PowerAcoustik HD-88BK Bedienungsanleitung
OWNER S MANUAL
Two Preloaded 8.8" Wide Universal
Replacement Headrest Monitors Package
HD-88BK
AUX
M
HD-88BG HD-88GR HD-88GRDK
11
DC 12V
9W
8.8 TFT-LCD
16:9 Wide
1440x234
3AV Inputs(1AV Input from front face)
Active Matrix TFT
Power Requirements
Power Consumption
Screen Size
Screen Format
Resolution Pixel
A/V Inputs
Dimensions
Carrier frequency:
LCD Panel Type
Compatible video standard
NTSC/PALAuto Select
SPECIFICATIONS
Note : This equipment has been tested and found to comply with the limits for
a ClassAdigital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
11.6(L)X8.7(W)X4.7(H)inches
ACH:914MHz B CH:915MHz
2
CAUTION 3
INSTALLATION 5
NAME AND FUNCTION OF EACH PARTS 6
Unit 6
Remote Control 7
PICTURE CONTROL 8
CONNECTIONS 9
HOW TO OPERATION THE MONITOR 10
How To Swivel The Monitor 10
How To Watch The Monitor 10
SPECIFICATIONS 11
Please read this User,s Manual in detail and use the set properly.
CONTENTS
3
CAUTION
Please read and observe all warnings and instructions in this owner s manual
and those marked on the unit. Retain this booklet for future reference.
There are two kinds of alarm symbols as follows:
WARNING
WARNING
CAUTION
The lightening flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of
dangerous voltage within the product s enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to
people.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the product.
Installation of all TV monitors
must be out of the driver s
field of sight.
Do not try and service these
products yourself, Seek only
a qualified service center or
factory service center.
Be careful not to drop or
apply under pressure to the
front panel of your video
monitor. If the screen cracks
due to misuse, your warranty
will be void!
Do not mount the product where
it will obstruct the deployment of
the airbag or in an area where it
would affect the vehicular control.
Also be careful to avoid mounting
the product where it can become
hazardous during sudden stops or
in the event of an accident.
Use extra caution with any liquids
in your car. If you or your child
Spills any liquid on these products,
pull your vehicle to the roadside
and turn the key off to disconnect
or wipe the products with a towel. Do not
operate the equipment until all liquids have
either evaporated or you have had the monitor
inspected at a service center by a qualified
technician, Severe harm or danger can
Occur.
Use only a damp cloth to clean
the screen and use only purified
water on the cloth. Wring out all
excess water prior to wiping the
screen. Do not use any cleaners
or chemicals to clean the screen.
In most cases a dry cloth will do!
P
OWER
A
V
MEN
U
,
,
10
HOW TO OPERATE THE MONITOR
POWER
How to Swivel The Monitor
You can adjust the swivel angle as shown below.
How to watch the monitor
UNIT
REMOTE CONTROLLER
1. Connect the monitor to the external devices.
2. Press the POWER button on either the remote control or the unit once to turn
the power on.
Press the same POWER button to turn the power off.
3. Turn on the external devices and view.
Make this arrow to swivel the monitor
AUX
M
CAUTION
4
Quality installations are best
performed by qualified and
certifled installers.
Don t touch the unit if there is
a flash of lightning. It may
receive an electric shock.
Do not cover heater ducts or vents.
This may cause a fire or an electric
shock.
Watching the monitor for an
extended period of time
with the engine turned off
may deplete the vehicle s
battery.
This product is designed for
operation with a 12 Volt DC,
negative ground vehicle. It
is not suitable for operation
under other conditions or
voltages.
1. The operating temperature of this product is limited to 14 F~140 F
(-10 C~60 C).
Your vehicle can reach temperatures up to 100 C in the summertime.
2. When your vehicle is extremely hot or cold you must allow time for your air
conditioner or heater to cool or heat the vehicle and for operating temperatures
to return to normal operating ranges. Your monitor will return to its normal
functions when these operating ranges are achieved.
