PrintDreams PrintBrush XDR Betriebsanleitung

Operating and Maintenance Manual

PrintBrush XDR

Mobile Printer

Table of contents

1INTRODUCTION................................................................................................................................... 6

1.1 PREFACE .............................................................................................................................................................6

1.2 IDENTIFICATION ...................................................................................................................................................6

1.3 LEGAL DETAILS .....................................................................................................................................................6

1.4 LIABILITY.............................................................................................................................................................7

1.5 INTENDED USE .....................................................................................................................................................7

1.6 TARGET GROUPS AND PREVIOUS KNOWLEDGE ...........................................................................................................8

1.7 THE CONTENT AND PURPOSE OF THIS DOCUMENTATION..............................................................................................8

1.8 PRINCIPLE ...........................................................................................................................................................8

2SAFETY................................................................................................................................................ 9

2.1 SIGNAL WORDS USED IN SAFETY NOTICES..................................................................................................................9

2.2 SYMBOLS USED IN SAFETY NOTICES ........................................................................................................................10

2.3 RESIDUAL HAZARDS ............................................................................................................................................11

2.4 GENERAL SAFETY INSTRUCTIONS AND PROVISIONS....................................................................................................14

2.5 SAFETY NOTICE PANELS ON THE PRODUCT...............................................................................................................14

3DESCRIPTION .....................................................................................................................................15

3.1 SCOPE OF SUPPLY ...............................................................................................................................................15

3.2 LAYOUT ............................................................................................................................................................16

3.3 COMPONENTS ...................................................................................................................................................17

3.4 TECHNICAL SPECIFICATIONS AND DIMENSIONS.........................................................................................................19

3.5 OPERATING SYSTEMS ..........................................................................................................................................20

4INITIAL OPERATION............................................................................................................................20

4.1 TRANSPORT AND UNPACKING ...............................................................................................................................20

4.2 ASSEMBLY AND SWITCHING ON.............................................................................................................................22

4.3 SOFTWARE........................................................................................................................................................28

4.4 WIFI CONNECTION.............................................................................................................................................28

5OPERATION........................................................................................................................................29

5.1 IMAGE TRANSFER ...............................................................................................................................................30

5.2 PRINTING........................................................................................................FEL!BOKMÄRKET ÄR INTE DEFINIERAT.

5.3 LIGHT GUIDE AND SYMBOLS .................................................................................................................................35

5.4 AUTOMATIC CLEANING CYCLE ...............................................................................................................................39

5.5 MANUAL CLEANING CYCLE ...................................................................................................................................40

5.6 SOFTWARE........................................................................................................................................................41

5.7 WIFI CONNECTION.............................................................................................................................................41

5.8 USB CABLE CONNECTION.....................................................................................................................................42

5.9 STORAGE ..........................................................................................................................................................43

6MAINTENANCE...................................................................................................................................44

6.1 CHARGING THE BATTERY......................................................................................................................................44

6.2 CHANGING THE INK CARTRIDGE.............................................................................................................................47

6.3 CLEANING .........................................................................................................................................................52

6.4 TROUBLESHOOTING ............................................................................................................................................53

6.5 RESET...............................................................................................................................................................56

6.6 REPAIRS &RETURN ............................................................................................................................................56

6.7 SPARE AND WEAR PARTS......................................................................................................................................57

7DISCONTINUED USE AND DISPOSAL....................................................................................................59

8APPENDIX ..........................................................................................................................................60

Index of illustrations

Fig. 1: Safety instructions on the underside of the PrintBrush XDR........................................................15

Fig. 2: Package content .........................................................................................................................16

Fig. 3: PrintBrush XDR parts..................................................................................................................16

Fig. 4: Printing device assembly.............................................................................................................17

Fig.5: Docking station assembly.............................................................................................................18

Fig.6: Reference imprint 14 x 100 mm ...................................................................................................19

Fig.7: Packaging....................................................................................................................................21

Fig. 8: Opening and removing the cover ................................................................................................22

Fig. 9: Battery ........................................................................................................................................22

Fig. 10: Opening the battery compartment.............................................................................................23

Fig. 11: Battery contact insulating tab ....................................................................................................23

Fig. 12: Opening the sliding panel..........................................................................................................24

Fig. 13: Sliding panel open.....................................................................................................................24

Fig. 14: Ink cartridge..............................................................................................................................25

Fig. 15: Insert ink cartridge.....................................................................................................................25

Fig. 16: Insert battery.............................................................................................................................26

Fig. 17: Example test imprint with SSID and password ..........................................................................26

Fig. 18: Example test imprint with SSID and password ..........................................................................28

Fig. 19: On/off switch.............................................................................................................................31

Fig. 20: remove the PrintBrush XDR from the docking station................................................................31

Fig. 21: Printing from left to right............................................................................................................32

