PROLiNK PPS2101 Bedienungsanleitung

ShareHub Device Server

Version 1.00

(English)

BEFORE GETTING STARTED

This QIG is designed to aid you to get started with the device. If you experience problems following these guides or

need further information pertaining to the device, please visit our website at www.prolink2u.com. All specifications

are subject to the manufacturer’s configuration at the time of shipping and may change without prior notice, written

or otherwise.

Table of Contents

Table of Contents..............................................................................................................................................................1

1. Introduction ..................................................................................................................................................................1

1.1. About 3 Models Described in this Manual........................................................................................................1

2. Product Overview.......................................................................................................................................................... 2

2.1. Package Contents..............................................................................................................................................2

2.2. Setup CD............................................................................................................................................................2

2.2.1. Start-up Procedures ..................................................................................................................................2

2.2.2. Physical Description ..................................................................................................................................2

2.2.3. Supported USB Devices.............................................................................................................................3

3. Basic Installation ........................................................................................................................................................... 4

3.1. Connecting the Hardware .................................................................................................................................4

3.2. Wireless connection ..........................................................................................................................................4

3.2.1. Preliminary................................................................................................................................................4

3.2.2. Set Wireless Configuration Using ShareHub Device Servers Control Center............................................ 4

3.3. Assigning an IP Address to the Server ...............................................................................................................7

3.3.1. Preliminary................................................................................................................................................7

3.3.2. IP Address..................................................................................................................................................7

3.3.3. Methods for Setting the IP Address ..........................................................................................................8

3.3.4. Server Names and Server Name Rules......................................................................................................8

3.3.5. Setting the IP Address Using DHCP ........................................................................................................... 8

3.3.6. Setting the IP Address Using the ShareHub Device Servers Control Center............................................. 8

4. Using the ShareHub Device Servers............................................................................................................................11

4.1. Introduction ....................................................................................................................................................11

4.2. Connect & Disconnect.....................................................................................................................................11

4.3. Subnet Issue ....................................................................................................................................................11

4.4. Installation of USB Device Driver ....................................................................................................................12

4.5. Using the ShareHub Device Servers................................................................................................................13

4.6. Auto-Connect Printer ......................................................................................................................................14

4.7. Network Scanner.............................................................................................................................................16

4.8. USB Storage..................................................................................................................................................... 18

4.9. Request to Connect.........................................................................................................................................19

4.10. Quitting the ShareHub Device Servers Control Center...............................................................................19

4.11. Limitations...................................................................................................................................................19

5. File Server....................................................................................................................................................................20

5.1. Preliminary......................................................................................................................................................20

5.2. Connecting USB Mass Storage to the Server ..................................................................................................20

5.3. Supported Codepages.....................................................................................................................................20

5.3.1. What is codepage?..................................................................................................................................20

5.3.2. Filename Encoding of FAT File System.................................................................................................... 20

5.3.3. When do you need to configure codepage?...........................................................................................20

5.3.4. Configuring the Server’s Codepages .......................................................................................................21

5.4. Using Shared Storages by SMB/CIFS Method for Windows ...........................................................................21

5.5. Using Shared Storage by FTP Methods for Windows .....................................................................................22

5.5.1. Use Microsoft IE to the shared USB Mass Storages................................................................................22

5.5.2. Use Microsoft Dos’s FTP client................................................................................................................22

6. The Servers’ Web Pages..............................................................................................................................................23

6.1. Introduction ....................................................................................................................................................23

6.2. Using the Server’s Web Pages.........................................................................................................................23

6.2.1. Displaying Server Status..........................................................................................................................23

6.2.2. Setting up Server Configuration..............................................................................................................24

7. Troubleshooting..........................................................................................................................................................26

7.1. LED Indicators .................................................................................................................................................26

7.2. Firewall............................................................................................................................................................26

8. Restore Factory Defaults.............................................................................................................................................27

8.1. Using the Server’s Web Pages.........................................................................................................................27

8.2. Using Init Button .............................................................................................................................................27

8.3. Default Parameters List...................................................................................................................................27

9.3.1. General Information................................................................................................................................27

9.3.2. TCP/IP......................................................................................................................................................27

9.3.3. User Accounts .........................................................................................................................................27

9. Upgrade Firmware ......................................................................................................................................................28

