PowerAcoustik PTM-750 Bedienungsanleitung
POWER
meousmu
www.poweracoustik.com
7"TFT
LCD MONITOR
YOU'RE NOW READY FOR MORE FUN
ON
THE ROAD THAN EVER BEFORE
P
Please read the manual in detail before usingthis product.
k
This product is made of precision components, keep it
away
from moisture.
Thank you for your purchasing LCD monitor. Pleaseread
this manualcarefully before operatingand reserve itfor
future reference. Itwill behelpfultoyou ifyou encounter any
operational problem.
Appearance andfunction
&
MENU
Specification
Model:PTM-750
Name :7"Mirror Rearview and Navigation Monitors
Pixel:1440x234
System:PAL/NTSC
Power:DCI2V+10%
Powerconsumption:(7W
Video signal:AVI +AV2+AV3
Screensize :7 inch 16:9)
remote control:full
f
unctionremotecontrol 6m
Operating instructions
1. Please conncet the power line and video line for the unit and
power box. There is
3
video input in the power box. VI&V2
for DVD or VCD. V3 for camera lens. The system default DVD
or VCD. The camera lens engross DVD or VCD video signal when
it charges power supply. Reversely it will be displayed DVD
or VCD video signal automatically.
Automatically switch backsight:under the power on, it will be
automatically switched to camera video from DVD or VCD video
once you stop back the car.
2. It will be auto identity for the PAL system and NTSC system.
If the connection is correct it will show the picture with clearly
and colorful.
3.
To order with best result that you need, can adjust the
brightness, contrast, color, tint in the OSD or remote control.
Display Mode
AV
mode
Operatingmethod: Pressthe button "VllV2"onthe remote control to
chooseAV (AVI
,
AV2, AV3) display mode. IftheVCD or DVDsignal is
connected, there should bedisplay normally pictures signal ;Ifthe VCD
or DVDsignal isn'tconnected, AV charactershould be appeartop the
leftcornerandthe screen is blue.. the systemwill display "NO SIGNAL".
1.BRIGHTNESS
2.COLOR
3.CONTRAST
4.TINT ONLY NTSCSYSTEM
5.
SCALING
All above functions can becontrol bythe "menu"of the unitor the
remote control.
1
.Brightness: please press the manual of unitorthe remotecontrol,
then press
"
+
"
"
-
"
on the unitor
"+
"
"-
"
onthe remotecontrol
to selectyou need.
2.Color: please pressthe manual of unitorthe remotecontroltwice,
then press
"
+
"
"
-
"
on the unitor
"
+
"
"
-
"
onthe remotecontrol
to select you need.
3.Contrast: pleasepress the manualof unitor the remotecontrol
thrice, then press
"
+
"
"
-
"
onthe unit or
"
+
"
"-
"
onthe remote
controlto select you need.
4.Tint: pleasepress the manual of unitorthe remotecontrolfour
times, then press
"
+
"
"
-
"
onthe unitor
"
+
"
"
-
"
on the remote
control to select you need.
5.
Scaling: Pressthe
MENU
buttononthe display five times,then press
"
+
"
" -"
buttononthe display to choose
.
The Remote Cqntrol
1.power: switch onloff power
2.mute: pressthisbutton,the sound disappear.
3
3.VlIV2: V11V2 switch
4
4.Reverse:Turn the picturefrom left torightor uptodown.
5
S.vol+l-:Press themtoincreaseanddecrease thevolume.
6.4+1-:Press themtoincreaseanddecrease the brightness.
7.col+l-:press themtoincreaseanddecrease the color.
ocCo
7
8.
o
Pressthem the increaseanddecrease contrast.
8
9.8
Mode: pressittoselectthemode
9
(standard, brighness, Soft,
Vividness.self-defined.)
1
Insert your finger
nails
lntoAand
B
onthe
dlagram below, press
A
according
to the
dlrectlon, then pullout the battery holder
2
Removethe old battery, then insert
the new battery into the battery
holderwith the
+
side facing
upwards.
Lithium
battery
(Cr2025)
3
Fit the battery holder
back
to its place
Note:
To prevent leakageof fluid from the
lithium battery,remove the battery
when notusingthe remote control
unitfor long periodsof time (one
monthor more).Ifthe battery leaks
fluid, carefully wipe itout of the
batterycase, then change to a new
lithium battery.
SIMPLE TROUBLE-SHOOTING GUIDE
Below symptom no mean this production have been broken, Please
check beforeyou repair
!
1
Symptom
I
Probable Cause
I
Solution
I
NO
picture
Black Screen
color picture
1.No12 voltage
2.Brightnessor contrast
ratiois too small
3.no high-voltage
1.Nosources output
2.The video concentricplug
becomes loose
1.check the power isonor
connect rightly
2. checktheA/V Cable
is loose or not
3. Increasethe brightness
andcontrast ratio
1
.Checkthe output of VCD
Or
DVD
2.Replace with theAlVcable
3.Tighten theVideo input
cable
1
Video sources have
nooutput
2.Color ratioshould be
re-adjust
1
Unclear picture
I
.check the video sources
2.Enter intothe Menuto
re-adjust
With a little regular light
spots andcolor spots on
the screen or black
horizontalline inthe
picture
Itis normalsymptom inthe
active matrixdisplay
technology.
1.Poor qualityofthe
video sources
2.Bright &Contrast
itis normal symptom in
view
range
with
a
little
regularlightspotson
displayscreen.
1
.Replace with the high
qualityvideodisc
2.Reset Bright&contrast.
The outer cover of the
monitor has beendeformed
1.External temperatureis
too high
2. The Power has notbeen
switchofffor a longtime
1.The surroundtemperature
couldnotexceed to
0"
-60"
2.Turn off the powerafter
usingthe unit
Inhaltsverzeichnis
Andere PowerAcoustik Monitor Handbücher
PowerAcoustik
PowerAcoustik PT-101CM Bedienungsanleitung
PowerAcoustik
PowerAcoustik HDVD-9BK Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-602MH Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-143CMTV Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-700MHR Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-653CM Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-108CM Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-651 Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-402HRS Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-644 Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-12 Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-152CM Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-109 Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-506HS Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-567 Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-104CM Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-609MSV Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-566HS Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-702CM Bedienungsanleitung
PowerAcoustik
PowerAcoustik PT-588MSV Bedienungsanleitung
