PRISM+ XQ270 PRO Bedienungsanleitung
XQ270 PRO
User Manual
3
Table of Contents
Section 1: Safety Precautions..................................................... 4
Section 2: Box Contents .............................................................. 5
Section 3: Product Overview....................................................... 6
3.1 – Monitor Buttons ............................................................... 6
3.2 – Monitor Ports................................................................... 6
Section 4: Stand Installation ....................................................... 7
Section 5: Mount Installation ...................................................... 8
Section 6: Connectivity Options................................................. 9
6.1 – Connecting Your Earphones............................................ 9
6.2 – DP Connectivity .............................................................. 9
6.3 – Connecting the Power Cable .......................................... 10
6.4 – HDMI Connectivity .......................................................... 10
Section 7: Basic Operation.......................................................... 11
Section 8: Indicator Light ............................................................ 11
Section 9: On-Screen Display (OSD) .......................................... 12
9.1 – OSD Menu Functions ...................................................... 13
Section 10: ECO Modes and Gameplus Swithing........................... 15
Section 11: Specifications ........................................................... 16
4
Section 1: Safety Precautions
Read and observe the following warnings and information below.
1. Please disconnect the power plug before cleaning the product. It is recommended to
wipe the monitor with a clean, soft and dry cloth. If using a damp cloth, kindly ensure
that your monitor is dry before connecting the power plug.
2. Do not use alcohol or ammonia-based cleaning agent toclean your monitor.
3. The ventilation openings are at the back of the monitor. Avoid blocking these
openings to prevent the monitor from overheating.
4.
5. Do not spray cleaner or any kind of liquid directly onto the monitor’s screen or
any part of the monitor.
6. Do not insert any objects into the monitor, especially via the ventilation openings.
7. Always make sure your monitor is placed on a stable, secure and, leveled surface
to prevent it from falling and sustaining damage.
8. Unplug your monitor during any extended periods of non-use.
9. Do not place heavy items on the monitor or monitor cables.
10.
Avoid placing the monitor near any heat sources such as portable heaters, heating
vents, or any device that produce heat as it may cause a fire.
Do not attempt to disassemble or remove parts from the monitor. Any disassembly
or modification not performed by an authorized technician can damage the monitor
and possible exposure to high voltage electricity, which may lead to severe injury
or death.
5
Section 2: Box Contents
Stand Stem x 1 Stand Base x 1
Power Adapter x 1
(DC 12V,4.0A)
User Manual x 1
DP Cable x 1
Monitor x 1
XQ270 PRO
User Manual
11mm
35mm
Screws*11mm x 3
(for stand installation)
Spacer Screws*35mm x 4
(for wall mounting)
6
Section 3: Product Overview
3.1 – Monitor Buttons
7 Audio Output: Insert one end of the audio cable into an external audio
source, e.g., speakers or headphones, to pass audio signals through the monitor.
8 DP Connector: Insert one end of the DP cable into the computer’s DP output
and connect the other end to the monitor’s DP port.
9 HDMI Connectors: Insert one end of the HDMI cable into the computer’s
HDMI output and connect the other end to the monitor’s HDMI port.
10 Power Connector: Insert the power cable to supply power to the monitor.
1 M Menu Button: Press to display the OSD menu or enter sub-menus.
2 Down Button: Press to navigate down in the menus.
3 Up Button: Press to navigate up in the menus.
4 E Exit Button:Press to exit.
5 Power Button: Press to turn on/off the monitor.
6 LED Indicator: Changes colors to indicate status. Refer to Section 8.
3.2 – Monitor Ports
2 3 4 5 61
7 910
8
7
Section 4: Stand Installation
Keep the foam underneath the monitor before attaching the stand.
1. Open the package, take out the product with foam still attached, and gently place
it on a desktop or table.
Foam
2. Place the upper and lower foam on the table and place the monitor on top of the foam.
3. Push the lock button and remove the shaft assembly as shown below..
Upper foam
Lower foam
Upper foam
Lower foam
monitor
monitor
Shaft assembly
Push up to unlock
Lock
8
4. Take out the shaft assembly and stand stem and fastened it with 2 pcs of 11mm
screws, as shown in the picture. Then, fasten the stand base and stand stem
with 1 pc of 11mm screw.
Based on the picture below, place the well assembled stand to the corresponding
slot at the back cover and ensure the shaft assembly is well attached to the monitor.
Gently lift the monitor up and ensure that the monitor is well attached.
To dismantle, operate by reversing the installation steps.
Gently lift your monitor to an upright position.
Note: Do not lift the monitor by holding on the screen to prevent breaking the
panel; The lifting range is 100mm, and the anti-sliding effect should be taken
into consideration when extracting.
5.
6.
Screw
Shaft assembly
Screw
Screw
9
Section 5: Mount Installation
3.
Wall
Mounting Base
(Not included)
Shaft assembly
2.
1. Open the package, remove the foam from the monitor, and placed it on the foam
on a stable, flat table. Removed the quick-release shaft assembly.
Install the monitor on the wall mount or bracket as desired.
VESA and mounting accessories are not included.
Take out the four hexagonal spacer screws with a height of 35mm from the
accessory bag, and fasten them into the M4 threaded hole of the rear tank sinking
slot with a screwdriver (not included). It is advised to place the monitor on top of the
foam to prevent breaking the screen.
spacer screws x 4
10
Section 6: Connectivity Options
6.1 – Connecting Your Earphones
Plug in your earphones to receive audio signals from your monitor. If you have an audio
device connected to your computer when you connect your earphones to the monitor,
the audio devices will not produce sound. Earphones and other audio devices are not
included.
Earphones (not included)
Exposure to loud audio for prolonged periods of time may permanently
damage your hearing.
6.2 – DP Connectivity
For the monitor to receive DP signals from the computer, use the DP cable to
connect the monitor tothe computer.
DP OUTPUT
DP Cable (Included)
Inhaltsverzeichnis
Andere PRISM+ Monitor Handbücher
