Presys FCY-15-IS Bedienungsanleitung

FCY-15-IS

Hart

Field

Communicator

TECHNICAL MANUAL

presys

IMPORTANT INSTRUCTIONS:

•This manual contains instructions for the FCY-15-IS designed for use in hazardous areas. Read the entire

manual before using the calibrator.

•Before using the calibrator, carefully read the section “Special conditions for safe use”.

•Keep the calibrator in a dry environment whenever possible.

•In case of failure or suspected failure, especially in safe operation, send the instrument for repair to the

factory. Always send the instrument to the factory for repair.

•When not in daily use, before starting up, let the calibrator be turned on for at least one hour.

The warranty conditions are available on our website:

www.presys.com.br/warranty

EM0443-00 (09/20/2021) –Translated version of the document EM0422-00

presys

IMPORTANT INSTRUCTIONS

presys

IMPORTANT INSTRUCTIONS

presys

designed for use in hazardous areas. Read

presys

designed for use in hazardous areas. Read

Before using the calibrator, carefully read the section

presys

Before using the calibrator, carefully read the section

“Special conditions for safe use”.

presys

“Special conditions for safe use”.

Keep the calibrator in a dry environment whenever possible

presys

Keep the calibrator in a dry environment whenever possible

presys

In case of failure or suspected failure, especially in safe operation, send the instrument for repair to the

presys

In case of failure or suspected failure, especially in safe operation, send the instrument for repair to the

lways send the instrument to the

presys

lways send the instrument to the

presys

factory for repair

presys

factory for repair

When not in daily use, before starting up, let the calibrator be turned on for at least one hour.

presys

When not in daily use, before starting up, let the calibrator be turned on for at least one hour.

presys

The warranty conditions are available on our website:

presys

The warranty conditions are available on our website:

presys

www.presys.com.br/

presys

www.presys.com.br/

presys

Translated version of

presys

Translated version of

the document EM0422

presys

the document EM0422

Table Of Contents

Marking Details ............................................................................................................................................................2

Special conditions for safe use...................................................................................................................................3

1 - Introduction...............................................................................................................................................................4

1.1. General Description.............................................................................................................................................4

1.2. General Specificaions .........................................................................................................................................5

2 - Operation.................................................................................................................................................................7

2.1. Parts Identification...............................................................................................................................................7

2.2. Battery and charger...........................................................................................................................................10

2.3. Main Menu ........................................................................................................................................................12

2.4. Transmitter Power Supply .................................................................................................................................13

2.5. HART®............................................................................................................................................................... 14

2.5.1. HART®connections ....................................................................................................................................14

2.5.2. Starting HART®Communication .................................................................................................................20

2.5.3. Adjusting the HART®Transmitter Measurement Range (CH option)..........................................................21

2.5.4. Adjustment of the HART®transmitter Measurement Range with reference (CH option) ............................23

2.5.5. HART®transmitter mA output adjustment - loop test / output trim (CH option)........................................... 25

2.5.6. Full HART®Communicator (FH option) ...................................................................................................... 26

2.5.7. Configuration Files (Save / Download) .......................................................................................................33

2.6. Measure (mA) ...................................................................................................................................................38

2.7. Videos ...............................................................................................................................................................41

2.8. Settings .............................................................................................................................................................42

3 - Maintenance..........................................................................................................................................................45

3.1. Inclusion of DD Files (Device Description) ........................................................................................................45

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

Communication

presys

Communication

................................

presys

................................

presys

Transmitter Measurement Range (CH option)

presys

Transmitter Measurement Range (CH option)

2.5.4. Adjustment of the HART

presys

2.5.4. Adjustment of the HART

presys

transmitter Measurement Range with reference (CH option)

presys

transmitter Measurement Range with reference (CH option)

transmitter mA output adjustment

presys

transmitter mA output adjustment

presys

loop test / output trim (CH option)

presys

loop test / output trim (CH option)

Communicator (FH option)

presys

Communicator (FH option)

................................

presys

................................

2.5.7. Configuration Files (Save / Download)

presys

2.5.7. Configuration Files (Save / Download)

2.6. Measure (mA)

presys

2.6. Measure (mA)

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

3.1. Inclusion of DD Files (Device Description)

presys

3.1. Inclusion of DD Files (Device Description)

FCY-15-IS

Marking Details

Note: The Ex Compliance Certificate is sent with the instrument and its accessories.

presys

The Ex Compliance Certificate is sent with the instrument and its accessories.

presys

The Ex Compliance Certificate is sent with the instrument and its accessories.

Special conditions for safe use

•Use the calibrator only as described in this technical manual.

•The battery should only be charged in a safe area, using the charger provided. To avoid explosion or fire, use

only the battery (BT15-IS) and charger (CG15-IS) specified by Presys.

•Never replace the battery in a hazardous area.

•Do not use the serial communication port in an explosive atmosphere.

•The calibrator's aluminum metallic enclosure is protected by a leather case (BC15-IS) that should always house

it when in a hazardous area.

•The intrinsic safety of the instrument is only valid for the connections shown in this manual, respecting the

intrinsically safe input and output parameters.

•To avoid damage to the instrument and invalidate the Ex certification, never apply a voltage greater than 30 V

between the terminals and the metallic enclosure of the instrument.

•Never open the calibrator. Opening the enclosure may void the calibrator Ex certification.

•Do not use tools on the calibrator that may cause sparks; this practice can cause an explosion.

•Never perform maintenance on the calibrator; the components used are specified and cannot be changed.

•Never use the calibrator in an area close to explosive dust.

presys

should only be charged in a safe area, using the charger provided. To avoid explosion or fire, use

presys

should only be charged in a safe area, using the charger provided. To avoid explosion or fire, use

IS) specified by

presys

IS) specified by

Presys

presys

Presys

presys

in an explosive atmosphere.

presys

in an explosive atmosphere.

The calibrator's aluminum metallic enclosure is protected by a leather case (BC15

presys

The calibrator's aluminum metallic enclosure is protected by a leather case (BC15

The intrinsic safety of the instrument is only valid for the connections shown in this

presys

The intrinsic safety of the instrument is only valid for the connections shown in this

intrinsically safe input and output parameters.

presys

intrinsically safe input and output parameters.

To avoid damage to the instrument and invalidate the Ex certification, never apply a voltage greater than 30 V

presys

To avoid damage to the instrument and invalidate the Ex certification, never apply a voltage greater than 30 V

between the terminals and the metallic enclosure of the instrument.

presys

between the terminals and the metallic enclosure of the instrument.

r open the calibrator. Opening the enclosure may void the calibrator Ex certification.

presys

r open the calibrator. Opening the enclosure may void the calibrator Ex certification.

Do not use tools on the calibrator that may cause sparks; this practice can cause an explosion.

presys

Do not use tools on the calibrator that may cause sparks; this practice can cause an explosion.

Never perform maintenance on the calibrator; the components used are spec

presys

Never perform maintenance on the calibrator; the components used are spec

Never use the calibrator in an area close to explosive dust.

presys

Never use the calibrator in an area close to explosive dust.

1 - Introduction

1.1. General Description

The FCY-15-IS configurator allows the reading and configuration of parameters of field devices that have the

HART®protocol. It has a complete and updated DD (Device Description) configuration library registered in

FieldComm Group. It also allows the inclusion of new DD files through the USB port.

Besides HART®configurator, it has internal 15 Vdc TPS source (Transmitter Power Supply), selectable

250 Ω resistor (min.) and input for measurement of current (mAdc), allowing trim and loop test of the field instrument

with HART protocol without the need of a calibrator.

Its construction considers the use in the field, thus includes items of great value such as: bag with shoulder

straps allowing freedom for the hands, 5.7" display with led backlight facilitating visibility in low light and rechargeable

battery.

presys

configurator allows the reading and configuration of parameters of field devices that have the

presys

configurator allows the reading and configuration of parameters of field devices that have the

protocol. It has a complete and updated DD (Device Description) configuration library registered in

presys

protocol. It has a complete and updated DD (Device Description) configuration library registered in

D files through the USB port.

presys

D files through the USB port.

configurator, it has internal

presys

configurator, it has internal

presys

Vdc TPS source (Transmitter Power Supply), selectable

presys

Vdc TPS source (Transmitter Power Supply), selectable

presys

) and input for measurement of current (mAdc), allowing trim and

presys

) and input for measurement of current (mAdc), allowing trim and

HART protocol without the need of a calibrator.

presys

HART protocol without the need of a calibrator.

the use in the field, thus includes items of great value such as: bag with shoulder

presys

the use in the field, thus includes items of great value such as: bag with shoulder

straps allowing freedom for the hands, 5.7"

presys

straps allowing freedom for the hands, 5.7"

display with led backlight facilitating visibility i

presys

display with led backlight facilitating visibility i

1.2. General Specifications

Full HART®Configurator, with the latest complete DD library, registered by FieldComm Group.

Transmitter Power Supply

(TPS)

15 ± 1 V (0 to 24 mA),

with short-circuit protection (30 mA).

Internal Resistor

For mA Measurement: 100 to 120 Ω.

For mA input + HART®:250 to 280 Ω.

Safety condition (startup) / HART®only: open.

Input for current

measurement (mA)

Range from -5 to 24.5 mAdc.

Resolution of 0.0001 mA. Accuracy of ± 0.02% FS (Full Scale).

Special

software functions

Document: saves the entire configuration tree of the HART®field instrument.

Download: loads settings saved to the instrument with HART®protocol.

Quick/Calibration HART®: easy access to basic HART®commands.

Battery Rechargeable Nickel Metal Hydride with 4200 mAh and up to 8hours of continuous

use. Full charge in just 3 (three) hours.

Display 5.7’’ TFT VGA touch screen 640 x 480 pixels.

presys

Configurator, with the latest complete DD library, registered by Fiel

presys

Configurator, with the latest complete DD library, registered by Fiel

presys

Comm Group.

presys

Comm Group.

presys

protection (30 mA).

presys

protection (30 mA).

presys

For mA Measurement: 100 to 120 Ω.

presys

For mA Measurement: 100 to 120 Ω.

+ HART

presys

+ HART

presys

250 to 280 Ω.

presys

250 to 280 Ω.

Safety condition (startup) / HART

presys

Safety condition (startup) / HART

presys

only: open.

presys

only: open.

presys

Range from

presys

Range from

presys

5 to 24.5 mAdc.

presys

5 to 24.5 mAdc.

Resolution of 0.0001 mA.

presys

Resolution of 0.0001 mA.

Accuracy of ± 0.02% FS (

presys

Accuracy of ± 0.02% FS (

presys

software functions

presys

software functions

Document

presys

Document

: saves the entire configuration tree of the HART

presys

: saves the entire configuration tree of the HART

Download

presys

Download

: loads settings saved to the instrument with HART

presys

: loads settings saved to the instrument with HART

Quick/Calibration HART

presys

Quick/Calibration HART

presys

Battery

presys

Battery

Rechargeable

presys

Rechargeable

Nickel Metal Hydride

presys

Nickel Metal Hydride

use. Full charge in just 3

presys

use. Full charge in just 3

presys

Display

presys

Display

presys

’’

presys

’’

TFT VGA touch

presys

TFT VGA touch

presys

Memory 16 GB available to the user. Memory access via USB cable x micro USB.

Processor Dual Core 1 GHz, with 512 MB of RAM and 1GB of internal Flash.

Operating Environment

Temperature of 0 to 50 °C and Relative Humidity of 90% maximum (without

condensation).

5 (five) minutes warm-up.

Dimensions / Weight 137 mm x 227 mm x 73 mm (HxWxD). 2.4 kg nominal.

Included Accessories

Soft Carrying case for transport and field use.

Battery charger.

USB cable for HART®library update.

Test Leads kit.

mA input Calibration Certificate.

Technical Manual.

Notes: *FCY-15-IS is a Presys registered trademark.

*Changes can be made to the instrument by changing the specifications described in this technical manual.

*HART®is a FieldComm Group trademark.

presys

user. Memory access via USB cable x micro USB.

presys

user. Memory access via USB cable x micro USB.

presys

Dual Core 1 GHz, with 512 MB of RAM and 1GB of internal Flash.

presys

Dual Core 1 GHz, with 512 MB of RAM and 1GB of internal Flash.

presys

C and Relative Humidity of 90% maximum (without

presys

C and Relative Humidity of 90% maximum (without

presys

73 mm (HxWxD). 2.

presys

73 mm (HxWxD). 2.

presys

kg nominal.

presys

kg nominal.

presys

Soft Carrying case for transport and field

presys

Soft Carrying case for transport and field

use.

presys

use.

charger.

presys

charger.

USB cable for HART

presys

USB cable for HART

presys

library

presys

library

update.

presys

update.

Test Lead

presys

Test Lead

presys

kit.

presys

kit.

mA input Calibration

presys

mA input Calibration

Certificate.

presys

Certificate.

Technical Manual.

presys

Technical Manual.

presys

IS is a Presys registered trademark

presys

IS is a Presys registered trademark

presys

Changes can be made to the instrument by changing the specifications described in this technical manual.

presys

Changes can be made to the instrument by changing the specifications described in this technical manual.

presys

Changes can be made to the instrument by changing the specifications described in this technical manual.

is a FieldComm Group

presys

is a FieldComm Group

trademark.

presys

trademark.

2 - Operation

2.1. Parts Identification

Front Panel

Fig. 01 -Front Panel

presys

Inhaltsverzeichnis

Andere Presys Handy Handbücher

Presys

Presys FCY-15 Bedienungsanleitung

Beliebte Handy Handbücher anderer Marken

Zte

Zte BLADE A520 Bedienungsanleitung

Nokia

Nokia Lumia 620 Bedienungsanleitung

Blackbe;rry

Blackbe;rry KEYone Bedienungsanleitung

Bea-fon

Bea-fon X5 Premium Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 Series Bedienungsanleitung

Blackbe;rry

Blackbe;rry Storm Betriebsanleitung

LG LM-X420QN Bedienungsanleitung

LifeWatch

LifeWatch V Bedienungsanleitung

Bea-fon

Bea-fon SILVER LINE SL860 Bedienungsanleitung

IKI Mobile

IKI Mobile KF4.5i Bedienungsanleitung

Hitech

Hitech HT-850 Bedienungsanleitung

Yezz

Yezz Fashion F10 Bedienungsanleitung

Point Mobile

Point Mobile PM60 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Q10 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Bold 9900 Bedienungsanleitung

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung

LG LM-K420EMW Bedienungsanleitung

ISAFE MOBILE

ISAFE MOBILE IS655.2 Bedienungsanleitung