PROAIM CT-SDCF-SD Bedienungsanleitung
1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Smart-Lock Boom Drawer for Soundchief Cart
Workstaon (CT-SDCF-SD)
Assembly Manua l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Proaim Smart-Lock Drawer for Soundchief Cart
1 x L-type Allen key (5/16”)
1 x Wrench (17)
2
• Properly detach the upper and lower secon
of the Soundchief Cart (Not Included).
• Remove the bolts on the boom wheel
bracket of the Soundchief cart (Not Included)
with the help of an Allen key.
Smart-Lock Boom Drawer Setup
• Push the pin up slightly to properly detach the
side panels and remove it properly from the
Smart-Lock drawer.
• Follow the same process for removing the
side panel of another side.
• Using a wrench, unscrew the bolt on the
inner bar of the Soundchief cart
(Not Included) so that the upper and lower
secons can be separated.
• Place the side panel in the center of the upper
or lower secon of the cart (Not Included),
and then insert the bolt by matching the hole.
Side Panel Detachment from Proaim Smart-Lock Drawer
Push Pin
3
• Insert the Allen bolt matching the thread
holes of the cart and side panels.
• Insert the Smart-Lock drawer manually by
sliding it into the side panel, as shown in the
image.
NOTE: The soft-closing side panel prevents the
colliding & crashing of gears that is inside the
drawer.
NOTE: Proaim Smart-Lock Drawer is a deep &
fully enclosed drawer that takes in all suitable
audio/video producon accessories & facilitates
convenient access to them along with protec-
on.
• Secure the side panel to the lower secon of
the cart using washers and ghten it with the
help of a wrench.
• Re-insert the bolts into the wheel bracket
aer aaching the side panel to the
Soundchief cart (Not Included) and securely
ghten the bolts with the help of an Allen
key.
• Follow the same process as above to secure
another side panel.
4
NOTE: It features a 3-digit personalized
combinaon lock that ensures your valuable
gear is fully protected & makes you work with
full freedom without worrying about the
drawer’s stu.
How to Fit Channel Lock Drawer Into Boom Rack in Soundchief Cart, Follow this Video
hps://bit.ly/3BK6VoQ
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
YOUR PROAIM SMART-LOCK BOTTOM DRAWER FOR SOUNDCHIEF CART WORKSTATION
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Inhaltsverzeichnis
Andere PROAIM Outdoor-Wagen Handbücher
PROAIM
PROAIM CINEMA CT-SDCF-CV3 Bedienungsanleitung
PROAIM
PROAIM Victor Pro CT-VCTR-PRO-32 Bedienungsanleitung
PROAIM
PROAIM CINEMA Series Bedienungsanleitung
PROAIM
PROAIM Bowado Pro V1 Bedienungsanleitung
PROAIM
PROAIM Cinema Vanguard CT-VNGD-CS Bedienungsanleitung
PROAIM
PROAIM CT-SDCF-L-01 Bedienungsanleitung
PROAIM
PROAIM CT-VNGD-UCN Bedienungsanleitung
PROAIM
PROAIM CT-VNGD-UC5 Bedienungsanleitung
PROAIM
PROAIM CINEMA Series Bedienungsanleitung
PROAIM
PROAIM CINEMA CT-SDCF-PRO Bedienungsanleitung
