TWINDOSE 20 Rev. 1.4 cod. 0000136325
Close JP1 for installation on warewashers with 24 Vac solenoid valves
Connect the rinse solenoid
connector (see Picture 5)
When the solenoid valve is on, both of the pumps will work at the speed that has been set.
To adjust the detergent pump speed use the trimmer
aid pump speed use the trimmer
Led 1 is green and flashing.
Led 2 is green and flashing.
When the solenoid valve is ON for more than 30 seconds, only the detergent pump will be
active. The detergent pump will dose for the set time, and will work at maximum speed.
To adjust the detergent pump dosing time use trimmer
Led 1 is green and flashing during dosing, when the dosing finishes it turns red
Connect the rinse solenoid valve to the
connector and the load solenoid valve to the
When the rinse solenoid valve is on, both pumps will work at the set speed.
To adjust the detergent pump speed use the trimmer
aid pump speed use the trimmer
Led 1 is green and flashing.
d 2 is green and flashing.
When the load solenoid valve is on, the detergent pump will dose for the set time, working at
To adjust the detergent pump dosing time use the trimmer
n and flashing during dosing, when the dosing is over it turns red.
