4.1.9 Reconnect all 6 flat cables and in case of SP32 also con3009 (aes/ebu). - Reconnect multi
cable running to front panel
4.1.10 Reconnect multi cable running from digital board to analogue board
4.1.11 Place the 3 screws (1x under unit, 2x on backside)
4.1.12 Go to step 1. Dissemble and assemble the video boards on page 1.
4.2 Version 2 without wires:
4.2.1 Switch the unit OFF.
4.2.2 Remove the top cover.
4.2.3 Disconnect all 6 flat cables and in case of SP32 also con3009 (aes/ebu). - Disconnect multi
cable running to front panel.
4.2.4 Disconnect multi cable running from digital board to analogue board.
4.2.5 Unscrew 3 screws (1x under unit, 2x on backside).
4.2.6 Take the Digital board out.
4.2.7 Install the new Digital HD Audio Board.
4.2.8 Reconnect all 6 flat cables and in case of SP32 also con3009 (aes/ebu). - Reconnect multi
cable running to front panel.
4.2.9 Reconnect multi cable running from digital board to analogue board.
4.2.10 Place the 3 screws (1x under unit, 2x on backside).
4.2.11 Go to step 1. Dissemble and assemble the video boards on page 1.
Primare AB • Limstengatan 7 • SE-21616 Limhamn • Sweden • Tel +46 40 6548800 •
www.primare.net
