Prior Scientific ProScan III Bedienungsanleitung

ProScan® III Manual

Visit Prior on the web at

ProScan®III

Universal Microscope Automation Controller

Manual Version 1.12

Prior Scientific,

Ltd

Prior Scientific, Inc Prior Scientific, GmbH Prior Scientific KK

Cambridge, UK Rockland, MA. USA Jena, Germany Tokyo, Japan

T. +44 (0) 1223 881711 T. +1 781-878-8442 T. +49 (0) 3641 675 650 T. +81-3-5652-8831

E. uksales@prior

.com

E. [email protected] E. [email protected] E. inf[email protected]

Visit Prior on the web at

Worldwide distribution

ProScan® III Manual

Contents

SECTION 1 IMPORTANT SAFETY INFORMATION 3

SECTION 2 IDENTIFYING AND CONNECTING YOUR SYSTEM 6

2.1 Identifying the parts of the ProScan III controller 6

2.2 Connections 7

2.3 Installing accessories and indicators 8

2.31 Installing stages 8

2.32 Installing focus 9

2.33 Installing filter wheels and shutters 11

2.34 Fourth Axis or Auxiliary Axis equipment 12

2.35 Connecting the Interactive Control Centre 12

2.36 Installing a Lumen 200Pro 12

2.4 Expanding the ProScan III 13

SECTION 3 INSTALLING AND USING THE SOFTWARE 18

3.1 Installing software 18

3.2 Using the program 19

SECTION 4 SOFTWARE COMMANDS 41

4.1 ASCII Commands for RS232 or Virtual COM port 41

4.2 General Commands 44

4.3 Stage Commands 47

4.4 Z Axis Commands 51

4.5 Filter Wheel Commands 53

4.6 Shutter Commands 54

4.7 Lumen Pro Commands 55

4.8 Pattern Commands 56

4.9 Stage Mapping Commands 58

4.10 OEM Commands 59

4.11 Error Codes and Error Tracking Commands 60

4.12 CS152 (Joystick Backwards Compatibility) 61

4.13 Examples for the CS152 Joystick buttons 63

4.14 Add on trigger board commands 64

4.15 Encoders 65

4.16 TTL input/output symbols 68

4.17 TTL Command Set 69

4.18 TTL Programming Advanced Features 70

ProScan® III Manual

SECTION 5 GLOSSARY 73

SECTION 6 RETURNS AND REPAIRS 76

APPENDICES 77

Appendix A: How to use Prior Terminal 77

Appendix B: Principles of Operation ` 80

Appendix C: VLD Connections 86

Appendix D: V31F Connections 87

Appendix E: FTDI speed adjustments 88

Appendix F: Fourth Axis Commands 89

Appendix G: Product Compatibility with the ProScan III 90

Appendix H: Information for customers in China 91

Appendix I: ProScan III FTDI USB Field Issues and Solution 92

Thank you for purchasing a ProScan III system –we hope and expect that it will be a

reliable and useful part of your microscopy set up. Please take the time to thoroughly read

this manual before installing and using the ProScan III as it contains both important safety

information and how to use the device effectively. Do not hesitate to contact Prior

Scientific if you have any questions or comments.

ProScan® III Manual

IMPORTANT INFORMATION

SECTION 1

1.1 Important safety information

Save this manual as it contains important safety information and operating instructions.

Use only as specified by these operating instructions or the intrinsic protection

provided by the unit may be impaired.

Before using the stage system, please follow and adhere to all warnings, safety and

operating instructions located on the product and in this user manual.

It is safe for use in an ambient temperature from 5 to 40°C with relative humidity to

80% up to 31°C decreasing linearly to 50% RH at 40°C.

Do not expose the product to water or moisture while switched on.

Do not expose the product to extreme hot or cold temperatures.

Do not expose the product to open flames.

Do not allow objects to fall on or liquids to spill on the product.

Connect the AC power cord only to designated power sources as marked on the

product.

Make sure the electrical cord is located so that it will not be subject to damage.

Make sure the system in installed so that the front panel power switch is easily

accessible.

For use in a manner not specified in this manual contact Prior before any work is done.

To reduce the risk of damage, unplug the product from the power source before

connecting the components together.

ProScan® III Manual

DANGER –Never alter the AC cord or plug. The power cord set must be

an appropriately rated and approved cord set in accordance in the

regulations of the country it is used in. If the supplied plug adapter is not

the correct fitting for your geographic area or if you are unsure about the

relevant regulations, please contact your supplier for advice

The ProScan III is class 1 and must be only connected to a power outlet which

provides a protective earth (ground).

Do not attempt to disassemble the product. Doing so will void the warranty. This

product does not contain consumer serviceable components. Servicing should only be

performed by Prior or a Prior approved agent.

Only the exterior of this product should be cleaned using a damp lint-free cloth.

