PROAIM TP-SPH Bedienungsanleitung
1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything
that is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable
copyright statutes or in wring by the Publisher.
Professional Speech Teleprompter (TP-SPH)
Assem b l y M a n u a l
NOTE: If you have purchased Speech teleprompter (TP-SPH-01), you will receive the following:
LCD Stand Base Plaorm
Accessories
Main Rod
2 x Rods
I-pad Tray
Gloves
Glass
Telescopic
Rod
2
Teleprompter Setup
To keep the Stand Plaorm in a stac posion
(non-movable), lock down the wheels using
the provided brakes.
Aach the main rod with a telescopic rod and
secure it by twisng them.
Now insert the main rod onto the Base
Plaorm and ghten bolts with the Allen
key's help.
If you want to extend the stand's height, you
can raise the 3rd secon using a speed crank
knob. Tighten the knob aer geng the
desired size.
VGA Cable
HDMI Cable
Power adapter
Power adapter
cable
Remote
NOTE: If you have purchased Speech teleprompter (TP-SPH-02), you will also receive the following:
LCD Monitor
3
If you further need to increase the height,
then loosen the bolt from the boom of the
telescopic rod, adjust as per the required
height and ghten the bolt to secure.
Loosen both the knobs of the iPad tray clamp
and adjust as per the required height.
Loosen the knobs of the iPad clamp to insert
both rods & ghten the knobs to secure
them.
Loosen the knob of iPad tray, Insert the iPad
secon & ghten the knob.
Aach the iPad tray with clamp and ghten
both side knobs to secure it.
Centre align the glass and place in the glass
holder and ghten the knob to secure.
4
NOTE: You can adjust the angle of the glass by
using the provided knob, as shown.
For installing LCD Monitor, rst, remove the
I-Pad Holder tray. Now, put the LCD monitor
on the base plaorm.
Now, loosen the knobs of the LCD monitor, as
shown in the image.
The LCD Monitor has dierent ports; now,
connect the HDMI cable to the HDMI port.
Now, connect the power adapter cable to the
respecve port.
Lastly, insert the bolts into the Base Plaorm
to secure the LCD monitor with it.
I-Pad Tray
Monitor Setup
5
YOUR PROAIM SPEECH TELEPROMPTER
ALL DRESSED UP AND READY TO GO!
Warranty: We oer one year warranty for our products from date of purchase. Within this period of
me, we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor
does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to
inspecon and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling
in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our
company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
Inhaltsverzeichnis
Andere PROAIM Serviceausrüstung Handbücher
