Operation instruction GB
Attention: Please read the following instructions carefully to ensure that mounting
operation will be carried out in the right way .These instructions should be properly
preserved for future reference
.
Ⅰ.Main construction Data
Ⅱ.Safety instructions
1. Before mounting and maintenance please make sure that the electrical supply has been
switched off to avoid electric shock.
2. The lamp must be earthed.
3. The power cord must be H07RN-F 3x 1.5 mm 2cable waterproof.
4. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively
replaced by the manufacturer or his service agent or a similar qualified person in order to
avoid a hazard.
5. Replace any cracked protective shield.
6. Before the maintenance work takes place, the power should be switched off. The
maintaining should be done only by a qualified electrician.
7. The appliance is equipped with sockets. Make sure that the summation of output
electritity is less than 16A.
8. The lamp only can be used with the bracket extended.
