ProLights STUDIOCOB TU-DY Bedienungsanleitung
USER MANUAL
MANUALE UTENTE
STUDIOCOB TU-DY
EN - IT
DIFFUSED LIGHT PROJECTOR
STUDIOCOB TU-DY
2
All rights reserved by Music & Lights S.r.l. No part of this instruction manual may be
reproduced in any form or by any means for any commercial use.
In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the
characteristics stated in this instruction manual at any time and without prior notice.
All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it
REV.02-06/18
1
STUDIOCOB TU-DY
Packing content STUDIOCOB
• Power cable
• User manual
TABLE OF CONTENTS Safety
General instructions
Warnings and installation precautions
1 Introduction
1. 1 Description
1. 2 Technical specications
1. 3 Operating elements and connections
2 Installation
2. 1 Mounting
3 Functions and settings
3. 1 Operation
3. 2 Basic
3. 3 Menu structure
3. 4 Auto show
3. 5 Static mode
3. 6 Master/Slave mode
3. 7 Linking
3. 8 DMX conguration
3. 9 DMX addressing
3. 10 Connection of the DMX line
3. 11 Construction of the DMX termination
3. 12 DMX control
3. 13 Fixture settings
3. 14 Fixture information
4 Maintenance
4. 1 Maintenance and cleaning the unit
4. 2 Fuse replacement
4. 3 Trouble shooting
2
2
3
3
5
6
7
7
8
9
9
9
9
9
9
11
11
12
13
13
14
14
14
STUDIOCOB TU-DY
2
SAFETY
General instruction
• The products referred to in this manual conform to the European Community Directives and are there-
fore marked with .
• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.
Never make any modications on the unit not described in this instruction manual, otherwise you will
risk an electric shock.
• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-
cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
• The connection to the main network of electric distribution must be carried out by a qualied electrical
installer. Check that the main frequency and voltage correspond to those for which the unit is designed
as given on the electrical data label.
• This unit is not for home use, only professional applications.
• Never use the xture under the following conditions:
- in places subject to vibrations or bu mps;
- in places with a temperature of over 45 °C.
• Make certain that no inammable liquids, water or metal objects enter the xture.
• Do not dismantle or modify the xture.
• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for
an inspection or contact the manufacturer directly.
• If the unit is to be put out of operation denitively, take it to a local recycling
plant for a disposal which is not harmful to the environment.
Warnings and installation precautions
• If this device will be operated in any way dierent to the one described in this manual, it may suer
damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short circuit, burns, electric shock, etc.
• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.
• Always additionally secure the projector with the safety rope.When carrying out any work, always com-
ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country
in which the xture’s being used.
• Install the xture in a well ventilated place.
• Keep any inammable material at a safe distance from the xture.
• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent
that their eectiveness is impaired.
• The lamp (LED) shall be changed if it has become damaged or thermally deformed.
• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may
trigger epileptic seizures in photosensitive persons or persons with epilepsy.
• Do not touch the product’s housing when operating because it may be very hot.
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about
the installation, usage and maintenance of the unit.
3
STUDIOCOB TU-DY
- 1 - INTRODUCTION
1.1 DESCRIPTION
STUDIOCOBTU is a powerful and incredibly versatile LED PAR. Fusing the old and the new, it pairs a 3100K
COB LED source with a traditional parabolic reector to deliver a proper PAR replacement with a homog-
enised output, single shadow and exible lens options.
STUDIOCOBDY is a powerful and incredibly versatile LED PAR. Fusing the old and the new, it pairs a 5000K
COB LED source with a traditional parabolic reector to deliver a proper PAR replacement with a homog-
enised output, single shadow and exible lens options.