Procedure A: Using the ShareHub Device Servers Control Center .............................................................................28

Procedure B: Using the Init Button and the TFTP Client.............................................................................................28

10. The Init Button ..........................................................................................................................................................29

Appendix G. Technical Support.......................................................................................................................................30

EN 1

1. Introduction

Thank you for purchasing PROLiNK® ShareHub Device Servers (PPS2101/PPS2101N/PPS2104N). This Server is

designed to connect your Multifunction Printer, Scanner, Fax, Hard Drive, iPhone, iPod, USB Digital TV Tuner, Digital

Camera, USB Webcam, USB Speaker, USB CD, USB DVD to your network, allowing all network users’ access to these

shared USB devices.

1.1. About 3 Models Described in this Manual

This manual provides introductory information as well as detailed instructions on how to set up and manage

PROLiNK® ShareHub Device Servers (PPS2101/PPS2101N/PPS2104N) in various network environments. The

following table shows the differences among the 4 models. All 3 models have a 10/100 Mbit/sec LAN port.

However, PPS2101/PPS2101N has only one USB port, while PPS2104N have four USB ports. Compared with

PPS2101, both PPS2101N and PPS2104N have an additional wireless module (802.11b/g/n). Except for the

wireless configuration, most configuration and operations are the same for PPS2101 and PPS2101N/PPS2104N.

Similarly, almost all of the configuration and operations are the same for these models except that only one

USB device can be connected to PPS2101/PPS2101N while at most four USB devices can be connected to

PPS2104N. Unless explicitly specified, all instructions in the manual apply to PPS2101, PPS2101N, and

PPS2104N.

Model

LAN

Wireless

USB Port(s)

PROLiNK® PPS2101

Yes

PROLiNK® PPS2101N

Yes

PROLiNK® PPS2104N

Yes

To fully benefit from this document, you should be familiar with basic networking principles. The instructions

described in this manual are based on the settings in a new Server. To reload the Factory Parameters, you can

reset this Server back to Factory Default, which will restore most of the settings. For details, please refer to the

chapter “Restore Factory Defaults”.

EN 2

2. Product Overview

2.1. Package Contents

Verify that nothing is missing from the package by using the checking list below. Please contact your dealer if

anything is missing or damaged. All packing materials are recyclable. Please confirm the items in the package

below:

1. ShareHub Device Servers (either PPS2101, PPS2101N or PPS2104N)

2. Quick Installation Guide

3. Power Adaptor (either 12V/1A for PPS2101/PPS2101N, or 12V/1.5A for PPS2104N)

4. Setup CD (ShareHub Device Servers Control Center and User’s Manual and Quick Installation Guide)

2.2. Setup CD

This CD provides easy-to-use ShareHub Device Servers Control Center software, and the User’s Manual and

Quick Installation Guide.

2.2.1. Start-up Procedures

If your computer is configured to auto start CDs, this CD will start automatically when inserted. You

can also navigate to the CD and start the autorun.exe file from within the Windows file manager.

2.2.2. Physical Description

Power Adaptor Connector

For DC IN 12V/1A or DC IN 12V/1.5A power adaptor

Init Button

For restoring the parameters to the default values

Ethernet Connector

Connected to a twisted pair category 5 cable

Wireless Station 2,3

IEEE 802.11 b/g/n wireless station with antenna

USB Host Ports

USB 1.1/2.0 low, full, and Hi-Speed compliant

Indicators

Power Indicator

Lit while power is applied. If it is not lit, or if it

blinks, there is a problem with this Server or

power adapter.

Link Status 1

Lit while network is applied. If it is not lit, it

indicates that this server does not connect to

the network.

Status Indicator 1

Blinks to indicate network activity.

LAN Indicator 2,3

Blinks to indicate wired network activity. If it is

lit, it indicates the wired network is applied. If it

is not lit, it indicates that the server does not

connect to the wired network.

WLAN Indicator 2,3

Blinks to indicate wireless network activity. If it

is lit, it indicates the wireless network is applied.

If it is not lit, it indicates that the server does

not connect to the wireless network.

USB Indicator

Lit while a USB device connects to a USB Port

of this Server. If it is not lit, or if it blinks, there

is a problem with the USB device or this Server.

