Premiertek AP2402 Bedienungsanleitung
Premiertek AP2402 150Mbps Wireless-N
Broadband Router
Quick Installation Guide
V1.0.8.11
150Mbps Wireless-N Broadband Router Quick Installation Guide
1
1. Check Your Package Contents
The following items should be found in your package:
¾150Mbps Wireless-N Broadband Router
¾Power adapter
¾Quick Installation Guide
¾CD-Rom
¾Ethernet cable
Make sure that the package contains above items. If any of the above items is missing or
damaged, please contact the store you bought this product from.
2. Before You Begin
Minimum Requirements:
¾Broadband (DSL/Cable) modem and service with Ethernet port
¾802.11n b/g/n wireless adapter or Ethernet adapter and cable for each computer
¾Internet Explorer® 5.0, Firefox® 2.0 or Safari® 1.4 or higher
150Mbps Wireless-N Broadband Router Quick Installation Guide
2
3. Hardware Installation
Figure 3-1
Attach one end of an Ethernet cable to your computer’s Ethernet port, and the other end to
one of the LAN ports of your router.
Connect another Ethernet cable from your Cable/DSL modem to the WAN port of your
router.
Connect the single DC output connector of the power adapter to the power jack on the back
of the router and plug the Power Adapter into an AC outlet.
4. LED Indicators
Figure 4-1
LED Function
150Mbps Wireless-N Broadband Router Quick Installation Guide
3
SYS Flashing
Power on
Router system running
WPS working (orange)
WAN On WAN Connection normal
Flashing Data transmitting
LAN On LAN Connection normal
Flashing Data transmitting
5. Configure Your Computer
You can manage the 150Mbps Wireless-N broadband router through the Web browser- based
configuration utility. To configure the device via Web browser, at least one properly
configured computer must be connected to the device via Ethernet or wireless network. The
router is configured with the default IP address of 192.168.1.1 and subnet mask of
255.255.255.0 and its DHCP server is enabled by default.
Here we use Windows XP for example. If your network settings are not already set and
you need to complete this step, the configurations are similar for the other operating
systems.
¾Go to Start, right click on My Network Places, select Properties, and right click on the
Local Area Connection. In the screen that appears, select Internet Protocol (TCP/IP) and
then click Properties.
150Mbps Wireless-N Broadband Router Quick Installation Guide
4
Figure 5-1
¾Select obtain an IP address automatically and obtain DNS server address
automatically, click OK
Figure 5-2
¾Back in the previous window, click OK
150Mbps Wireless-N Broadband Router Quick Installation Guide
5
6. Log In to Router Interface
¾Open a web browser (Safari, Internet Explorer, etc.) on the computer you have just
connected to the router, type http://192.168.1.1 in the address bar, and press enter
Figure 6-1
¾In the pop-up window, enter the user name guest and password guest and then click OK
Figure 6-2
¾After you have logged in, the router's user interface will be displayed. The left menu shows
the main options to configure the system, and the right screen is the summary information for
viewing and adjusting the configurations.
150Mbps Wireless-N Broadband Router Quick Installation Guide
6
7. Router Setup
7.1.Internet Connection Setting
¾Most connections utilize a dynamic IP (DHCP) and the default is already set to this. If
you have another connection type (like static IP), you will need to click on ‘Convenient
Setup’ in the menu and input information given you by your service provider and then click
save.
Figure 7-1
¾You may already be connected to the Internet. Click on ‘System Information’- ‘Internet
access info’ to see if you have an IP, Gateway, etc (refer to the following picture). If not, your
service provider probably requires you clone the MAC address of your computer to the router.
To do so, click on ‘Internet Setup’ in the menu, then click on ‘Clone MAC Address’ button to
get your computer's MAC address in according to your Internet connection type, and then
click the ‘Save’button below.
150Mbps Wireless-N Broadband Router Quick Installation Guide
7
Figure 7-2
¾If you are still not connected, or experience an erratic connection, your modem may have
the same IP as the router (192.168.1.1). You will need to change the router's IP. Click on
‘LAN Setup’- ‘LAN IP Address’ and you will see this IP in the main interface. You may edit it
to something different (192.168.2.1 for example). After entering the new IP, click on ‘Save’
below, the router will reboot, and you will need to enter the user name and password again.
Check your system status for IP again, and test connection.
Note: You will need to enter the new IPin the browser to access the user interface for any future
setting changes.
Figure 7-3
7.2.Advanced Settings
7.2.1. Restore to Factory Default
If the router ever freezes in a setting change process or if you can’t access it because you can’t
remember the IP you have given it or other problem, you may have to utilize the default button
on the back of the router to put it back to factory settings. You have to press and hole this button
for a few seconds (2-6s) with a pencil when it is working, then release and it will restore
settings to the factory configuration.
150Mbps Wireless-N Broadband Router Quick Installation Guide
8
The other way to restore factory settings is through the same user interface used in setup.
Click on ‘System management’- ‘Restore’, and click on the ‘Restore’button.
7.2.2. Password Change
You may wish to change the router's password. To do so, click on ‘System Management’-
‘Password setup’, enter a new password and then confirm it.
7.2.3. Firmware Upgrade
Click on ‘System Management’- ‘Upgrade.’ You will be able to browse to select a newer
firmware version you have downloaded and then click on the ‘Upgrade’button to proceed.
7.2.4. Wireless Security Settings
To protect your wireless network from unauthorized user access, you may wish to set up
wireless security. Click ‘Wireless Management’- ‘Security.’ Five different encryption modes -
“None”, “WEP”, “WPA-PSK”, “WPA2-PSK” and “WPA/WPA2-PSK” - are provided. WEP
authentication mode is not recommended when WPS is enabled.
¾If you want to use WEP, you can select ASCII characters (alphanumeric) or Hexadecimal
(‘A-F’, ‘a-f’ and ‘0-9’). For 64-bit WEP, input 10 Hex values (in the ‘A-F’, ‘a-f’ and ‘0-9’
range) or 5 ASCII characters. For 128-bit WEP, input 26 Hex values (in the ‘A-F’, ‘a-f’ and
‘0-9’range) or 13ASCII characters
Figure 7-4
¾If you want to use WPA/ WPA2/ WPA&WPA2 to encrypt, you can select ASCII
characters (alphanumeric format) or Hexadecimal digits (‘A-F’, ‘a-f’ and ‘0-9’). No matter
150Mbps Wireless-N Broadband Router Quick Installation Guide
9
what type you select, input 64 Hex values (in the ‘A-F’, ‘a-f’ and ‘0-9’ range) or 8-63 ASCII
characters.
Figure 7-5
¾You can use WPS (Wi-Fi Protected Setup) to secure your wireless network if the
connecting wireless device is also WPS enabled.
Figure 7-6
Method 1: Button
Push and hold WPS button on back of Router until WPS LED flashes
Push WPS button on wireless network adapter and hold for about 3-5 seconds
A safe connection will be established automatically in a moment
The reverse – pushing and holding WPS button on adapter briefly, then pushing and
holding WPS button on router briefly – may also be utilized
Method 2: PIN
Andere Handbücher für AP2402
1
Inhaltsverzeichnis
Andere Premiertek WLAN-Router Handbücher
