PROPHON B1HPA Bedienungsanleitung
B1HPA
High Power, active 15” subwoofer with 2100W built-in ampliers
(2 x 1050W @ 8 Ohm)
Instruction manual V1,01
2013-06-25
PROPHON B1HPA - Instruction manual, presets and applications
Self-powered, High Power frontloaded, tuned bassreex,
Single 15” subwoofer
The Prophoon B1HPA comes with two separate built-in class-D ampliers with PFC (Power Factor Correction)
and on-board DSP processing, for a variaty of setups, congurations and applications.
Each amplier delivers 1050W into 8 ohms (Total of 2100W into 8 ohms) there are four presets to chose from,
depending on application and setup,
(The B1HPA are not to be used with 4 or 2 ohm load on the Speakon output connector.)
PRESET 1) SUB/SUB
This preset is used for also powering an additional passive B1HP.
- The rst amplier powers the internal woofer, and have a subsonic lter @ 30Hz , 24dB/oct,
and a LowPass-lter@95Hz, 24dB/oct. for use as a frontloaded subwoofer in most applications.
- The second amplier powers the Speakon output with 1050W (8ohm)
for using an extra passive B1HP, the DSP settings are identical as the internal.
In this conguration, 1pc of B1HPA and 1 pc of B1HP stacked (See image)
makes a powerful stack of a 2100W, 2x15” subwoofer.
PRESET 2) SUB/TOP
This Preset enables the B1HPA to function as a subwoofer in an active sound system,
supplying any of the prophon series of passive fullrange speakers or multipurpose speakers.
- The internal ampliers have a subsonic lter @ 30Hz , 24dB/oct,
and a LowPass-lter@95Hz, 24dB/oct. for use as a frontloaded subwoofer in most applications.
- The second amplier powers the Speakon output with 1050W (8ohm)
With LowPass lter @ 95Hz, for using a passive fullrange speaker or multipurpose speaker.
- Seperate volume controls enables a balanced and versatile system control,
where sub and top can be adjusted depending on use and room responce.
PRESET 3) CARDIOID SETUP
This preset uses advanced mathemathical DSP processings to create a cardioid dispersion pattern,
using an additional external passive B18HP in a xed position.
- Place a passive B1HP as in illustration, behind the self-powered B1HPA
at a distance of 97 cm. front to front
- Connect a speakon cable from speakon output in the active B1HPA to speakon input
in the passive B1HP.
- Turn up the volume to full on both volume controls
- Ready to use your cardioid subwoofer system!
PRESET 4) CARDIOID SETUP WITH EXTERNAL PASSIVE TOP
This preset uses advanced mathemathical DSP processings to create a cardioid dispersion pattern,
using an additional external self-powered B1HPA in a xed position.
- Place another self-powered B1HPA using preset 2, as in illustration, in front of the self-powered B1HPA
that is using PRESET 4, at a distance of 97 cm. front to front.
- Connect the two subwoofers with power and signal cables, linking from one to the other
(it does not matter in what order they are connected)
- Connect two fullrange speakers or multi purpose speakers, one to each B1HPA from the
speakon output in the back of the B1HPA.
- You now have a powerful sound system whit two cardioid 15” woofers and two top speaker
on each side of the stage.
(you need to have at least four pcs. of the B1HPA, and four passive fullrange speakers for this setup)
97 cm.
97 cm.
Input power 230V AC, 50-60 Hz
(195-250V)
Neutrik Powercon blue connector
Max 16A load
Output power 230V AC, 50-60 Hz
Neutrik Powercon white connector
Max 16A load total, incl. input power
Balanced Neutrik XLR male input
(Gain: 10 kΩ Balanced to ground)
Balanced Neutrik XLR female
link out / through
Push button select
for chosing PRESETS 1-4
Neutrik Speakon output for connecting
external passive 8 ohm speaker.
(minimum impedance load 8 ohm! )
not to be used in 4 or 2 ohm load!
Volume potentiometer for
adjusting gain of the internal
subwoofer amplier
Volume potentiometer for
adjusting gain of the Speakon
output
Ventillation
Illustration and technical explanation of functions and features of the 2 x 1050W amplier module,
monted in the back of each B1HPA.
The module is mounted in a closed separate self ventillated cabinet, with heat-controled fans.
Preset select indicator 1-4
Prophon Audio & Teknik AB | Stockholm | Sweden
Linjalvägen 10C, 187 66 Täby | P.O. BOX 7268, 187 14 Täby
Tel: +46 8 92 86 00 | Mail: [email protected] | Web: www.prophon.com
Andere PROPHON Subwoofer Handbücher
