Prince Castle 740-T Series Bedienungsanleitung

OPERATING

INSTRUCTIONS

Pictured Model 740-T88

Model

ELECTRICAL

740-T Series 740-TJ Series

120 olts 100 olts

50-60 Hz 50/60 Hz

740-TF Series

220-240 olts

50/60 Hz

This product is warranted to be free from defects in material

and/or workmanship for a period of 1 year from date of original

installation, not to exceed 18 months from the date of

manufacture.

Any component which proves to be faulty in material and/or

workmanship will be replaced or repaired (at the option of

Prince Castle, Inc.) without cost to the customer for parts and

labor. This equipment is portable; charges for on-location

service (e.g., trip charges, mileage) are not included in the

provisions of this warranty.

This warranty is subject to the following exceptions/conditions:

• Use of any non-genuine Prince Castle parts voids this

warranty.

• All labor to be performed during regular work hours.

Overtime premium (the incremental amount) will be charged

to the customer.

• Damage caused by carelessness, neglect and/or abuse

(e.g., dropping, tampering or altering parts, equipment

damaged in shipment, by fire, flood or an act of God) is not

covered under this warranty.

• All problems due to operation at voltages other than that

specified on equipment nameplates are not covered by this

warranty. Conversion to correct voltage is the customer’s

responsibility.

• This equipment must be serviced by Prince Castle

Authorized Service Agency or a Prince Castle Service

Technician during the warranty period.

LIMITED WARRANTY

http://waterheatertimer.org/Countdown-timer-horsepower-ratings.html

INSTALLATION

1. After you have removed the timer from the carton,

inspect the unit for signs of damage. If there is

damage to the unit:

lNotify carrier within 24 hours after delivery.

lSave carton and packing materials for inspection

purposes.

lContact your local dealer or, if purchsed directly,

the Prince Castle Customer Sales Department at

1-800-722-7853 to arrange for a replacement to

be sent.

2. erify that all parts have been received. Mounting

Brackets and hardware provided.

3. To mount the timer, place mounting brackets in de-

sired location. Scribe location of mounting holes,

center punch, and drill holes. Attach timer to mount-

ing brackets placing star washer between bracket and

timer.

DISPLAYS AND INDICATORS

Shows the time for the selected channel

number.

Indicates the time value is in Hours and

Minutes.

Indicates that the time value is in

Minutes and Seconds.

Located above each channel timer

button, these lights change color

depending on the stage of the count-

down. Green = first 70% of countdown,

Yellow = next 20% countdown,

Red = last 10% of countdown.

CONTROLS

Activates countdown sequence in the

run mode.

In the program mode, it increases time

values for each channel . In the Run

Mode, it is used in conjunction with logo

button to increase the volume.

In the program mode, it decreases time

values for each channel . In the run

mode, it is used in conjunction with logo

button to decrease the volume.

Activates Program Mode and used to

adjust the alarm sound level.

PROGRAMMING

1. Press and hold the PR NCE CASTLE logo for six

seconds. The T ME displays will change from

---- to Prog and a beep will sound.

2. Press the timer channel to be programmed. The

LED indicator for the selected button will turn

yellow and a beep will sound. The current pro-

grammed time for that channel will be displayed in

the T ME display and the time value will indicate

either H:M OR M:S.

3. Press the SCAN/UP Arrow or the SCAN/DOWN

Arrow button to change the program time for the

selected channel.

Channel

(Button)

SCAN/UP

ARROW

SCAN/DOWN

ARROW

PR NCE

CASTLE

Logo

T ME

Display

H:M

M:S

LED

ndicators

Prog

3:00

IMPORTANT: To change from Minutes and Seconds

M:S to Hours and Minutes H:M. Press and hold the

SCAN/UP Button. When the display reaches 59:59 it

will automatically change to 1:00 Hour and the LED will

switch from M:S to H:M. The program value for the

H:M indicator is from 1:00 hour to 17 hours: 59 min-

utes.

4. Press the desired channel button to program

another channel. Repeat programming procedures

in steps 2 and 3 above.

5. When finished programming each desired channel,

momentarily press the PR NCE CASTLE logo to

end the Program Mode. This saves the program

changes you have made for all channels.

6. You can change the sound level of the alarm in

RUN MODE. Press and hold the PR NCE CASTLE

logo; then, within six seconds, press either the

SCAN UP Arrow button or the SCAN DOWN Arrow

button. The SCAN UP Arrow button adjusts the

sound level to the louder alarm, the SCAN DOWN

Arrow button adjusts the sound level to the lower

alarm.

OPERATION

1. Press a channel button to activate a timing cycle.

(All channels can be activated and running at the

same time.) The time remaining will countdown in

the T ME display, and the time value M:S or H:M will

be illuminated.

59:59

1:00

2:59

2. Press the desired channel button three times within

five seconds to cancel an active timing cycle.

IMPORTANT: The channel timer buttons multicolored

LED indicator shows the status of the timer. The

indicator has three colors: green, yellow, and red. The

LED will be green during the first 70% of the count-

down. It changes to yellow during the next 20% of the

countdown. It will be red during the final 10% of the

countdown, and will start flashing red once the time

has run out.

3. The timer will countdown from the programmed

value to zero. At zero, the display flashes End and

the alarm sounds.

4. When the timing cycle is complete, and the alarm

sounds, press the channel button to cancel the

alarm.

CLEANING

1. Do not allow grease to build up on the timer, wipe it

down daily with clean damp cloth.

End

PART LIST

ITEM PART NUMBER DESCRIPTION

1 69-079S Plastic Rivet (Pkg. Of 2)

2 740-030 Rear Cover ( 88)

740-034 Rear Cover ( 44 & 66)

3 740-067S Main P.C. Board ( 44)

740-065S Main P.C. Board ( 66 & 88)

4 740-077S Wing Board ( 88 Only)

5 88-653-2-4S Speaker Assy.

6 541-135 Speaker Shim

7 740-026S Switch Panel Assy. ( 88)

740-027S Switch Panel Assy. ( 66)

740-028S Switch Panel Assy. ( 44)

740-089S Switch Panel Assy. ( 66MC)

8 740-032 Front Cover ( 88)

740-036 Front Cover ( 66 & 44)

9 70-048S Knob W/Hardware

10 72-292S Power Supply (110 Volt)

72-293-04FS Power Supply (220-240V)

72-293-01JS Power Supply (100 Volt)

IMPORTANT: Do not use abrasive or chemical cleaners

on your timer, this may cause damage to the

overlay.

EXPLODED VIEW

TROUBLESHOOTING GUIDE

A. No displays or indicators lit. Unit unplugged. Plug unit in.

Store's circuit breaker blown. Reset breaker.

Defective transformer. Replace Main Circuit Board.

Circuit inoperable. Replace Main Circuit Board.

B. Absence of Audio Alarm. Speaker inoperable. Replace Speaker.

Circuit inoperable. Replace Main Circuit Board.

C. Unit will not enter program All channels are still counting. Wait until channels are in stop

mode. Display does mode.

not show "Prog". Logo Switch inoperable. Replace Switch Panel.

D. Unit enters program mode. The channel is still counting. Wait until channel is in stop mode.

Display shows "Prog", but Arrow Switch inoperable. Replace Switch Panel.

cannot change times. Circuit inoperable. Replace Main Circuit Board.

E. Unable to start, stop, or store Circuit inoperable. Replace Switch Panel. If

timer presets in program mode. problem persists, replace Main

Missing or abnormal characters Circuit Board.

in displays.

CAUSE SOLUTION

PROBLEM

WIRING DIAGRAM 74 -T44,T66 &T88

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Prince Castle Timer Handbücher

Prince Castle

Prince Castle 840-T16D Bedienungsanleitung

Prince Castle

Prince Castle 755 Series Single-Display Timers 755-HS10 Bedienungsanleitung

Prince Castle

Prince Castle 755 Series Bedienungsanleitung

Prince Castle

Prince Castle Merlin II 740-T Series Bedienungsanleitung

Prince Castle

Prince Castle 755-HM8 Bedienungsanleitung

Prince Castle

Prince Castle 740-T12 Bedienungsanleitung

Prince Castle

Prince Castle 755-HM10 Bedienungsanleitung

Prince Castle

Prince Castle 740-TCE Series Bedienungsanleitung

Prince Castle

Prince Castle 740-T44 Bedienungsanleitung

Prince Castle

Prince Castle 840-T series Bedienungsanleitung

Prince Castle

Prince Castle 840-T4 Bedienungsanleitung

Prince Castle

Prince Castle Merlin II 840-TCE Series Bedienungsanleitung

Prince Castle

Prince Castle 755-HM10 Bedienungsanleitung

Prince Castle

Prince Castle Merlin II Bedienungsanleitung

Prince Castle

Prince Castle 740-T44 Bedienungsanleitung

Prince Castle

Prince Castle 755-HM8 Bedienungsanleitung

Prince Castle

Prince Castle 741-T2HW Series Bedienungsanleitung

Beliebte Timer Handbücher anderer Marken

Intermatic

Intermatic P1131 Bedienungsanleitung

Learning Resources

Learning Resources Time Tracker mini Bedienungsanleitung

CEBEK

CEBEK I-215 Bedienungsanleitung

Somogyi

Somogyi home TS MD 5 Bedienungsanleitung

Profile

Profile 010200280 Bedienungsanleitung

Gizmo

Gizmo T4 Bedienungsanleitung

Tekmar

Tekmar Timer 031 Bedienungsanleitung

Daikin

Daikin DST301B61 Bedienungsanleitung

sisel

sisel ENDA ETM2432 Bedienungsanleitung

B&Q

B&Q TE103 Bedienungs- und Wartungshandbuch

Hozelock

Hozelock AC Plus 2700 Bedienungsanleitung

GIC

GIC Eliro V7DDSS3Eliro V7DFTS3 Bedienungsanleitung

Tork

Tork TU40 Bedienungsanleitung

Emos

Emos EMT400F Bedienungsanleitung

FarmTek

FarmTek Polaris Bedienungsanleitung

Maximum

Maximum CRONUS Bedienungsanleitung

Uberhaus

Uberhaus TD133B Bedienungsanleitung

Clas Ohlson

Clas Ohlson 31-3766 Bedienungsanleitung