Fig. 22: Printing from right to left............................................................................................................32

Fig. 23: Lightpipe changed from green to yellow (indicating one of the stored imprints as active position)

........................................................................................................................................................33

Fig. 24: Multi-line imprint procedure.......................................................................................................33

Fig. 25: Place into docking station..........................................................................................................34

Fig. 26: Light Guide................................................................................................................................35

Fig. 27: Light Guide directions................................................................................................................35

Fig. 28: Color sample released by spitting .............................................................................................39

Fig. 29: Do not direct towards eyes, face or skin. Light irritation possible...............................................39

Fig. 30: Slide print head wiper out..........................................................................................................40

Fig.31: Clean print head with the wiper..................................................................................................41

Fig. 38: Example test imprint found on the Quick Setup Guide with SSID and password.......................41

Fig. 39: Example images of WIFI connection connecting (left) and connected (right).............................42

Fig. 40: USB connection ........................................................................................................................42

Fig. 41: Power plug................................................................................................................................44

Fig. 42: Charge battery ..........................................................................................................................45

Fig. 43: Open and remove cover............................................................................................................47

Fig. 44: Battery ......................................................................................................................................47

Fig. 45: Open battery compartment........................................................................................................47

Fig. 46: Opening the sliding panel..........................................................................................................48

Fig. 47: Sliding panel open.....................................................................................................................48

Fig. 48: Pull out ink cartridge..................................................................................................................49

Fig. 49: Ink cartridge..............................................................................................................................49

Fig. 53: Insert ink cartridge.....................................................................................................................50

Fig. 54: Insert battery.............................................................................................................................50

Fig. 55: Cover closed.............................................................................................................................51

Fig. 56: Opening for device research .....................................................................................................56

Fig. 57: Cover the contacts of the battery...............................................................................................56

Versions

Version

Date

Description

0.1

2018.06.15

Draft version by docu solutions

1.0

2018.08.09

Revised version

1.1

2019.03.25

Final version

This original documentation has copyright protection. All rights, in particular the right to reproduction and

dissemination as well as translation are reserved. No part of these instructions may be reproduced or

utilized in any form by any means, electronic or mechanical (including photocopying, microfilm, or any

other process) or be saved, processed, duplicated or distributed using any electronic system, without

written permission from COLOP Digital GmbH. Contraventions can entail prosecution under criminal law.

Operating and Maintenance Manual

PrintBrush XDR mobile printer

CODI Standard 1.0 Page 6of 60

1 INTRODUCTION

With the PrintBrush XDR printing device (PrintBrush XDR) you have a product that is exemplary in terms

of safety for users and leading edge in terms of technology. Despite this, PrintBrush XDR may be

hazardous if used incorrectly or as not intended. We refer to potential hazards in Section 2 ‘Safety’ and

with safety notices throughout the entire documentation.

1.1 Preface

This original documentation is intended to assure safety-aware work on and with the product. It contains

safety notices that must be followed! All those working with the PrintBrush XDR must have access to this

documentation and must observe the relevant specifications and instructions. The documentation must

always be completely and easily legible.

COLOP Digital GmbH is not liable for technical or printing-related defects in this documentation, nor will it

accept any liability for damage caused directly or indirectly by the delivery, performance or usage of this

documentation.

1.2 Identification

The product is clearly identified on the packaging.

CE mark in acc. with Directive 2014/35/EU (Low-Voltage Directive)

1.3 Legal details

COLOP Digital GmbH

Dr.-Arming-Straße 5

A-4600 Wels

Austria

Phone: +43 (0) 7242 661 04

Fax: +43 (0) 7242 466 64

E-Mail: info@printbrush.com

Homepage: https://www.printbrush.com/

Operating and Maintenance Manual

PrintBrush XDR mobile printer

CODI Standard 1.0 Page 7of 60

1.4 Liability

The details in this documentation describe the properties of the product without assuring those properties.

No liability is accepted for damages that arise from:

•unintended use of the product.

•failure to follow the documentation.

•improper work on and with the product.

•operating the product while in a defective condition.

•defective monitoring of parts of the product that are subject to wear.

•improperly conducted repair work.

•unauthorized modification of the product.

•natural disasters, the action of foreign bodies and force majeure.

1.5 Intended use

The PrintDreams PrintBrush XDR, hereafter referred to as PrintBrush XDR, is a battery-operated mobile

printing device. The device can be operated by smart phone, tablet or computer. It can make imprints

directly on a variety of absorbent surfaces including paper or cardboard. The PrintBrush XDR is suitable

for making individual imprints and for occasional multiple use.