Notice

1 –PPS2101 only, 2 –PPS2101N only, 3 –PPS2104N only

EN 3

2.2.3. Supported USB Devices

The PROLiNK® ShareHub Device Servers supports the following types of USB devices.

USB Printer

USB multifunction printer (MFP/AIO)

USB scanner

USB storage (like USB external HD, flash disk, and digital camera)

USB speaker

USB camera

USB digital TV tuner

USB webcam

USB CD

USB DVD

iPod

iPhone

EN 4

3. Basic Installation

3.1. Connecting the Hardware

a) Make sure that your USB devices are switched off and that the Server’s Power Adapter is disconnected.

b) Connect the USB devices to the USB ports with the USB cables.

c) Connect the Server to the network with a twisted-pair category 5 cable, 10baseT or 100baseTX.

d) Turn on the USB devices and make sure it is ready for use.

e) Connect the Power Adapter to the Server. The power indicator will light up and USB1 and USB2 indicators

will flash in turn. (For PPS2101/PPS2101N, only USB1 indicator will flash.) When the Link indicator lights up,

the Server is correctly connected to the network. When USB1 and USB2 indicators stop flashing, the Server

starts to work normally.

3.2. Wireless connection

3.2.1. Preliminary

a) Before you can access wireless network, wireless parameters should be set correctly. You have to

setup the first wireless parameter set through LAN (wired) connection.

b) Wireless access can be set as infrastructure (station) mode, which need an access point to route

network messages with the same SSID.

c) Wireless access can be secured by WEP (64/128), WPA-PSA (TKIP/AES), and WPA2-PSK (AES).

d) In infrastructure mode, if network administrator wants to change any security related parameters,

PPS2101N/PPS2104N should be changed first, and then access point. If parameters mismatch

causes wireless access is not allowed, you have to modify those parameters through LAN

connection.

e) In infrastructure mode, the maximal transfer rate is 150 MBits depending on access point’s

capability.

3.2.2. Set Wireless Configuration Using ShareHub Device Servers Control Center

a) Install ShareHub Device Servers Control Center. It is available in the Setup CD.

b) Start ShareHub Device Servers Control Center and Auto-searching ShareHub Device Servers

window will appear.

Note:

If the wireless parameters are not correct or not set yet, you have to use LAN to access ShareHub

Device Servers Control Center.

EN 5

c) If the tool finds ShareHub Device Servers in your local area network, then you have to select a

server from the server list.

d) Double click the highlighted server (or click the “Configure Server” button) to get the server’s web

pages. Click CONFIG icon.

e) Login with administrator ID (default: admin) and its password (default: admin).

EN 6

f) Click Wireless icon.

g) In order to join an existing wireless network, you have to set the correct SSID, and the correct

security method with the correct key information.

h) If the wireless network is secured by WEP64 or WEP128, key index and WEP key must be set

correctly.

EN 7

i) If the wireless network is secured by WPA-PSK or WPA2-PSK, the key formats, shared key and

encryption must be set correctly.

j) Click Submit to save your settings. And the server will reboot.

k) You have now finished the procedure of setting the wireless parameters.

After properly configuring the wireless parameters, you can remove the network cable and reboot the

PPS2101N/PPS2104N. The PROLiNK® PPS2101N/PPS2104N will then connect to your wireless

network. PPS2101N/PPS2104N will detect if a network cable is plugged-in or not. If a network cable is

plugged-in, PPS2101N/PPS2104N will always connect to the network through the network cable.

Otherwise it will always connect to the network through wireless module. Once PPS2101N/PPS2104N

connects to the network, either by network cable or by wireless module, all operations to use

ShareHub Device Servers are exactly the same.

3.3. Assigning an IP Address to the Server

3.3.1. Preliminary

If you have a DHCP server on your network, your Server will receive an IP address automatically.

The IP address will then appear on the ShareHub Device Servers Control Center or on the page of

configuration report that you printed earlier. If your DHCP server does not give an IP address to

the Server, the Server will use the automatic private IP addressing IP: 169.254.0.0. ~

169.254.255.255

If you are not working in a DHCP network, you need to manually set the Server’s IP address.

3.3.2. IP Address

Unless you are assigning an IP address using DHCP, you must obtain an unused IP address from your

network administrator.

Andere Handbücher für PPS2101

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere PROLiNK Server Handbücher

PROLiNK

PROLiNK PPS2101 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung