Power Dynamics 179.100 Bedienungsanleitung

WIRELESS MICROPHONE SYSTEM

179.100 / 179.102 / 179.104

Instruction Manual

Gebruiksaanwijzing

Gebrauchsanleitung

Thank you very much for purchasing this Power Dynamics wireless microphone kit. Please read

this manual thoroughly before using this equipment

Warning

-Always read the manual before using the product.

-Keep the manual so every new user can read it before using the product.

-Always keep the packaging. When a malfunction occurs, please send it in the original

packaging.

-Only for indoor use. Do not use in moistures places.

-Don’t expose to direct sunlight or heat sources.

-Don’t let small objects or fluids enter the housing. This may cause malfunction.

-Clean this unit with a dry cloth. Don’t use cleaning fluids or solvent.

-Unit contains no serviceable parts. Only the replacement parts named in this manual can

be changed by the user or servicing personnel.

-Never open the unit, service may only be done by qualified personnel.

-Never remove or place the mains plug in a socket with wet hands.

-Disconnect the unit from mains power before servicing.

-Condensation water can form while reusing, please let the unit reach the environmental

temperature before using it.

-Keep out of children’s reach.

-When the unit is damaged in a way that internal parts are visible. NEVER connect the unit

to a mains socket and NEVER switch the unit on. In this case, contact your supplier.

-When a lightning storm occurs, always disconnect this unit from the mains socket. Do the

same when the unit won’t or hasn’t be used for a long period of time.

-Using this unit might cause disturbance in insufficiently shielded equipment. This

disturbance might cause damage or accidents. Please check if there is any sensitive

equipment in close proximity of the unit before installing it.

SYSTEM COMPONENTS

Bodypack Transmitter (lavalier mic., headset mic and guitar system)

Handheld microphone

Dual channel receiver

RECEIVER FUNCTIONS/FEATURES

1. Audio level indicator: Indicates the level of the audio signal. Green LED shows normal

operation and red light shows overload of the signal.

2. Antenna Signal indicator: Appears on both sides of the display, the strength depends on

which antenna receives the strongest RF signal.

3. Channel group indication : Shows the preset group (25) - (bandwidth is 25MHz/group).

4. Channel indication: Shows the frequency data of the selected group (40 channels -channel

interval is 25kHz).

5. Battery indicator: Indicates the capacity of the battery in the transmitter.

6. Squelch: Displays SQLdata -100dBm to-50dBm (1-50).

7. SET button: Select Group / ch / SQL.

8. TRAN button: Transmits the data from point 7. to the transmitter by infrared. IR indicator

on the transmitter flashes during data transfer.

9. ▲and ▼buttons: Group / Channel / SQLdata selection.

10.Power button: Turns the receiver on / off.

11.IR / PWR Indicator: Displays IR/Power.

12.IR Sensor

13.Adaptor input connector (12-18Vdc)

14.XLR out jacks (balanced)

15.Volume control

16.6.35mm jack output (unbalanced)

17.Squelch: 2 controls channel A / B to improve signal quality and reduce noise. The system

is factory pre-set.

18.TNC antenna connectors (inputs): The connectors also provide 9Vdc to connect an

antenna amplifier.

19.19 " Rack mounting brackets. The brackets also have a hole where the antennas can be

front-mounted and be connected via extension leads (order number 179.119).

HAND-HELD TRANSMITTER FUNCTIONS/FEATURES

1. Grill : Protects the microphone cartridge and reduces wind noise.

2. IR sensor : Receives data from receiver.

3. IR indicator : Indicates waiting for data.

4. Mute indicator : Indicates mute is set.

5. Battery indicator : Green lightÆbattery is normal. Red light Æbattery must be renewed.

6. Power button

7. Battery 2x AA 1.5V alkaline

8. Battery cover

BODY-PACK TRANSMITTER FUNCTIONS/FEATURES

1. Antenna: Attach the flexible antenna to the transmitter

2. IR / Mute indicator: Green light means waiting for a code. Red light indicates mute mode. If the

indicator is off, the system is in normal operation mode.

3. Power battery indication: Red light indicates a low battery power.

4. Power On / Off button.

5. Input Connector : To suit Lavalier mic. / Headband mic. / Guitar - system.

6. IR sensor.

7. Battery cover.

8. Audio Gain to control the audio sensitivity.

SYSTEM CONNECTIONS

Receiver Power Connection

Connect the AC adaptor into the DC power connector on the back of the receiver. Plug the

adaptor into a mains outlet.

Antenna Connection

Attach the two antennas to the Antenna connectors.

Audio connection

Connect the audio cable from audio output on the receiver to the input on the amplifier micer

equipment.

TRANSMITTER CONNECTIONS

Lavalier microphone

Headset microphone

Guitar system

Battery installation

RECEIVER OPERATION INSTRUCTION

Do not turn on the transmitter before turn on the receiver.

Power up receiver

Channel set up : Press Set button, channel display will flash.

Press ▲and ▼buttons. Select a channel as required.

Group set up : Press Set button, group display will flash.

Press ▲and ▼buttons. Select a group as required.

SQL installation : Press SET button. The SQL display will flash.

Press ▲and ▼buttons. Select a SQL setting as required.

Note : For all Group/Channel/SQL settings, the receiver first processes the data and then

transfers the data to the transmitter by infrared link. Data will be retained until the receiver is

reset.

HAND-HELD TRANSMITTER OPERATION

Don’t turn on the transmitter when the receiver is off. The channel has to be set well too before.

Length press 2a3 seconds the Power button of the transmitter . The IR/MUE/Bat indicator lights,

the transmitter entering adjusting code and transfers the RF signal.

If it is needing to adjust a code (adjust channel) , enter the adjusting code mode. After +/- 20

seconds the IR green light black out exiting the adjusting code. The MUE BAT lights, indicating

entering mute. If there is no need for adjusting the code, short press (1 second) the Power button

entering normal operation.

Short press (1 second) the Power button, BAT lights only entering normal operation.

BODY-PACK TRANSMITTER OPERATION

Don’t turn on the transmitter when the receiver is off. The channel has to be set well too before.

Length press 2a3 seconds the Power button of the transmitter . The IR/MUE/Bat indicator lights,

the transmitter entering adjusting code and transfers the RF signal.

IR/MUE is green

Length press Power button

If it is needing to adjust a code (adjust channel) , enter the adjusting code mode. After +/- 20

seconds the IR green light black out exiting the adjusting code. The MUE BAT lights, indicating

entering mute. If there is no need for adjusting the code, short press (1 second) the Power button

entering normal operation.

IR/MUE is red

Short press Power button

Short press (1 second) the Power button, BAT lights only entering normal operation.

Short press Power button

ADJUSTING CODE INSTALLATION

The code can be set only once. The data of a channel is stored forever. The code must be saved

within 20 seconds after turning on the transmitter otherwise the green IR LED turns off and the

transmitter comes into mute mode. Because this system works on two different frequency bands

the code should be twice set for both Channel A and B.

Channel A

Length press (2a3 seconds) the Power button of the receiver and lenth press then the power

button of the transmitter.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Power Dynamics Mikrofonsystem Handbücher

Power Dynamics

Power Dynamics 179.150 Bedienungsanleitung

Power Dynamics

Power Dynamics PD504-Series Bedienungsanleitung

Power Dynamics

Power Dynamics PD632BP Bedienungsanleitung

Power Dynamics

Power Dynamics PD800 Bedienungsanleitung

Power Dynamics

Power Dynamics WM522 Series Bedienungsanleitung

Power Dynamics

Power Dynamics 179.126 Bedienungsanleitung

Power Dynamics

Power Dynamics 179.120 Bedienungsanleitung

Beliebte Mikrofonsystem Handbücher anderer Marken

Paso

Paso R824 Bedienungsanleitung

Naxa

Naxa NAM-982 Bedienungsanleitung

Motorola

Motorola PMNN4461 Bedienungsanleitung

Xvive

Xvive U3 Bedienungsanleitung

Tekon

Tekon DUOS Bedienungsanleitung

Heyuan Intelligence

Heyuan Intelligence IOT-G2S-01 Bedienungsanleitung

Devine

Devine WMD-IE Bedienungsanleitung

LG LF-D7150 Bedienungsanleitung

GE S768DAV Bedienungsanleitung

LD U305 HBH 2 Bedienungsanleitung

Chainway

Chainway URA8 Bedienungsanleitung

ORATOR

ORATOR D860TD Bedienungsanleitung

Sennheiser

Sennheiser Evolution Wireless Digital EW-DX EM 2 Bedienungsanleitung

Alpha Technologies

Alpha Technologies RBMS Bedienungsanleitung

SWIT Electronics Co.,LTD.

SWIT Electronics Co.,LTD. CW-S150 Bedienungsanleitung

Shure

Shure UA844 Bedienungsanleitung

Panasonic

Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Bedienungsanleitung

Pyle

Pyle PDWM5000 Bedienungsanleitung