PROAIM Kit-6-CF Bedienungsanleitung
DSLR Filmmaking Kit
(Kit-6-CF)
INSTRUCTION MANUAL
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permied
by the applicable copyright statutes or in wring by the publisher.
PROAIM DSLR FILM MAKING KIT 6-CF 2
INTRODUCTION
PROAIM DSLR Kit 6-CF is full producon ready lmmaking equipment for prosumer operators to
increase the quality and eciency during producon. This shoulder mount camera rig is a
dynamic piece of equipment that moves with the operator in a wedding shoot, corporate
communicaons, and POP producon to produce 'slls' and videos alike. It consists of versale
camera cage, durable mae box and precise follow focus that are highly congurable and
adaptable to the daily demands of producon. It embraces the exibility to accessorize and
match producon requirements for professional results.
IN THE BOX
Please inspect the contents of your shipped package to ensure you have received all that is
pictured and listed below.
Cage brackets
4x 200mm female rods
PRO Zoom
Counter weight
Straight bracket
Rod Support System
2x 300mm female rods
Shoulder pad
Handle Set
Top Handle
Gear Ring Belt
Speed Crank
Shim Set
X9 Follow Focus
2x 150mm male rods
Mic-suspension
15mm adapter
Accessories
Matte Box MB-600
weight brackets
Shoulder Rig Support Rod
PROAIM DSLR FILM MAKING KIT 6-CF 3
ASSEMBLING YOUR MB-600 MATTE BOX
Insert the French ag (top) to your mae box as shown below and then ghten the knob.
Insert the Side ag to your mae box as
shown below and then ghten the knob as
shown below.
Wrap the knicker on conversion ring, as
shown in the image
PROAIM DSLR FILM MAKING KIT 6-CF 4
Aach rod support system to your tripod plate and ghten with screw driver. Then mount
the setup onto your tripod and secure with provided knob.
Loosening the knob and simple push of provided buon on quick release adapter allows
you to remove quick release plate. Now aach it to camera base and ghten to secure.
Assembling Your DSLR Filmmaking Kit 6-CF
Slide in the camera setup onto quick release adapter, reghten the knob to ensure slip free
connecon.
PROAIM DSLR FILM MAKING KIT 6-CF 5
Loosen the knob on cage bracket in order to insert it to 450mm rails. Using same approach
insert another bracket to front of rails and ghten to secure.
Now insert 2x 300mm female rods into quick release adapter. Now aach 2x 150mm
extension rods to rails and ghten the knobs.
Loosen the knobs on top of cage brackets in order to insert 2x200mm rods into them,
reghten to secure.
PROAIM DSLR FILM MAKING KIT 6-CF 6
Aach top handle to 200mm rods at cage top, reghten the knob to ensure slip free
connecon.
Aach straight bracket to back of rail system and ghten the knob. Then insert 2x200mm
rods into it and secure with provided knob.
Now insert shoulder pad to 200mm rails, also aach counter weight and secure with
provided knob.
PROAIM DSLR FILM MAKING KIT 6-CF 7
Aach exible gear ring to your camera lens and ghten the screw.
Now insert X9 follow focus to front of rail system, adjust follow focus with your camera and
secure.
You can also aach speed crank to fol-
low focus as per your requirement.
PROAIM DSLR FILM MAKING KIT 6-CF 8
Now insert MB-600 mae box to front rails, align with lens and secure with the knob as
shown below.
Aach handle setup to front of rods and ghten the knobs to secure it.
NOTE: You can lt handle set as per your requirement by loosen the knob.
PROAIM DSLR FILM MAKING KIT 6-CF 9
(SHOWN WITH OPTIONAL ACCESSORIES)
Note: If you wish to use your setup with shoulder rig support rod then please use following
sequence of text and pictures to assemble your kit.
A S S E M B L I N G Y O U R S H O U L D E R R I G S U P P O R T R O D
Wear your belt around your waist and secure with the help of velcro as shown below.
YOUR PROAIM DSLR FILMMAKING KIT 6-CF
ALL DRESSED UP AND READY TO GO
PROAIM DSLR FILM MAKING KIT 6-CF 10
Aach rod support to waist belt properly. You can adjust the height of your rod support
with the help of provided knobs.
YOUR DSLR FILMMAKING KIT 6-CF WITH ROD SUPPORT
ALL DRESSED UP AND READY TO GO
(SHOWN WITH OPTIONAL ACCESSORIES)
Aach the rod support to your shoulder rig via 15mm rod adapter .This set up allows you to
have fague free and long comfy shoots.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere PROAIM Kamerazubehör Handbücher
PROAIM
PROAIM DL-BRZA-01 Bedienungsanleitung
PROAIM
PROAIM FLN-CTDB Bedienungsanleitung
PROAIM
PROAIM Follow Focus X9 Bedienungsanleitung
PROAIM
PROAIM PTZ-10 Bedienungsanleitung
PROAIM
PROAIM RS-1-00 Bedienungsanleitung
PROAIM
PROAIM JK-ATV-01 Bedienungsanleitung
PROAIM
PROAIM SL-WG Bedienungsanleitung
PROAIM
PROAIM Flylite Bedienungsanleitung
PROAIM
PROAIM Power Pack Bedienungsanleitung
PROAIM
PROAIM Bowado Pro Bedienungsanleitung
PROAIM
PROAIM P-18-JS Bedienungsanleitung
PROAIM
PROAIM CH-FS7-TB Bedienungsanleitung
PROAIM
PROAIM CT-STRK-02 Bedienungsanleitung
PROAIM
PROAIM HS-1000 Bedienungsanleitung
PROAIM
PROAIM Fusion Bedienungsanleitung
PROAIM
PROAIM STD-PTZ-01 Bedienungsanleitung
PROAIM
PROAIM PT-SPN Bedienungsanleitung
PROAIM
PROAIM RS274 Bedienungsanleitung
PROAIM
PROAIM CINEMA Series Bedienungsanleitung
PROAIM
PROAIM CINEMA Series Bedienungsanleitung