The multicolor ink cartridge (CMY) uses inkjet technology. Surface navigation and/or speed control is

managed by an optical sensor. The printing content is sent to the device directlyfrom an application (APP)

or computer software (SW). Transfer is via a WIFI connectionfrom a smart phone ortablet or USB interface

on a computer. Printing begins automatically if the PrintBrush XDR is in print mode and the device is

moved over the printing background by hand. If rotation or height of the device above the surface exceeds

a maximum range, printing is interrupted, and navigation continues. When returned to the normal range,

printing restarts.

The PrintBrush XDR must be returned to the docking station after each use. Several imprints can also be

saved on the device so that it can be used without the APP or software (offline mode). The rechargeable

battery (supplied) is recharged using the charger (supplied). Only use original batteries and original

replacement ink cartridges.

After extended periods between uses, the ink cartridge must undergo a cleaning cycle. The PrintBrush

XDR should be used at least once a month.

Operating and Maintenance Manual

PrintBrush XDR mobile printer

CODI Standard 1.0 Page 8of 60

1.6 Target groups and previous knowledge

Users of the PrintBrush XDR are non-professionals, aware of the hazards associated with using thedevice

via the safety pictograms on the PrintBrush XDR and instructions in the Short Operating Manual and in

this Operating and Maintenance Manual. Users can recharge the PrintBrush XDR with the charger

(supplied) and change ink cartridges. Users are not authorized to carry out repairs on the product.

Inspection and maintenance and/or repairs should only be carried out by qualified personnel.

1.7 The content and purpose of this documentation

Users can download this original Operating and Maintenance Manual at www.printbrush.com for

information.

This documentation contains the relevant information for PrintBrush XDR assembly, commissioning,

operation, maintenance and disposal. This documentation is intended to ensure hazard-free work with the

PrintBrush XDR.

Compliance with the instructions contained within this document enables hazard-free working and avoids

damaging the PrintBrush XDR.

Limits of use

The limits of use for the PrintBrush XDR are defined as follows:

•The device is intended for use in enclosed, clean and dry areas (offices, warehouses, private

residences).

•Horizontal or Vertical place of use on level, firm ground.

•Ambient temperature: +15 °C to +35 °C

•Humidity range 5 % to 100 % (storage 5 % to 80 %)

•The PrintBrush XDR is a printing device using images, graphics and text sent via a software

application.

•It can print directly onto a variety of absorbent surfaces including standard paper, cardboard, fabric,

wood, cork, dry wall, high-gloss paper, photo paper and other surfaces with special coatings.

•The PrintBrush XDR is fitted with an LED light strip.

•The PrintBrush XDR rechargeable battery is recharged using the power plug.

1.8 Principle

This product incorporates state-of-the-art technology and complies with applicable health and safety

regulations. Nonetheless, the following hazards can arise as a result of incorrect transport, improper use,

failure to observe the safety instructions contained in this Operating and Maintenance Manual or in the

event of misuse:

•fatal or serious injury to users or third parties

•damage to the product and other items of capital equipment

•impairment to the efficient operation of the product

Operating and Maintenance Manual

PrintBrush XDR mobile printer

CODI Standard 1.0 Page 9of 60

2 SAFETY

This documentation is structured in accordance with valid EU directives and contains safety notices. The

user of the PrintBrush XDR is responsible for complying with safety-related information in this

documentation.

This Section contains a general description of the warning and safety instructions, and important safety

notices.

2.1 Signal words used in safety notices

DANGER!

A safety notice with the signal word DANGER points to an immediately

threatening hazard to the life and limb of people.

This signal word denotesa hazard with a high level of risk which, if not avoided,

can result in death or serious injury.

WARNING!

A safety notice with the signal word WARNING denotes a dangerous

situation that could cause personal injury (of a serious nature) and may also

cause damage to items of capital equipment.

This signal word denotes a hazard with a moderate level of risk which, if not

avoided, can result in death or serious injury.

CAUTION!

A safety notice with the signal word CAUTION denotes a potentially

hazardous situation that can result in slight injuries or damage to items of

capital equipment.

This signal word denotes a hazard with a low level of risk which, if not avoided,

can result in minor or moderate injury.

NOTICE

A safety notice with the signal word NOTICE denotes a situation that could

result in damage to items of capital equipment!

This signal word denotes a hazard which, if not avoided, can result in damage

to items of capital equipment or damage to the device.

Operating and Maintenance Manual

PrintBrush XDR mobile printer

CODI Standard 1.0 Page 10 of 60

2.2 Symbols used in safety notices

General warning symbol, this danger symbol warns of risks of injury. Follow

all measures designated with this danger symbol to prevent serious or fatal

injuries!

This safety notice draws attention to the possible hazards of electrical

voltage.

This safety notice draws attention to the possible hazards of hot surfaces!

Reference to the obligation to read the Operating Manual!

Danger symbol for environmentally hazardous substances

Notice relating to additional information and/or to cross references!

Inhaltsverzeichnis

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung