Projoy Electric PEFS-PL80S-11 Bedienungsanleitung

www.projoy-electric.com

Installation

Guide

RSD PEFS-PL80S-11/21

www.projoy-electric.com

RSD PEFS-PL80S

Operation Manual of Panel Level Rapid Shutdown

1. Scope and General

2 Safety instructions and regulations

2.1 Symbols explanation

2.2 Safety instructions

3 Technical Data/Speciﬁcation and product information

3.1 Parameters Table

3.2 Product Information

4 Installation

5 Trouble shooting

6 Maintenance and Repair

7 Warranty commitment

8 Contact us

CONTENT

1 Scope and General

2.1 Symbols explanation

2 Safety instructions and regulations

For your safety and eﬀective operation, please read the safety instructions thoroughly before using the product.

Safety Instructions should always be observed in order to prevent accident or risk with the safe and proper use the

product.

Instructions are separated into “DANGER”, “WARNING” and “CAUTION” etc., and the meaning of the terms is as follows:

The manual only used to PEFS-PL80S-11,PEFS-PL80S-21 model Panel-level Rapid Shutdown.

Version Date Remark Chapter

V1.0 2021-10-15 First Edition -

CAUTION ‒ Hot surfaces ‒ To reduce the risk of burns ‒ Do not touch.

Risk of electric shock from energy stored in capacitor, Do not remove

cover until ___ minutes after disconnecting all sources of supply.

Risk of Electric Shock

the installation and operation of inverter can only be performed by

qualiﬁed personnel

The inverter must not be disposed of together with household waste

Observe all documentation that accompanies the inverter

Not touch

Risk of Electric Shock, Do Not Remove Cover. No User Serviceable Parts

Inside. Refer Servicing To Qualiﬁed Service Personnel

The information should add to operation and troubleshooting and

installation clause

SYMBOLS DIRECTIONS NOTED

DANGER

IF have the

electronic C

DANGER

WARNING

CAUTION

www.projoy-electric.com

RSD PEFS-PL80S

2.2 Safety instructions Caution!

3 Technical Data/Speciﬁcation and product information

1) Need permission from the local utility prior to connecting the product to the utility grid and hire qualiﬁed personnel.

2) Observe all documentation that accompanies the product.

3) Installations maintenance and installed should be carried out by competent persons, who have suﬃcient skills and

training to apply safe methods of work to install.

4) All electrical installations must be done in accordance with the National Wiring Rules of Standard and local code.

1) Adopt Fire-retardant V-0/UV resistant materials, high temperature resistance, corrosion resistance and security impact

resistance.

2) Snap Joints design, simple and convenient for installation, reduce installation costs.

3) Long lifespan design suitable for 25 years solar system requirement, normally working environment at -30℃~+80℃, cut oﬀ

the solar panels automatically once the temperature in excess of 85℃.

4) Real-time monitoring and Optimizing Solar Power Generation, Enhance the power generation volume.

5) The connection cable with UL and TUV qualiﬁcation, Maximum Output Voltage up to 120Vdc.

6) Optional color: White/orange/black; PLC control method or DC 24V manual control are all available.

7) One rapid shutdown can control 1,2, or 4 solar modules, Suitable for residential and commercial solar systems.

Normal installation of PEFS-PL80S-11/PEFS-PL80S-21 will be the connection of one/two PV panels in series to one RSD unit

(typical wiring example below). Where the combined rating of two panels exceeds the rating of the

PEFS-PL80S-11/PEFS-PL80S-21, or to meet regulatory compliance, 1-to-1 connection of the PV module to the FireRaptor can

be used. See diagram on page 3.Connect the array Positive (+) output connector to the FireRaptor Positive (+) input connec-

tor. Connect the array Negative (-) output connector to the FireRaptor Negative (-) input connector.

3.1 Parameters Table

3.2 Product Information

Model PEFS -PL80S -11 PEFS -PL80S -21

Input:

Max. System Voltage 1000V 1000V

Input Vmax PV (Vdc) 80Vdc 80Vdc

Output Vmax PV (Vdc) 80V 160V

Isc PV (absolute Max.) (A) 20A 20A

Mppt Voltage range (Vdc) 0-80V 0-80V

Max. input current(A) 20A 20A

Rapid Shutdown time limit 1S

Initiators Loss of Power supply

DC input power 24VDC, 0.1A

others

Ingress protection Type 6P

Temperature (℃ ) -30 to +80℃

Others

Size (mm) 120*52*22 120*59*22

Environment humidity 0-90%

4 Installation

www.projoy-electric.com

RSD PEFS-PL80S

Where reference has been made above to the use of the PEFS-PL80S-11/PEFS-PL80S-21 as the source of supply of the

24VDC, it can also be considered that power can be supplied to the RSD units by an alternative suitably rated UL Approved

24VDC Class II power supply (AC/DC or DC/DC types). This power supply unit should be used in conjunction with a shutdown

initiator that ensures disconnection of the 24VDC supply upon operation, and for the PEFS-PL80S-11/PEFS-PL80S-21 the

appropriate in-line fuse must also be installed in the 24VDC line.As the supply of these parts are outside the scope of Projoy

we recommend that the device’s instructions of use are fully understood and the necessary appropriate precautions made

when using such parts; and that the correct 24V/0V polarity connections are made as indicated in this installation guide.

One RSD PEFS-PL80S-11/PEFS-PL80S-21 will control two solar panels and by series connection of the FireRaptor, multiple

solar panel pairs can be connected to form a greater capacity system. The diagram below illustrates a typical example of a

FireRaptor protected installation using eight solar panels and four PEFS-PL80S-11/PEFS-PL80S-21 FireRaptors.

MULTIPLE INSTALLATIONS

If it is found that the product cannot be output�

1) Please check whether the 24V power supply is normal. After the 24V power supply is restored, the product can output

normally.

5 Trouble shooting

www.projoy-electric.com

RSD PEFS-PL80S

N≤60

String

DC 24V

Power out

String

DC 24V

Power out

2) Please remove the product ﬁrst and check the temperature of the product. If it is very hot (over 120°C), do not deal

with it at this time. After the temperature of the product is lowered, it will resume normal operation.

3) Check the input and output connectors, whether they are correctly connected and inserted, as shown in the ﬁgure

below：

Please check regularly. Speciﬁcally, you can press the control box to check whether the output of the whole string is stopped

or the output voltage is less than 10V. If the output voltage is greater than 10V, it indicates that there is a fault in the system.

Please contact Projoy after-service for handling.

In order to provide you with high-quality service and better protect your rights and interests, please read this regulation

carefully and keep your quality assurance card and purchase invoice.

We will provide you with standard warranty service for 300 months. From the date of purchase, during the warranty period,

we will provide you with free warranty and maintenance services. The faulty product needs to be returned to the factory for

repair, so please keep the original package properly. If the customer uses the new packing box, the packing cost and trans-

portation cost will be borne by the customer. During the warranty period, the customer needs to provide the original invoice

and quality card, and the label of the product body is clearly visible. If these requirements cannot be met, we will not be able

to provide you with perfect service.

6 Maintenance and Repair

7 Warranty commitment

www.projoy-electric.com

RSD PEFS-PL80S

This regulation is applicable to PEFS-PL80S-11,PEFS-PL80S-21 model Panel-level Rapid Shutdown produced by PROJOY.

All products purchased through regular channels shall enjoy the full range of quality assurance services provided by the

company, except for the following situations:

1. Beyond the warranty period;

2. No valid quality assurance card and product serial number;

3. Transportation damage;

4. Improper use, operation and modiﬁcation;

5. Operating in an environment beyond the speciﬁed in this manual;

6. Any installation and use beyond the scope speciﬁed in relevant international standards;

7. Damage caused by abnormal natural disasters (earthquake, ﬁre, ﬂood, etc.).

Projoy Electric Co., Ltd.

Tell： +86-512-6878 6489

Web: https://en.projoy-electric.com/

Add: 2nd Floor, Building 3, No. 2266, Taiyang Road, Xiangcheng District, Suzhou

8 Contact us

www.projoy-electric.com

RSD PEFS-PL80S

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Projoy Electric Solarpanel Handbücher

Projoy Electric

Projoy Electric PEFS-EL Series Bedienungsanleitung

Beliebte Solarpanel Handbücher anderer Marken

Navitron

Navitron HFC-2 Bedienungsanleitung

AXITEC

AXITEC 60-CELL Bedienungsanleitung

thermital

thermital TSOL 20 N BLU Bedienungsanleitung

AZO Digital

AZO Digital MPPT-3000 Bedienungsanleitung

Clenergy

Clenergy PV-ezRack SolarTripod Bedienungsanleitung

Beretta

Beretta SCF-20N Bedienungsanleitung

moovo

moovo KSM001 Produkthandbuch

solarwatt

solarwatt EasyIn 60M Series Bedienungsanleitung

Solarland

Solarland Portable Series Handbuch

Ubiquiti

Ubiquiti sunMAX Bedienungsanleitung

Lippert

Lippert Furrion FSFP37MW-BL Bedienungsanleitung

Sonnenkraft

Sonnenkraft GK5-HP Bedienungsanleitung

REC

REC TwinPeak 2S Mono 72 Series Bedienungsanleitung

Sunforce

Sunforce 50039 Bedienungsanleitung

Flexsolar

Flexsolar C100 Leitfaden

Süd Solar

Süd Solar 03005 Bedienungsanleitung

Kodak

Kodak SP21 Bedienungsanleitung

Carmanah

Carmanah Go Power! Solar Flex GP-FLEX-30 Bedienungsanleitung