ProMediaGear HM1 Bedienungsanleitung
Specications:
Height..........3 in. / 7.62 cm (body) ~ 5 in. / 12.70 cm (including clamp and knob)
Width....................................................................... 2.20 in. / 5.59 cm (body)
Depth..................................... 4.20 in. / 10.69 cm (including clamp and knob)
Weight.....................................................................................13.30 oz. / 378 g
Tilt Range.......................-55° to 90° Total Range of Tilt..............145°
16555 108th Ave. • Orland Park, IL 60467 USA
1.888.413.3332 • 708.263.4443
#HM1, Tilt Head
Instruction Manual
Mount the #HM1 onto your Monopod in 1 of 3 ways.
Screw your Monopod with a 3/8-16 screw into the bottom center of the #HM1
Monopod Tilt Head Base (G). Tighten until snug.
Screw your Monopod with a 1/4-20 screw into the bottom of either of the (2)
mounting positions available on the #HM1 Monopod Base (G). Tighten until snug.
Lock the #HM1 Tilt Head onto an Arca Compatible Clamp using the Arca
Compatible Mounting Base (F).
Holding your camera and lens securely, mount your Arca compatible lens collar
plate into the #C60 Clamp (A) and tighten. For cameras without a lens collar plate
we suggest the ProMediaGear #PXC2 8" Rail with Clamp, sold separately. This
will allow you to mount to an Arca Compatible Plate on your camera and create
a rail under your lens that will allow proper positioning on the #HM1 Tilt Head.
Never let go of your camera and lens until everything is secured and tightened.
Adjust the Friction Knobs (C) to t your shooting style. We suggest using the
larger ball knob for ne adjustments and the thumb knob to rmly lock down the
#HM1 Head.
Instructions
A. Arca Compatible #C60 Clamp with Spirit Level
1.
2.
3.
B. Clamp Lock Knob
C. Locking Knobs
G. 3/8-16 Threaded Mounting Adapter
F. Arca Compatible Base
E. Pivot Point
(2) 1/4-20 Threaded Mounting Adapters
#HM1, Tilt Head Mounting and Functionality
1/4-20 Threaded Mounting Adapter
3/8-16 Threaded Mounting Adapter
#A14 Anti-Rotation Holes (not included)
1/4-20 Threaded Mounting Adapter
#HM1, Bottom View
Safety Stop Screw
Optional Conguration
Do you wish to use the #HM1 Head with an Arca Compatible Plate on your camera
rather than your lens plate? The #C60 Top Clamp can be rotated 90° to allow just that
conguration. Hardware was included to remove the #C60, adjust the anti-rotation
pins, rotate the clamp and reinstall.
Using the supplied 5/32 Allen Key, remove the screw holding the #C60 to the #HM1.
Carefully remove and store the (2) non threaded dowel pins located in the clamp.
Next, using the small supplied 1/16 Allen Key insert the (2) small anti-rotation set
screws. The screws should stick above the #C60 Clamp approximately 1/4 inch.
Finally, rotate the #C60 clamp 90° and install back onto the #HM1. You may select
to have the clamp face forward or backwards to t your shooting style. Reinstall the
large center screw onto the clamp. Verify the connection is snug and the clamp is
ush to the #HM1 body before shooting.
1.
2.
3.
4.
Safety Stop Screw
ProMediaGear
708.263.4443 or Toll Free 1.888.413.3332
info@ProMediaGear.com • www.ProMediaGear.com
Check for loose screws and tighten with the included hardware. Oil
if necessary with WD40 or a silicone spray. The #HM1 is a precision
instrument that should be used only as directed.
ProMediaGear is not responsible for damage caused while using the #HM1 Tilt Head.
Visit www.ProMediaGear.com for more information and instructional videos.
Rev 02/19
#HM1 Maintenance
What's In The Box
#HB70
Handle for Bracket Plates
#BBGv2
Boomerang Flash Bracket
#C60
Arca Type Clamp
** L-Brackets **
Universal and Custom Available
#GKJr.
Katana Junior Gimbal
#PXC2
Arca Compatible Plate w/ Clamp
34-Series Pro-Stix
Carbon Fiber Tripods
** Custom Bracket Plates **
Various Brands / Models Available
#SS2P3
Quick Release Strap Adapter
Additional ProMediaGear Items
• (1) #HM1 Tilt Head with #C60 Arca Compatible Clamp
• (2) Safety Stop Screws
• Allen Key Set
• 5-Year Warranty
• Made in the USA
Inhaltsverzeichnis
Andere ProMediaGear Kamerazubehör Handbücher
ProMediaGear
ProMediaGear Katana GK Bedienungsanleitung
ProMediaGear
ProMediaGear TR34M Bedienungsanleitung
ProMediaGear
ProMediaGear SH1BK Bedienungsanleitung
ProMediaGear
ProMediaGear BH50 Bedienungsanleitung
ProMediaGear
ProMediaGear Paparazzi Bracket BP1 Bedienungsanleitung
ProMediaGear
ProMediaGear Modular L-Bracket Bedienungsanleitung
ProMediaGear
ProMediaGear Pro-Stix TR423 Bedienungsanleitung
ProMediaGear
ProMediaGear Rosette Adapter BLS1 Bedienungsanleitung
ProMediaGear
ProMediaGear Boomerang BBGv2 Bedienungsanleitung
ProMediaGear
ProMediaGear BP2 Bedienungsanleitung