1.2 TECHNICAL SPECIFICATIONS
LIGHT SOURCE TU
• Source: 100W High Power White LED
• CT: 3100K
• CRI: 94
• R9: 72
• Luminous Flux: 5221lm
• Lux: (30°) 1404lux @3m
• Source Life Expectancy: >30.000 h
• Other: TLCI (Qa):96.5
OPTICS
• Beam Angle: 60°
• Field Angle: 80°
• Lens Type: Dichroic parabolic reector in combi-
nation with HD fresnel lens
• Additional Optics: 30° (inc) - 15° (opt)
DYNAMIC EFFECTS
• Static Color Mode: Selection of static color
• Manual Color Mode: Manual adjustment of dim-
mer and strobe
• Auto Mode: Built-in programs with execution
speed adjustment
BODY
• Body: Sturdy die-cast aluminium body conceived
for long-time durability
• Body Color: Black, Mirror and White nishing
available
CONTROL
• Protocols: DMX512
• DMX Channels: 1/2/5ch
• Display: Black OLED high resolution display
• Firmware Upgrade: Yes, via USB-DMX interface
(UPBOX1) not included
• Master/Slave: for synchronized operation of
LIGHT SOURCE DY
• Source: 100W High Power White LED
• CT: 5000K
• CRI: 83
• R9: 82,6
• Luminous Flux: 5290lm
• Lux: (30°) 1940lux @3m
• Source Life Expectancy: >30.000 h
• Other: TLCI (Qa):68.7
OPTICS
• Beam Angle: 60°
• Field Angle: 80°
• Lens Type: Dichroic parabolic reector in combi-
nation with HD fresnel lens
• Additional Optics: 30° (inc) - 15° (opt)
DYNAMIC EFFECTS
• Static Color Mode: Selection of static color
• Manual Color Mode: Manual adjustment of dim-
mer and strobe
• Auto Mode: Built-in programs with execution
speed adjustment
BODY
• Body: Sturdy die-cast aluminium body conceived
for long-time durability
• Body Color: Black, Mirror and White nishing
available
CONTROL
• Protocols: DMX512
• DMX Channels: 1/2/5ch
• Display: Black OLED high resolution display
• Firmware Upgrade: Yes, via USB-DMX interface
(UPBOX1) not included
• Master/Slave: for synchronized operation of
STUDIOCOB TU-DY
4
Fig.1
Technical drawing
190
262 371
more units linked in a chain
ELECTRONICS
• Dimmer: Linear 0~100% electronic dimmer
• Dimmer Curves: 4 Dierent dimming curves
available
• Strobe/Shutter: 1-28 Hz, electronic
• Operating Temperature: -10° ~ +45°
• Flicker: Flicker free operation
• Selectable PWM: 600~25K Hz
ELECTRICAL
• Power Supply: 100-240V – 50/60Hz
• Power Consumption (at 230V): 104W
• Power Consumption (at 120V): 104W
• Output (at 230V): 12 units on a single power line
• Power factor: 0,9346
PHYSICAL
• Cooling: Forced air with low noise fan
• Suspension And Fixing: Double hanging bracket
suitable for safe hanging and for oor position-
ing
• Signal Connection: 3p+5p in/out
• Power Connection: PowerCON in/out
• IP: 20
• Dimensions (WxHxD): 262x190x371mm
• Weight: 4,5kg
more units linked in a chain
ELECTRONICS
• Dimmer: Linear 0~100% electronic dimmer
• Dimmer Curves: 4 Dierent dimming curves
available
• Strobe/Shutter: 1-28 Hz, electronic
• Operating Temperature: -10° ~ +45°
• Flicker: Flicker free operation
• Selectable PWM: 600~25K Hz
ELECTRICAL
• Power Supply: 100-240V – 50/60Hz
• Power Consumption (at 230V): 102W
• Power Consumption (at 120V): 102W
• Output (at 230V): 12 units on a single power line
• Power factor: 0,9331
PHYSICAL
• Cooling: Forced air with low noise fan
• Suspension And Fixing: Double hanging bracket
suitable for safe hanging and for oor position-
ing
• Signal Connection: 3p+5p in/out
• Power Connection: PowerCON in/out
• IP: 20
• Dimensions (WxHxD): 262x190x371mm
• Weight: 4,5kg
5
STUDIOCOB TU-DY
1.3 OPERATING ELEMENTS AND CONNECTIONS
1. LOCKING KNOB for the mounting bracket
2. MOUNTING BRACKET
3. DMX IN (3-pole XLR):
1 = ground, 2 = DMX -, 3 = DMX +
4. DMX OUT (3-pole XLR):
1= ground, 2 = DMX -, 3 = DMX +
5. CONTROL PANEL with display and 4 button
used to access the control panel functions
and manage them
6. DMX IN (5-pole XLR):
1 = ground, 2 = DMX-, 3 = DMX+, 4 N/C, 5 N/C
Rear panel Fig.2
7. DMX OUT (5-pole XLR):
1 = ground, 2 = DMX-, 3 = DMX+, 4 N/C, 5 N/C
8. POWER IN (PowerCON IN): for connection to a
socket (100-240V~/50-60Hz) via the supplied
mains cable
9. MAIN FUSE HOLDER: replace a burnt-out fuse
by one of the same type only (T2A 250V)
10. GND POINT grounding the xture to the earth
11. SAFETY RING to attach safety cable
12. POWER OUT: connect to supply power to the
next unit
1
43 567
2
9
8
10 11 12
STUDIOCOB TU-DY
6
- 2 - INSTALLATION
2.1 MOUNTING
STUDIOCOB may be set up on a solid and even surface. The unit can also be mounted upside down to a
cross arm. For xing, stable mounting clips are required.The mounting place must be of sucient stability
and be able to support a weight of 10 times of the unit’s weight.
