Potter RA-6075R Bedienungsanleitung
MFG. #5406080 - REV B
9/11
PRINTED IN USA PAGE 1 OF 2
RA-6075R
LCD ANNUNCIATOR INSTALLATION
Potter Electric Signal Company, LLC • St. Louis, MO • Cust Service: 866-956-1211 • Tech Support: 866-240-1870 • Canada: 888-882-1833 • www.pottersignal.com
Install in accordance with installation manual, #5403594.
Description
The RA-6075R is a LCD remote annunciator for the PFC-6075R
addressable releasing re control panel. The RA-6075R communicates
using a RS-485 connection to the main panel providing common
indication of Alarms, Supervisory, Trouble and other system status and
control functions.
The RA-6075R features a 16x2 LCD display with LED’s for Power,
Alarm, Supervisory, Trouble, and Silenced conditions. It also provides
Release and Pre-Release LED’s to indicate releasing status. It can be
mounted on a single gang electrical box or a two square electrical box.
The annunciator is enclosed in a sheet metal enclosure and has a Potter
lock securing the keypad.
Figure 1: RA-6075R Class B Wiring Example Figure 2: RA-6075R Class A Wiring Example
Features
Standby Current 20 mA
Alarm Current 25 mA
Operating Temperature 0°C-49°C (32°F-120°F) 10%-93%
@ 30°C (86°F) non-condensing
humidity
Maximum Wire Length 6500 FT
Maximum Annunciators 31
Size (WxHxD) 8” x 6-1/4” x 1-5/8”
Wire Gauge 14 AWG-22 AWG
Installation
The RA-6075R is connected to the PFC-6075R using a four wire
RS-485 connection. The connection is power limited and supervised.
Up to thirty-one (31) RA-6075R LCD annunciators can be connected
using Class B or Class A wiring. Class A wiring requires an optional
CA-6075 Class A Expander.
7165-0328:0195S2930
MFG. #5406080 - REV B
9/11
PRINTED IN USA PAGE 2 OF 2
RA-6075R
LCD ANNUNCIATOR INSTALLATION
DIP SWITCH
A
B
+
-
Address Settings
The RA-6075R address is set by dip switch S1 located on the back of the RA-6075R. The address must be set in the range of 1 to 31 to be
recognized by the control panel.
Figure 3: RA-6075R Class A (back panel view)
Annunciator
Address
Dip Switch Settings
SW-1 SW-2 SW-3 SW-4 SW-5
1 On Off Off Off Off
2Off On Off Off Off
3On On Off Off Off
4Off Off On Off Off
5 On Off On Off Off
6Off On On Off Off
7On On On Off Off
8Off Off Off On Off
9 On Off Off On Off
10 Off On Off On Off
11 On On Off On Off
12 Off Off On On Off
13 On Off On On Off
14 Off On On On Off
15 On On On On Off
16 Off Off Off Off On
Annunciator
Address
Dip Switch Settings
SW-1 SW-2 SW-3 SW-4 SW-5
17 On Off Off Off On
18 Off On Off Off On
19 On On Off Off On
20 Off Off On Off On
21 On Off On Off On
22 Off On On Off On
23 On On On Off On
24 Off Off Off On On
25 On Off Off On On
26 Off On Off On On
27 On On Off On On
28 Off Off On On On
29 On Off On On On
30 Off On On On On
31 On On On On On
Dip Switch Settings
Refer to the table below for dip switch settings per Annunciator Address.
Andere Potter Sicherheitssystem Handbücher
Potter
Potter Amseco SSX-81 Bedienungsanleitung
Potter
Potter DCM-4 Bedienungsanleitung
Potter
Potter LED-16F Bedienungsanleitung
Potter
Potter VSA Bedienungsanleitung
Potter
Potter PFC-4410G3 Bedienungsanleitung
Potter
Potter PDC Series Bedienungsanleitung
Potter
Potter LED-4410G3 Bedienungsanleitung
Potter
Potter LED-16 Series Bedienungsanleitung
Potter
Potter MHT-1224 Series Bedienungsanleitung
Beliebte Sicherheitssystem Handbücher anderer Marken
EDM
EDM Solution 6+6 Wireless-AE Bedienungsanleitung
Highway Safety Group
Highway Safety Group EA401 Bedienungsanleitung
Siren
Siren LED GSM Bedienungsanleitung
Detection Systems
Detection Systems 7090i Montageanleitung
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung
Siemens
Siemens FDM273 Bedienungsanleitung