3. Optimum picture quality is achieved when you are directly in front of the monitor
(+/-45 degrees).
4. If the buttons get stuck, please try to press the up of buttons, it will get back.
It won't impact using normal.
5. If you cann't find the files name in list when playing, please reset units or turn
off/on over again.
6. If the unit cann't be change mode when playing some special files which the
unit didn't support, please reset units or turn off/on over again.
CAUTION
Check Point
9
DVD/VCD/CD/CD-R/CD-RW/MP3
Reset
PLAY/PAUSE PREV NEXT STOP DVD REMOTE AV EJECT POWER A/V INPUT
CONNECTIONS
Video L - Audio - R Video L -Audio - R
DVD
Remote
Out
DVD Input
Video L - Audio - R
Monitor SubA/V OutputAMonitor
Headphone
BMonitor
Headphone
APower
VC-90T
AUX
M
AUX
M
RF Wireless Stereo HeadphoneRF Wireless Stereo Headphone (A CH:914MHz B CH:915MHz)(A CH:914MHz B CH:915MHz)
AV2AV1
8
PICTURE CONTROL
To adjust CONTRAST, BRIGHTNESS, COLOR press the MENU button until you
arrive at the screen for that item. Use the arrow buttons to adjust the value. Press
the MENU button to make another adjustment or leave the MENU system.
Contrast/Brightness/Color
CONTRAST
BRIGHTNESS
COLOR
50
1. Bring up the on-screen function menu by pressing the MENU button on the unit
or the remote control.
2. Press the MENU button on the unit or the remote control of monitor until you see
the item you wish to adjust.
3. Use the arrow buttons to adjust the value.
4. Press the MENU button to make another adjustment or leave the MENU system.
50
50
INSTALLATION
Product installed
AUX
M
1. Remove the existing headrest from the seat.
2.Adjust the posts of the new headrest to fit the holes in the seat where the
headrest will be installed. The post can be moved together or apart
grasp one post in each hand, move the posts in opposing directions
(like they were walking) while pushing them toward each other or away
from each other.
3. Insert the cable in the proper hole. Insert the posts into the holes in the
seat and carefully work the headrest into position. Make sure the cable
is not pinched.
4. Run the cable down the seat and out to the location of the video source
unit (such as a DVD player).
5. See the picture on the right and you can adjust
the distance between the tubes to required
space(pole width adjustments 4 ~ 8.2 .
)
AUX
M
5
How to use the Adapter tubes
Since the spacing of the mounting holes
can vary on different veicles we supply
two adapter tubes. Use these tubes when
the headrest mounting holes in your seat
are too large for the posts of the headrest
monitor.
6
NAME AND FUNCTION OF EACH PART
Unit
AUX
M
HEADPHONE JACK
Headphone output
Adjustable steel Pipe
PIPE
AUX Inputs
1 2 3456
7
8
8
8
A/V SourceAux.
7
NAME AND FUNCTION OF EACH PART
Interface Switch Function
Power Power ON/OFF
AV Signal Select
Menu Press this button for OSD menu.
And select menu option.
-
+
Increase current option value.
Decrease current option value.
POWER KEY
AV1/AV2/Aux KEY
+KEY
-KEY
MENU KEY
Remote Control
POWER MUTE SOURCE
123
456
789
0
SUB-T
ANGLE
TITLE ZOOM PROG
MENU SETUP
ENTER
GOTO SLOW
AUDIO P/N
DISPLAY A-B PBC
+
-
MENU
-
+
AV MONITOR
and
among
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere PowerAcoustik Monitor Handbücher
PowerAcoustik
PowerAcoustik PT-602MH Bedienungsanleitung
PowerAcoustik
PowerAcoustik PTM-350 Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-12 Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-101CM Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-508CL Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-642CM Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-644 Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-506HS Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-653CM Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-703HS Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-108CM Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-56ITB Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-588MSV Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-505CM Bedienungsanleitung
PowerAcoustik
PowerAcoustik PTM-600 Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-135CM Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-702CM Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-564CM Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-151CM Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-109 Bedienungsanleitung