When carrying out any installation, always comply scrupulously with all the regulations (particularly re-
garding safety) currently in force in the country in which the xture’s being used.
• Install the projector at a suitable location by means of the mounting bracket (2).
• Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-
ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.
• Adjust the projector and use the screw to slightly release or tighten the locking mechanism of the
bracket if is necessary (1).
Fig.3
1
2
7
STUDIOCOB TU-DY
- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
Connect the supplied main cable to a socket (100-240V~/50-60Hz). Then the unit is ready for operation
and can be operated via a DMX controller or it independently performs its show program in succession.
To switch o, disconnect the mains plug from the socket. For a more convenient operation it is recom-
mended to connect the unit to a socket which can be switched on and o via a light switch.
3.2 BASIC
Access control panel functions using the four panel buttons located directly underneath the black OLED
display (g.4).
Fig.4 - Functions of the buttons
MENU UP DOWN ENTER
Used to access the menu or
to return a previous menu
option
Navigates downwards through
the menu list and increases
the numeric value when in a
function
Navigates upwards through
the menu list and decreases
the numeric value when in
a function
Used to select and store the
current menu or conrm the
current function value or
option within a menu
MENU UP DOWN ENTER
STUDIOCOB TU-DY
8
3.3 MENU STRUCTURE
MENU
1Auto Show ðAuto 1 ðSpeed (0-100)
Auto 2 ðSpeed (0-100)
Auto 3 ðSpeed (0-100)
2Static ðDimmer ð0 - 255
Strobe ð0 - 255
3Dimmer Mode ðO
Dimmer 1
Dimmer 2
Dimmer 3
4Back Light ðOn
10 S
20 S
30 S
5Information ðFixture Hours ð9999
Version ðV1.0
6DMX Address ð1 - 512
7DMX Channel ð1 Ch
2 Ch
5 Ch
8Master/Slave ðMaster
Slave
9Fan mode ðauto/high
10 LED Frequency ð600 Hz
1200 Hz
2000 Hz
4000 Hz
25 kHz
11 Temperature ð40°C
Inhaltsverzeichnis
Sprachen:
Andere ProLights Projektor Handbücher
ProLights
ProLights STUDIOCOBPLUSTU Bedienungsanleitung
ProLights
ProLights LDOD251 Bedienungsanleitung
ProLights
ProLights ECLFR2KPTW Bedienungsanleitung
ProLights
ProLights PIXROLL6 Bedienungsanleitung
ProLights
ProLights ARCLED7513QZOOM Bedienungsanleitung
ProLights
ProLights ARCLED1318RGB Bedienungsanleitung
ProLights
ProLights ECLIPSEFRESNELJTW Bedienungsanleitung
ProLights
ProLights ARCLED338PIX Bedienungsanleitung
ProLights
ProLights MOBY40 Bedienungsanleitung
ProLights
ProLights MULTIRAY Bedienungsanleitung
ProLights
ProLights ARCHITAINMENT ARCLED7314TRI Bedienungsanleitung
ProLights
ProLights ARCLED9336RGB Bedienungsanleitung
ProLights
ProLights STUDIOCOBPLUSDY Bedienungsanleitung
ProLights
ProLights ARCLED4312WX Bedienungsanleitung
ProLights
ProLights Mosaico FX100 Series Bedienungsanleitung
ProLights
ProLights CABARET 305 Bedienungsanleitung
ProLights
ProLights EVO361PC Bedienungsanleitung
ProLights
ProLights Mosaico FX100GY FC Bedienungsanleitung
ProLights
ProLights ATMOSFERA903 Bedienungsanleitung
ProLights
ProLights ARCLED1107AW Bedienungsanleitung
Beliebte Projektor Handbücher anderer Marken
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung
NEC
NEC NP600S EDU Bedienungsanleitung
BenQ
BenQ SH753P Bedienungsanleitung
Eiki
Eiki EK-623U series Bedienungsanleitung
Epson
Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung
Epson
Epson PowerLite Home Cinema 705HD Bedienungsanleitung
