-2208R
RJ-45 cable
ADSL Modem
Connect the cable to WAN
port and ADSL modem
Chapter 2 Installation of Post Genie™
2.1 Hardware Installation
Follow the steps below to install the hardware components of Post Genie™.
1. Connect Post Genie™ to WAN
•Connect via ADSL
Connect the WAN port to the ADSL modem via the cable included in Post
Genie™ package.
Inhaltsverzeichnis
Beliebte Server Handbücher anderer Marken
iRobo
iRobo IPC2U Bedienungsanleitung
Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung
Asus
Asus AP7500 Bedienungs- und Wartungshandbuch
Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung
HP
HP Integrity rx2600 Installationsanleitung
Milestone
Milestone Husky IVO 350T Bedienungsanleitung