This warning symbol indicates that there is a high voltage danger.

This warning symbol indicates that there is a strong magnetic field

This sign indicates that there is a risk of damage or injury if instructions

are not followed correctly.

In accordance with The Waste Electrical and

Electronic Equipment Regulations, this symbol

indicates that the product must not be disposed of

as unsorted municipal waste but should be

collected separately.

Refer to your local authority in the EU for return

and/or collection systems available in your country.

ProScan® III Manual

1.2 What does this manual cover?

FOR A FULL LIST OF PRODUCTS COVERED BY THIS MANUAL PLEASE SEE

APPENDIX G.

This manual covers all varieties of the ProScan III controller produced by Prior Scientific.

It also covers the control, via the ProScan III, of any Prior product which is compatible

with the ProScan III, including the control joystick, filters, shutters, focus motors, the ProZ

stand, the Brightfield LED, the linear stage, the Z-Deck and the stepper motor stage, will

be covered by this manual.

Note that in some cases, these products may also have their own installation

manuals, installation guides, or quick start guides. In that case, all relevant

literature should be read and understood before use.

ProScan® III Manual

IDENTIFYING AND CONNECTING YOUR SYSTEM

SECTION 2

2.1 Identifying the parts of the ProScan III controller

The ProScan III is a control system designed to control Prior products, including stages,

focus motors, shutters, filter wheels and illumination. The modular design of the ProScan

III controller allows the functionality of the system to be altered to match your

requirements. The same modular approach allows an easy upgrade path should additional

functionality be required.

The controller consists of:

1 controller box.

1 RS232 Cable.

1 USB cable.

1 Power cable, supplied suitable for your geographical area.

Quick Start Guide for your specific controller.

Contact Prior Scientific immediately if any parts are making.

It is likely that you will also receive a PS3J100 Interactive Control Centre (sometimes

called the ‘joystick’) allowing control of the system. The operation of this device is not

covered in this manual so please consult the PS3J100 Interactive Control Centre manual

for advice and support.

The controller box will be one of two variants, either the vertical stacking (left) option or

the horizontal stacking (right) option. For the purposes of this manual we will use the

vertical version in pictures and instructions below; however the instructions apply equally

to the horizontal version. The large, square box is the main ProScan III unit, whilst the

smaller box is an ancillary box for added functionality.

ProScan® III Manual

2.2 Connections and Indicators

The rear of the box has the connections to integrate the control box with power supplies,

accessories and a controlling computer. All connections on the box are labelled on the

box itself.

The controller front face has 3 LEDs.

1. POWER: Green illuminated: Power On

2. TX/RX: Two Colour LED communications

a. RX (Receive) Amber illuminated

b. TX (Transmit) Green illuminated

3. STATUS: Red illuminated: Fault in system.

Contact Prior Scientific.

ProScan® III Manual

2.3 Installing accessories.

ENSURE THAT THE POWER IS OFF BEFORE DECONNECTING OR

CONNECTING ANYTHING TO THE CONTROL BOX.

All connectors on the rear of the box are labelled. See the included ‘Quick Start Guide’

(also available on the Prior UK website) for further details regarding connections. In the

Appendices you will find connection diagrams for the V31F and the linear stage

controllers.

2.31 Installing stages

Installing the stages on specific microscopes is not covered in this manual. If unsure how

to proceed please contact Prior Scientific.

TO AVOID DAMAGE TO THE OPTICS WHEN REMOVING AN EXISTING

STAGE, ENSURE THAT THE DISTANCE BETWEEN THE OBJECTIVES

AND STAGE IS MAXIMISED, AND THAT THE CONDENSER IS CLEAR OF

THE STAGE.

All stepper motor stages connect to the 25 way connector labelled “STAGE”. The linear

motor stages use a 26 way HD connector. Switch off the power using the power switch.

Connect and firmly and screw in the cable both at the controller and stage. The ProScan

will now auto detect the stage and setup the features associated with that stage in its

software.

If you have an encoded stage, plug and screw in the encoder cables, these are labelled X

and Y. Ensure the X cable is plugged into the connector on the ProScan III labelled X and

ensure the Y cable is plugged into the Y labelled connector. Power on the ProScan III. The

ProScan III will now auto detect the stage and setup the features associated with that

stage in its software.

If you have a linear stage, the same process as for encoded stages applies.

Linear stages contain an Eeprom with tuning information for that stage. When a new linear

stage is connected to the PS3 the tuning parameters are uploaded from the stage to the

controller. This may take a few minutes, during which time the green and red status LEDs

will be flashing alternately on the controller. When completed the red led will be left

flashing on its own, the controller must be power cycled to finish the upgrade after which

normal control is resumed.

Andere Handbücher für ProScan III

Inhaltsverzeichnis

Andere Prior Scientific Controller Handbücher

Prior Scientific

Prior Scientific ProScan III Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung