proavio EB400CR Bedienungsanleitung


1

2
Table of Contents
Preface..............................................................................................................................3
Before You Begin............................................................................................................4
Chapter 1 Introduction.................................................................................................6
1.1 Technical Specifications................................................................................................................. 7
1.2 Proavio EB400CR System Overview .............................................................................................8
1.2.1 Front View...............................................................................................................................8
1.2.2 Rear View............................................................................................................................. 10
1.3 RAID Concepts ............................................................................................................................ 11
1.3.1 Definition of RAID Levels......................................................................................................11
1.3.2 RAID Levels Summary ................................................................................................... 14
Chapter 2 Getting Started .........................................................................................14
2.1 Installing Hard Drives......................................................................... Error! Bookmark not defined.
2.1.1 3.5” SATA Disk Installation .......................................................... Error! Bookmark not defined.
2.1.2 2.5” SATA Disk Installation ......................................................... Error! Bookmark not defined.
2.3 Connecting Your EB400CR.......................................................................................................... 15
Chapter 3 Configuration Utility.................................................................................16
3.1 Install the Configuration Utility in Windows...................................................................................17
3.2 Install the Configuration Utility in Linux......................................................................................... 19
3.3 Install the Configuration Utility in Mac OS..................................................................................... 20
3.4 RAID Management GUI ...............................................................................................................22
3.4.1 RAID GUI Navigation............................................................................................................ 23
Chapter 4 RAID Configuration & System Operation .............................................26
4.1 Basic Mode .................................................................................................................................. 26
4.1.1 RAID and Disk Information.................................................................................................... 26
4.1.2 Event Log Viewer.................................................................................................................. 29
4.1.3 Basic Raid Configuration....................................................................................................... 30
4.2 Advanced Mode........................................................................................................................... 34
4.2.1 Email Notification.................................................................................................................. 34
4.2.2 Advanced Raid Configuration ............................................................................................... 36
4.2.3 Firmware Information............................................................................................................40
4.2.4 RAID Settings .......................................................................................................................42

3
Preface
About this manual
Congratulations on your purchase of Proavio EB400CR. This guide provides complete installation and operation
instructions designed to help you get the most out of your new EB400CR desktop RAID array. Information contained
in this guide is subject to change without notice.
This guide uses the following symbols and icons to address important related information, reminders,
recommendations and warnings:
Copyright
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, photocopying, recording or otherwise, without the prior written consent.
Trademarks
All products and trade names used in this document are trademarks or registered trademarks of their respective
holders.
Changes
The material in this document is for information purposes only and is subject to change without notice.
IMPORTANT!
This symbol is used to indicate a strong suggestion, important reminder
or guideline.
WARNING!
A warning describes an action that could cause physical harm or damage
your computer equipment. Follow the guidelines in this document to avoid
personal injury during use.
CAUTION:
Caution means that a specific action taken could cause damage to your
equipment or lead to data loss.
NOTE:
A note provides useful information, tips and best practice
recommendations.

4
Before You Begin
Upon receiving of the product:
•Place the product on a clean, anti-static work surface.
•Handle the system with extreme care.
Upon installing of the product:
•Maintaining proper temperature is important for optimal system reliability. Ambient temperature should not
exceed 104°F (40°c).
•Before plugging-in any power cords, cables and connectors, make sure that the power switches are turned off.
Controller Configuration
•This Proavio EB400CR features a single RAID controller design.
Precautions
•Before removing the system from the shipping carton, you should visually inspect the physical condition of
the shipping carton.
•Unpack the system and verify that the contents of the shipping carton are all there and in good condition.
•Exterior damage to the shipping carton may indicate that the contents of the carton are damaged.
•If any damage is found, do not remove the components; contact the dealer where you purchased your system
for further instruction

5
Accessories
The following accessories are included with your EB400CR
Item Description
Power cable (IEC)
eSATA cable
USB 3.0 cable
FireWire 800 (IEEE 1394b) cable
Installation CD & GUI

6
Introduction 1
EB400CR Media Storage Array
General Features
•Multi-interface, RAID storage solution.
•Compact desktop design.
•USB 3.0 (5Gbps) / eSATA (3Gbps) / 1394b (800Mbps) host interfaces.
•Support disks larger than 2TB.
•Supports hot drive spare and automatic RAID rebuild/regeneration.
•Event logging and email notification capabilities.
•Easy “in-band” system management.
•Transparent data protection for all popular operating systems
•Real-time drive activity and status indicators.
Powerful RAID Capabilities
•On-board RAID controller.
•Offers a wide variety of storage modes for any application.
Easy Installation & Maintenance
•Fast and easy to install, hot-swappable disks.
Next Generation Design
•Cable-less internal backplane architecture.
•Floating hard drive module design.
System Management
•LCD Control Panel
•Graphical User Interface (GUI)

7
1.1 Technical Specifications
Technical Specification Feature
RAID Controller On-board RAID Controller
RAID Levels 0, 1, 3, 5, 10, LARGE, CLONE
Host Bus Interface eSATA * 1 / USB 3.0 * 1 / 1394b * 2
Number of Host Channel 1
Data Transfer Rate
Support up to 5Gbps (USB 3.0)
Support up to 3Gbps (eSATA)
Support up to 800Mbps (1394b)
Drive Bus Interface SATA-3 (Up to 6.0Gbps)
Hot-swap Disk Drive Carriers Four (4) 3.5-inch disk drive carriers
Cooling Fan 1
Failed Drive Indicators Yes
Failed Drive Auto Rebuild Yes
Environment Monitor Yes
Auto Spare Support Yes
Power Supply 180W (auto-sensing, full range)
Environmental Relative Humidity:
Operating Temperature:
10% ~ 85% Non-condensing
50°F ~ 104°F (10°C ~ 40°C)
Dimension(Convertible) Desktop: 196 (H) x 149(W) x 260(D)mm
Desk-side: 149 (H) x 196(W) x 260(D)mm
Weight 15.4lbs (7Kg) without disks
Specifications are subject to change without notice.

8
1.2 EB400CR System Overview
The illustrations below identify the various components of your EB400CR system.
1.2.1 Front View
Feature Function
Disk Drives Four (4), hot-swap, 6Gb/s SATA-III disk drives.
LCD Control Panel Back-lit LCD control module for easy and quick configuration.
System Power LED Visual power status reference.
Fault LED Visual RAID and system status reference.
HDD Locks Locking disk modules provide added security.
Disk Status LEDs Visual Power/Activity and Disk Fault reference.

9
1.2.1.1 Disk Drive Module
Feature Function
HDD Activity LED BLUE - LED will flash blue during access.
HDD Fault LED GREEN - Hard drive detected/good.
RED - Hard drive has failed.
OFF - Hard drive not detected.
1.2.1.2 LED Indicators
Feature Function
Fan Fail LED OFF – Cooling fan is working properly.
RED – Cooling fan has failed.
Over Temp LED OFF - Temperature is normal.
RED - Temperature has exceeded the recommended range.
Power On LED WHITE - RAID system is powered on.
Inhaltsverzeichnis
Andere proavio Lagerung Handbücher
Beliebte Lagerung Handbücher anderer Marken

Spectra Logic
Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic
Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus
Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor
Rocstor COMMANDER 3F series Bedienungsanleitung

HP
HP P9000 Bedienungsanleitung

Western Digital
Western Digital Ultrastar Data60 Bedienungsanleitung













