ProAudio MT12 Bedienungsanleitung

MT12

Manual

MT12

Multi-purpose Speaker

Dear user,

ﬁrst of all we would like to say a big thank you for your decision

and the conﬁdence you were thus placing in us.

On the following pages you will ﬁnd important information and

technical instructions regarding the correct usage and care of the

loudspeaker.

Pleae read this manual carefully before initial operation and do

observe all safety instructions.

This manual is an essential part of the product. Please keep the

manual in a safe place for future reference to have it at hand,

should any questions or uncertainties arise.

If you pass on the product to a third party, among other things,

you need to make sure that the manual is enclosed with the

product.

In case you might need additional manuals, we ask you to contact

us.

ProAudio Technology GmbH

Hermann-Schwer-Strasse 3

78048 Villingen-Schwenningen

Germany

Phone: +49 (0) 77 21 / 99 81 96 - 0

Fax: +49 (0) 77 21 / 99 81 96 - 9

info@proaudio-technology.de

www.proaudio-technology.de

Symbols:

Hazardous

voltage

Caution

danger

Strictly

observe

Information on the manual:

Manual

MT12 Multi-purpose Speaker Version 1.0 ENG

ProAudio Technology Last update November 2012

Items delivered:

• Multi-purpose Speaker

• Manual

Contents:

• Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

• General Safety and Care Instructions . . . . . . . . . . . . . . . . . 3

• Description and Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

• Operation on System Ampliﬁers . . . . . . . . . . . . . . . . . . . . . 4

• Operating Modes

[1] MT12 Fullrange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

[2] MT12 with Subwoofer . . . . . . . . . . . . . . . . . . . . . . . . . 6

[3] MT12 as Nearﬁeld Speaker . . . . . . . . . . . . . . . . . . . . . 9

• Drawings / Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

• Technical Speciﬁcations . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

• Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

• Declaration of Conformity . . . . . . . . . . . . . . . . . 11

MT12

General Safety Instructions:

Professional loudspeakers can produce harmful sound pressure

levels. SPLs above 95 dB can permanently damage your hearing.

Observe the relevant guidelines regarding working safety and

health protection.

To avoid physical and personal damages due to loudspeakers

dropping or tumbling over, please make sure that the speakers

stand safely on a ﬁrm ground.

Vertically stacked loudspeakers must be secured sufﬁciently with

tension belts against unintentional movement.

Check all cabinets and accessories regularly for wear, especially

the ﬂying rails and the tripod ﬂange. Replace them if necessary.

Make sure that during operation on spacer tubes, no persons will

stand close to the loudspeakers.

Use only accessory parts speciﬁed by ProAudio Technology or

original accessory parts from ProAudio Technology.

Loudspeakers always produce a magnetic ﬁeld. Make sure

that during transport, setup and disassembly and also during

operation of the loudspeakers no objects (such as laptops,

harddisk drives, credit cards and the likes) get close to the

speakers which could become damaged by the magnetic ﬁeld.

People who have a pacemaker must keep a safety clearance.

The minimum recommended safety clearance is 1 m.

Do not set up the loudspeakers in places where they are

permanently exposed to moisture, dust, dirt or direct sunlight.

Care:

Wipe the surface of loudspeakers only with a damp cloth and

pure water.

In case of heavy pollution, repeat the above procedure several

times if necessary.

Do not use any chemical additives or aggressive detergents, as

these may harm and damage the surfaces.

Note:

Only one 4-pole cable is

required to connect 2-channel

conﬁgurations of several MT12

and SW18 / SW28 subwoofers.

Only one 4-pole cable is required

to connect two e.g. monitor paths

elegantly without additional

reversible cables.

Description:

The MT12 is a universal 2-way multi-purpose loudspeaker with a

built-in passive frequency crossover. It is equipped with one 12“

cone chassis with a water-repellent coating and one 1.4“ high-

frequency driver. The directivity characteristic is 80° x 60° (h x v).

This loudspeaker is to be used exclusively with the

ProAudio Technology system ampliﬁers.

Different setups enable a practice-oriented usage with or without

SW18 / SW28 subwoofers.

Alternatively Hoellstern DELTA series ampliﬁers with built-in DSP

may be used. Should you have any questions, please contact

ProAudio Technology regarding this subject.

Cabinet:

The cabinet is made of 15 mm birch multiply wood and coated

with a robust 2-component texture paint ﬁnish. A 45° corner

allows it to be used as a monitor speaker. It is ﬁtted with two

handles, eight stacking feet and a tripod ﬂange. Two ﬂying rails

and six M10 ﬂying points complete the list of features. Behind the

front grille is a layer of black acoustic foam.

Connection:

The connections are made on the rear side through a total of four

Neutrik NL4 SpeakON sockets which are angled in two directions

by 45 degrees relative to the rear cabinet wall. Three of the

four sockets are wired in parallel with each other. Pin pair 1 is

connected to the speaker chassis. On the fourth SpeakON socket,

which is marked correspondingly and rotated by 180 degrees, the

pins have been reversed. Pin pair 2 is connected to the speaker.

Combinations of MT12 and subwoofers, which are fed via a 4-

pole lead, must be connected only to the non-marked SpeakON

sockets!

Never use the marked SpeakON socket that is arranged rotated

by 180 degrees.

Operation on System Ampliﬁers:

The ampliﬁer conﬁguration software will display help texts for the

individual loudspeakers. Select a setup which contains the name

“MT12“.

On the DELTA8.4-DSP system ampliﬁer up to two MT12 can be

driven per channel.

On the DELTA14.4-DSP system ampliﬁer a maximum of four

MT12 can be driven per channel.

Details will be shown by the software upon entering the number

of MT12 speakers per channel.

Note:

Use the MT12 loudspeaker only

on system ampliﬁers with the

available setups. Otherwise there

may be a risk of damage and

inadequate performance.

MT12

DELTA 8.4-DSP

1 4

2 3

DELTA 8.4-DSP

1 4

2 3

Operation modes

The four loudspeakers are wired using 4-pole speaker cables.

Each ampliﬁer channel will drive one speaker.

Four ampliﬁer channels will be assigned.

The eight loudspeakers are wired using 4-pole speaker cables.

Each ampliﬁer channel will drive two speakers.

Four ampliﬁer channels will be assigned.

[1] MT12:

DELTA 8.4-DSP

The four loudspeakers are wired using 4-pole speaker cables.

The two speakers (1) and the two speakers (2) will each be driven by one

dedicated ampliﬁer channel.

Two ampliﬁer channels will be assigned. Channels three and four may be

used to set up an identical conﬁguration.

The subwoofer is wired together with one top using 4-pole speaker cables.

Likewise, the second top is wired using a 4-pole speaker cable. Each

ampliﬁer channel will drive one speaker. The two tops will be run in stereo,

the subwoofer in mono mode.

Three ampliﬁer channels will be assigned.

[2] MT12 with Subwoofer:

DELTA 8.4-DSP

1 2

MT12

DELTA 8.4-DSP

One subwoofer and two tops on either side are wired using 4-pole speaker

cables. Each ampliﬁer channel will drive one subwoofer and two tops in

stereo mode.

Four ampliﬁer channels will be assigned.

Two subwoofers and one top on either side are wired using 4-pole speaker

cables. Each ampliﬁer channel will drive two subwoofers and one top in

stereo mode.

Four ampliﬁer channels will be assigned.

DELTA 8.4-DSP

The subwoofer is wired together with one top using 4-pole speaker cables.

Likewise, the second top and the fullrange speaker are wired using 4-pole

speaker cables.

Each ampliﬁer channel will drive one speaker.

Three ampliﬁer channels will be assigned for the PA.

The two tops are run in stereo, the subwoofer in mono mode. The fourth

ampliﬁer channel may be used separately e.g. for monitoring or as a delay

line. In total four ampliﬁer channels will be assigned.

One subwoofer and two tops are wired on either side using 4-pole speaker

cables. Likewise, the two tops and the two fullrange speakers are wired

using 4-pole speaker cables.

Each ampliﬁer channel will drive one subwoofer plus two tops in stereo

mode.

Three ampliﬁer channels will be assigned for the PA.

The fourth ampliﬁer channel may be used separately e.g. for monitoring or as

a delay line. In total four ampliﬁer channels will be assigned.

DELTA 8.4-DSP

MT12

Rear

DELTA 14.4-DSP

Rear

DELTA 14.4-DSP

The six subwoofers per side are wired using 4-pole speaker cables. The nearﬁeld

speakers are connected to the ampliﬁer with 4-pole speaker cables. The two tops

are each connected to the pin-reversed socket of the nearﬁeld speaker using

4-pole speaker cables.

The six subwoofers are driven by two ampliﬁer channels in mono cardioid mode.

The two tops are both driven by one ampliﬁer channel. The nearﬁeld speaker is

also driven by one ampliﬁer channel.

The entire system is then set for stereo operation.

Four ampliﬁer channels will be assigned per side.

[3] MT12 as Nearﬁeld Speaker

585

380

330

Drawings / Dimensions:

Andere Handbücher für MT12

Inhaltsverzeichnis

Andere ProAudio Sprecher Handbücher

ProAudio

ProAudio VT8 Bedienungsanleitung

ProAudio

ProAudio M20 Bedienungsanleitung

ProAudio

ProAudio DK90T Bedienungsanleitung

ProAudio

ProAudio MT10 Bedienungsanleitung

ProAudio

ProAudio SCRS-5iw Bedienungsanleitung

ProAudio

ProAudio DP50T Bedienungsanleitung

ProAudio

ProAudio DK80T Bedienungsanleitung

ProAudio

ProAudio SCR-2115sm Bedienungsanleitung

ProAudio

ProAudio MT10 Bedienungsanleitung

ProAudio

ProAudio SPLT.3 Bedienungsanleitung

ProAudio

ProAudio AIR Series Bedienungsanleitung

ProAudio

ProAudio AIR Series Bedienungsanleitung

ProAudio

ProAudio MT12 Bedienungsanleitung

ProAudio

ProAudio HT16 Montageanleitung

ProAudio

ProAudio CS850SUB Bedienungsanleitung

ProAudio

ProAudio HT16 Bedienungsanleitung

ProAudio

ProAudio DS67T Bedienungsanleitung

ProAudio

ProAudio SCR-2215sm Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung