Premier Farnell Embest SBC8140 Bedienungsanleitung

SBC8140

Single Board Computer

Quick Start Guide

Version 1.1

22nd Jan 2014

SBC8140 and its related intellectual property are owned by

Shenzhen Embest Technology Co., Ltd.

Shenzhen Embest Technology has the copyright of this document

and reserves all rights. Any part of the document should not be

modified, distributed or duplicated in any approach and form

without prior written permission issued by Embest Technology Co.,

Ltd.

Revision History:

Version

Date

Description

1.0

20/03/2013

Original Version

1.1

22/01/2014

Localisation

Table of Contents

1 Product Overview .............................................................. 1

1.1 Introduction....................................................................1

1.2 Kit Contents....................................................................1

1.3 Default Specifications.......................................................2

2 Preparations...................................................................... 3

2.1 Hardware Connections and Buttons....................................3

2.2 Setting Up HyperTerminal.................................................4

3 Linux Operating System .................................................... 8

3.1 Updating and Booting from an SD Card ..............................8

3.2 Updating and Booting from NAND Flash..............................9

4 WinCE Operating System ................................................. 11

4.1 Updating SD Card and Booting from It .............................11

4.2 Updating and Booting from NAND Flash............................13

Appendix 1: ESD Precautions & Handling Procedures......... 14

Appendix 2: Technical support & Warranty ........................ 15

2.1 Technical support service................................................15

2.2 Maintenance service clause .............................................16

2.3 Basic guidelines for protection and maintenance of LCDs ....17

2.4 Value Added Services.....................................................18

Page | 1

1Product Overview

1.1 Introduction

The SBC8140 is a Single Board Computer designed by Embest using the

MINI8510 processor card as the CPU core board. The MINI8510 is built

around the DM3730 microcontroller featuring 256MByte DDR SDRAM,

512MByte NAND Flash, RTC, LEDs, Camera interface and a 10-pin JTAG

interface on board. It is connected with the SBC8140 expansion board

through two 1.27mm space 2x45-pin dip connectors. The SBC8140

expansion board utilises many of other features of the DM3730 through

headers and connectors including serial ports, USB Host, OTG, Ethernet,

Audio In/Out, Keyboard, LCD/Touch Screen interface, VGA, SD card, etc.

The board targets those applications requiring high definition video or

large-scale data processing such as:

2D/3D game console products,

Portable media devices,

High-end industrial equipment,

Medical devices,

Intelligent home systems.

1.2 Kit Contents

SBC8140

Cross-over serial cable (DB9 to DB9)

5V/2A power adapter

DVD-ROM

Optional LCD screen (available in 4.3”480x272 or 7”800x480)

Page | 2

1.3 Default Specifications

The SBC8140 does not have an on board RTC battery by default

The SBC8140 has a Linux2.6.32 system in NAND Flash by default

The SBC8140 boots from NAND Flash by default; pressing and

holding the BOOT button (button CN12) before connecting power

can force it to boot from an SD card;

Page | 3

2Preparations

2.1 Hardware Connections and Buttons

The hardware connection points and button locations can be found in the

diagram below:

Figure 1: Hardware connections

No.

Description

No.

Description

SD card slot

BOOT button

Serial cable interface

Power adapter

interface

Page | 4

2.2 Setting up HyperTerminal

This section contains instructions for setting up HyperTerminal on a

system running Windows XP.

HyperTerminal is not included on windows Vista, 7 or 8. It can be

downloaded for these versions from

http://www.hilgraeve.com/hyperterminal/

1. Click:

Start

Programs

Accessories

Communications

HyperTerminal

On your PC’s desktop;

Figure 2: Launching HyperTerminal

Page | 5

2. Enter a name in the Name field and select an icon as below,

and then click OK;

Figure 3: Create a new HyperTerminal

3. Select the port to be used and click OK;

Figure 4: Select Port

Page | 6

4. Configure the port you selected as shown in the following

window, and then click OK;

Figure 5: Configure Port

5. HyperTerminal has been set up successfully.

Figure 6: HyperTerminal is Connected

Page | 7

Note:

HyperTerminal is not included on windows Vista, 7 or 8. It can be downloaded

for these versions from http://www.hilgraeve.com/hyperterminal/

Of course you can also use other serial communications software, just pay

attention to the properties of the serial port.

Inhaltsverzeichnis

Andere Premier Farnell Hauptplatine Handbücher

Premier Farnell

Premier Farnell Embest DevKit8600 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung