PRESONUS Eris E44 Bedienungsanleitung
1 Overview — 1
1.1 Introduction — 1
1.2 Summary of Eris E44/E66
Features — 2
1.3 What is in the box — 3
2 Hookup — 4
2.1 Rear Panel Connections
and Controls — 4
2.1.1 Inputs — 4
2.1.2 Power — 4
2.1.3 Acoustic Tuning
Controls — 5
2.2 Hookup Diagrams — 6
2.2.1 Basic Setup — 6
2.2.2 Advanced Setup with
Speaker Switching — 7
3 Tutorials — 8
3.1 Monitor Placement — 8
3.1.1 Badge Rotation — 9
3.2 Input Gain Setting — 10
3.3 Equalizer Setting Suggestions — 10
3.4 Acoustic Space Setting
Suggestions — 11
4 Resources — 12
4.1 Technical Specifications — 12
4.2 Troubleshooting — 14
Table of Contents
1 Overview
1.1 Introduction
Eris™ Series E5 and E8
Owner’s Manual
1
1Overview
1.1 Introduction
Thank you for purchasing the PreSonus
Eris E44/E66 studio monitors. The
E44 and E66 active monitors feature
a nested MTM (midwoofer-tweeter-
midwoofer) design that delivers
accurate response, expanded
frequency range, and the widest
stereo field available in their class.
We encourage you to contact us at
225-216-7887 (9 a.m. to 5 p.m. Central
Time) with questions or comments
regarding your PreSonus Eris E44/
E66. PreSonus Audio Electronics
is committed to constant product
improvement, and we value your suggestions highly.
We believe the best way to achieve our goal of constant
product improvement is by listening to the real experts:
our valued customers. We appreciate the support you
have shown us through the purchase of this product and
are confident that you will enjoy your Eris E44/E66!
ABOUT THIS MANUAL: We suggest that you use this manual
to familiarize yourself with the features, applications, and
correct connection procedures for your Eris E44/E66 before
connecting it to the rest of your studio gear. This will help
you avoid problems during installation and setup.
Throughout this manual you will find Power User Tips
that can quickly make you an Eris expert. In addition
to the Power User Tips, you will find several tutorials
that cover monitor placement as well as setting the
Input Level, EQ, and Acoustic Space controls.
1 Overview
1.2 Summary of Eris E44/E66 Features
Eris™ Series E5 and E8
Owner’s Manual
2
1.2 Summary of Eris E44/E66 Features
•Nested MTM design provides smooth
on- and off-axis response
•Dual 4.5/6.5”Woven composite LF Drivers produce a
more dynamic output than conventional designs
•1.25” silk dome HF Driver
•Supports Horizontal and Vertical speaker placement
•LF Amplifier Power: 50W / 80W
•HF Amplifier Power: 40W / 60W
•Balanced XLR and ¼”TRS, and Unbalanced RCA inputs
•Continuously Variable HF and MF Controls (-6 to +6dB)
•Low Cut Filter (Flat, 80Hz,100Hz)
•Acoustic Space settings (Flat, -2 dB, -4 dB)
compensates for room placement
•RF interference, Output-current Limiting, Over-
temperature, and Subsonic filter protection
•External mains fuse
•Power: 110-120V ~50/60 Hz or 220-240V ~50/60 Hz
1 Overview
1.3 What is in the box
Eris™ Series E5 and E8
Owner’s Manual
3
1.3 What is in the box
In addition to this manual, your Eris E44/
E66 package contains the following:
•(1) PreSonus Eris E44 or E66 powered studio monitor
•(1) IEC power cable
•(6) Foam feet to be placed on the bottom of
the speaker to improve isolation
2 Hookup
2.1 Rear Panel Connections and Controls
Eris™ Series E5 and E8
Owner’s Manual
4
2Hookup
2.1 Rear Panel Connections and Controls
2.1.1 Inputs
Line-level Inputs. The Eris E44/E66 provides a choice of three
inputs: two balanced (XLR and ¼”TRS) and one unbalanced
(RCA). These inputs accept a line-level signal from your audio
source and feed that signal to the monitor’s built-in power
amplifiers. These inputs are provided to allow for flexible
connectivity and not for connecting multiple sources to your
speakers simultaneously. Please connect only one source to
your Eris E44/E66.
Power User Tip: If your audio source provides balanced
XLR or ¼” TRS (tip-ring-sleeve) outputs, use one of the
corresponding balanced Eris inputs, since balanced cables
are resistant to induced noise from radio-frequency or
electromagnetic interference (RFI or EMI). If the audio source
has unbalanced ¼” TS (tip-sleeve) outputs, use a ¼”-to-RCA
adapter or adapter cable. Always use the shortest cable
possible to minimize the risk of induced RFI or EMI noise.
Input Gain: Sets the level of the input signal before it is
amplified.
2.1.2 Power
IEC Power Connection: Your Eris E44/E66 accepts a standard
IEC power cord.
Warning: Do not remove the center grounding prong or use a
ground-lift adapter, as this could result in electric shock.
RCA
Unbalanced
Balanced
INPUT
Sleeve:
Ground
Ring:
[-]
Tip:
[+]
12 3Ground
XLR TRS
[-]
[+]
INPUT
GAIN
MIN
MAX
U
2 Hookup
2.1 Rear Panel Connections and Controls
Eris™ Series E5 and E8
Owner’s Manual
5
Power Switch. This is the On/Off switch. The power status is
indicated by an LED on the front of the cabinet.
AC Select Switch. The input-power voltage is set at the
factory to correspond with the country in which it was
shipped. Use this switch only if you are using your Eris
speakers in a country that uses a different standard voltage
than is used in the country where you purchased your Eris
E44 or E66.
2.1.3 Acoustic Tuning Controls
High: Boosts or cuts all frequencies above 10 kHz
by ±6 dB.
Power User Tip: The High control on the Eris E44/E66
is a high-shelf EQ and attenuates or boosts frequencies
above 10 kHz. This EQ is much like the treble control on a
car stereo: It raises or lowers the gain on all frequencies
above the specified cutoff frequency. Shelving EQs
can make big changes to the sound very quickly by
adding or removing an entire range of frequencies.
Mid: Boosts or cuts frequencies around 1 kHz by ±6 dB.
The Mid control is a peak EQ that lets you boost
or cut a specified frequency band (in this case,
a band about two octaves wide, centered at 1
kHz). It’s capable of more subtle changes.
Low Cutoff: Rolls off the level of all frequencies below the
specified frequency (80 or 100 Hz) at a slope of -12 dB/
octave. Can be defeated by setting it to Flat, in which case,
the monitor’s natural rolloff takes over.
Acoustic Space: Cuts the level of all frequencies below 800
Hz by the specified amount (-2 or -4 dB) to compensate for
the bass boost that occurs when the monitor is placed near
a wall or corner. Can be defeated by setting it to 0 dB.
POWER
AC SELECT
-6dB
+6dB
MID
Flat
80Hz
100Hz
LOW
CUTOFF
ACOUSTIC
SPACE
-4dB
-2dB
0dB
2 Hookup
2.2 Hookup Diagrams
Eris™ Series E5 and E8
Owner’s Manual
6
2.2 Hookup Diagrams
2.2.1 Basic Setup
PC/MAC
POWER
OUT
R L
IN
E66 RCA
Unbalanced
Balanced
ACOUSTIC
SPACE
-4dB
-2dB
0dB
Flat
80Hz
100Hz
LOW
CUTOFF
100-120V~,50-60Hz,T2AL
220-240V~,50-60Hz,T1AL
160W
POWER
AC SELECT
ACOUSTICTUNING
INPUT
-6dB
+6dB
MID
HIGH
-6dB
+6dB
INPUT
GAIN
MIN
MAX
U
ACOUSTIC
SPACE
-4dB
-2dB
0dB
LOW CUTOFF
MID FREQ
HIGH FREQ
ACOUSTICSPACE
-4dB
-2dB
0dB
20 800Hz
-6dB
+6dB
0dB
10kHz
-6dB
+6dB
0dB
1kHz
0dB
-3dB
Flat 80Hz 100Hz
E66 RCA
Unbalanced
Balanced
ACOUSTIC
SPACE
-4dB
-2dB
0dB
Flat
80Hz
100Hz
LOW
CUTOFF
100-120V~,50-60Hz,T2AL
220-240V~,50-60Hz,T1AL
160W
POWER
AC SELECT
ACOUSTICTUNING
INPUT
-6dB
+6dB
MID
HIGH
-6dB
+6dB
INPUT
GAIN
MIN
MAX
U
ACOUSTIC
SPACE
-4dB
-2dB
0dB
LOW CUTOFF
MID FREQ
HIGH FREQ
ACOUSTICSPACE
-4dB
-2dB
0dB
20 800Hz
-6dB
+6dB
0dB
10kHz
-6dB
+6dB
0dB
1kHz
0dB
-3dB
Flat80Hz 100Hz
E66
AudioBox iTwo
E66
2 Hookup
2.2 Hookup Diagrams
Eris™ Series E5 and E8
Owner’s Manual
7
2.2.2 Advanced Setup with Speaker Switching
0
Sceptre S6 Eris E44
Eris E44
E44
RCA
Unbalanced
TRS
Balanced
ACOUSTIC
SPACE
Flat
80Hz
100Hz
ACOUSTIC
SPACE
LOW
CUTOFF
100-120V~,50-60Hz,T1AL
220-240V~,50-60Hz,T500mAL
100W
POWER
AC SELECT
-6dB
+6dB
0MID
HIGH
-6dB
+6dB
-4dB
-2dB
0dB
INPUT
GAIN
MIN
MAX
U
-4dB
-2dB
0dB
ACOUSTICTUNING
INPUT
E44
RCA
Unbalanced
TRS
Balanced
ACOUSTIC
SPACE
Flat
80Hz
100Hz
ACOUSTIC
SPACE
LOW
CUTOFF
100-120V~,50-60Hz,T1AL
220-240V~,50-60Hz,T500mAL
100W
POWER
AC SELECT
-6dB
+6dB
0MID
HIGH
-6dB
+6dB
-4dB
-2dB
0dB
INPUT
GAIN
MIN
MAX
U
-4dB
-2dB
0dB
ACOUSTICTUNING
INPUT
345678
OUT
IN
12V
-+
OUT IN
19-26 48kHz 11-18
15-18
96kHz
11-14
25-32 48kHz 17-24
21-24
96kHz
17-20
L
R
Main Out Mic/Line Inputs
IN
OUT
1
2
3
4
5
6
7
8
SS
Studio 192
Temblor T10
3 Tutorials
3.1 Monitor Placement
Eris™ Series E5 and E8
Owner’s Manual
8
3Tutorials
3.1 Monitor Placement
Ideally, near-field monitors should be placed
so that the tweeters are at the same height
as your ears when you are mixing.
Eris E44 and E66 speakers can be placed vertically or
horizontally; when placed vertically, they should form a
mirror-image pair, with the tweeters on the outside.
When placed horizontally, the tweeters should be on top.
Andere Handbücher für Eris E44
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere PRESONUS Sprecher Handbücher
PRESONUS
PRESONUS AIR SERIES Bedienungsanleitung
PRESONUS
PRESONUS CDL10P Bedienungsanleitung
PRESONUS
PRESONUS R65 Bedienungsanleitung
PRESONUS
PRESONUS R Series Bedienungsanleitung
PRESONUS
PRESONUS Eris E44 Bedienungsanleitung
PRESONUS
PRESONUS CDL Series Bedienungsanleitung
PRESONUS
PRESONUS ERIS SERIES E4.5 Bedienungsanleitung
PRESONUS
PRESONUS R Series Bedienungsanleitung
PRESONUS
PRESONUS ULT-series Bedienungsanleitung
PRESONUS
PRESONUS Eris E3.5 Bedienungsanleitung
PRESONUS
PRESONUS Eris Series E5 Bedienungsanleitung
PRESONUS
PRESONUS Ceres C3.5 BT Bedienungsanleitung
PRESONUS
PRESONUS Eris Series E5 Handbuch
PRESONUS
PRESONUS CDL12P Bedienungsanleitung
PRESONUS
PRESONUS R Series Bedienungsanleitung
PRESONUS
PRESONUS SL-Dante-SPK Bedienungsanleitung
PRESONUS
PRESONUS Dante CDL Series Allgemeine Anweisungen
PRESONUS
PRESONUS StudioLive 312AI Bedienungsanleitung
PRESONUS
PRESONUS Eris XT-Series Bedienungsanleitung
PRESONUS
PRESONUS Eris XT Series Bedienungsanleitung
Beliebte Sprecher Handbücher anderer Marken
Bowers & Wilkins
Bowers & Wilkins 4 Bedienungsanleitung
Sonance
Sonance SONOS OUTDOOR Series Bedienungsanleitung
Electro-Voice
Electro-Voice EVID FM4.2 Bedienungsanleitung
Pioneer
Pioneer XW-HTD630 Bedienungsanleitung
Onn
Onn BWA16AA002 Bedienungsanleitung
HP
HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung