Protech BE-0996 Bedienungsanleitung

USER

MANUAL

BE-0996

3.5” SBC Intel®CoreTM i5-7300U /

i3-7100U / Pentium®4415U Series SoC

BE-0996 M1

BE-0996

3.5” SBC Intel® CoreTM i5-7300U /

i3-7100U / Pentium® 4415U Series SoC

All trademarks and registered trademarks mentioned herein are the

property of their respective owners.

This manual is copyrighted in Jan. 2019. You may not reproduce or

transmit in any form or by any means, electronic, or mechanical,

including photocopying and recording.

DISCLAIMER

This user’s manual is meant to assist users in installing and setting up

the system. The information contained in this document is subject to

change without any notice.

CE NOTICE

This is a class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take

adequate measures.

FCC NOTICE

This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

You are cautioned that any change or modifications to the equipment

not expressly approve by the party responsible for compliance could

void your authority to operate such equipment.

CAUTION: Danger of explosion may occur when the battery

is incorrectly replaced. Replace the battery

only with the

same or equivalent type recomm

ended by the manufacturer.

Dispose of used batteries according to the manufacturer’s

instructions.

WARNING: Some internal parts of the system may have high

electrical voltage. We strongly recommend that only qualified

engineers are allowed to service

and disassemble the

system. If any damages should occur on the system and are

caused by unauthorized servicing, it will not be covered by

the product warranty.

Contents

Revision History ............................................................................................. v

1 Introduction ......................................................................................... 1-1

1.1 About This Manual .................................................................... 1-2

2 Getting Started .................................................................................... 2-1

2.1 Packing List ............................................................................... 2-2

2.2 BE-0996 Specifications ............................................................. 2-3

2.3 Safety Precautions .................................................................... 2-5

3 Hardware Configuration ..................................................................... 3-1

3.1 JUMPER & CONNECTOR QUICK REFERENCE TABLE ........ 3-2

3.2 COMPONENT LOCATIONS ..................................................... 3-3

3.2.1 Top View of BE-0996RA-**N ............................................. 3-3

3.2.2 Jumper Setting of BE-0996RA-**N.................................... 3-4

3.2.3 Bottom View of BE-0996RA-**N ........................................ 3-5

3.2.4 I/O View of BE-0996RA-**N .............................................. 3-6

3.3 HOW TO SET JUMPERS ......................................................... 3-7

3.4 Setting Connectors and Jumpers .............................................. 3-9

3.4.1 COM2 Connector Pin9 Definition Selection Guide

(JP_COM2) ........................................................................ 3-9

3.4.2 COM Connector (COM1, COM2) .................................... 3-10

3.4.3 Dual USB 2.0 Port (USB2, USB3) ................................... 3-11

3.4.4 Internal USB 2.0 Connector (JUSB1) .............................. 3-12

3.4.5 Dual USB 3.0 Ports (USB1) ............................................ 3-13

3.4.6 LAN1, LAN2 Ports (LAN1, LAN2) .................................... 3-14

3.4.7 DP and HDMI Port (J1) .................................................... 3-15

3.4.8 HD Audio Connector (AUDIO1) ....................................... 3-16

3.4.9 ATX Power Input Connector (ATX1) ................................ 3-17

3.4.10 Speaker Connectors (SPK_L_OUT1, SPK_R_OUT1) .... 3-18

3.4.11 Digital Input / Output Connector (JDIO1) ........................ 3-19

3.4.12 Front Panel Connector (JFP1) ........................................ 3-20

3.4.13 CPU Fan Connector (CPU_FAN1) .................................. 3-21

3.4.14 SATA 3.0 Connector (SATA1) .......................................... 3-22

3.4.15 SATA Power Connector (JHDD_PWR1) ......................... 3-23

3.4.16 LVDS Connector (JLVDS1) ............................................. 3-24

3.4.17 Panel Inverter Connector (JINV1) ................................... 3-25

3.4.18 Mini PCI Express Slot (M_PCIE1) ................................... 3-26

3.4.19 mSATA Connector (M_SATA1) ........................................ 3-27

3.4.20 I2C Wafer (JI2C1) ............................................................ 3-28

3.4.21 SPI Connector (JP7)........................................................ 3-28

3.4.22 SPI Override Protection Selection (JP1) ......................... 3-29

3.4.23 Battery Wafer (JBAT1) ..................................................... 3-30

3.4.24 Slide Switch For LVDS Resolution Selection (SW1) ....... 3-31

3.4.25 LVDS VCC Selection (JP5) ............................................. 3-34

3.4.26 Backlight PWM Level Selection (JP6) ............................. 3-35

3.4.27 V3P3 MPCIE Selection (JP9) .......................................... 3-36

3.4.28 Clear CMOS Data Selection (JCMOS1) .......................... 3-37

4 Software Utilities ................................................................................. 4-1

4.1 Introduction ................................................................................ 4-2

4.2 Installing Intel® Chipset Software Installation Utility .................. 4-3

4.3 Installing Graphics Driver Utility ................................................ 4-4

4.4 Installing LAN Driver Utility ........................................................ 4-5

4.5 Installing Sound Driver Utility .................................................... 4-6

iii

4.6 Intel® Management Engine Components Installer Installation .. 4-7

4.7 Installing Intel® Serial I/O Driver Utility ...................................... 4-8

5 BIOS SETUP ........................................................................................ 5-1

5.1 Introduction ................................................................................ 5-2

5.2 Accessing Setup Utility .............................................................. 5-3

5.3 Main ........................................................................................... 5-6

5.4 Advanced .................................................................................. 5-8

5.4.1 Advanced – CPU Configuration ........................................ 5-9

5.4.2 Advanced – SATA Configuration ..................................... 5-11

5.4.3 Advanced – PCH-FW Configuration ................................ 5-12

5.4.4 Advanced – Trusted Computing ...................................... 5-13

5.4.5 Advanced – ACPI Settings .............................................. 5-15

5.4.6 Advanced – F81866 Super IO Configuration .................. 5-16

5.4.7 Advanced – Hardware Monitor ........................................ 5-19

Smart Fan Mode Configuration ................................................... 5-20

5.4.8 Advanced – F81866 Watchdog ....................................... 5-21

5.4.9 Advanced – S5 RTC Wake Settings ................................ 5-22

5.4.10 Advanced – Graphic Output Protocol Policy ................... 5-25

5.4.11 Advanced – USB Configuration ....................................... 5-26

5.4.12 Advanced – Network Stack Configuration ....................... 5-27

5.5 Chipset .................................................................................... 5-29

5.5.1 Chipset – System Agent (SA) Configuration ................... 5-30

Chipset – SA Configuration – Memory Configuration .................. 5-31

5.5.2 Chipset – PCH-IO Configuration ..................................... 5-33

Chipset – PCH-IO Configuration – PCI Express Configuration... 5-34

5.6 Security ................................................................................... 5-35

5.7 Boot ......................................................................................... 5-37

5.8 Save & Exit .............................................................................. 5-39

Appendix A Technical Summary ................................................A-1

BE-0996 Block Diagram ...........................................................................A-2

Interrupt Map ............................................................................................A-3

I/O Map ...................................................................................................A-14

Memory Map ...........................................................................................A-16

Configuring WatchDog Timer .................................................................A-18

Flash BIOS Update .................................................................................A-20

Revision History

The revision history of BE-0996 User Manual is described below:

Version No.

Revision History

Page No.

Date

Initial Release

2019/01

BE-0996 SERIES USER MANUAL

Page: 1-1

1Introduction

This chapter provides the introduction for BE-0996 as well

as the framework of the user manual.

The following topic is included:

•About This Manual

Chapter 1 Introduction

BE-0996 SERIES USER MANUAL

Page: 1-2

1.1 About This Manual

Thank you for purchasing our BE-0996 3.5 ”SBC Intel® CoreTM i5-7300U /

i3-7100U / Pentium® 4415U Series SoC. The BE-0996 provides faster processing

speed, greater expandability and can handle more tasks than before. This manual

contains 5 chapters and 1 appendix. Users can configure BE-0996 according to their

own needs. This user manual is intended for service personnel with strong hardware

background. It is not intended for general users.

The following section outlines the structure of this user manual.

Chapter 1 Introduction

This chapter provides the introduction for BE-0996 as well as the framework of the

user manual.

Chapter 2 Getting Started

This chapter describes the package contents and outlines BE-0996 specifications.

Read the safety reminders carefully on how to take care of BE-0996 motherboard

properly.

Chapter 3 Hardware Configuration

This chapter outlines the locations of BE-0996 motherboard components and their

respective functions. You will learn how to set the jumpers and configure BE-0996 to

meet your own needs.

Chapter 4 Software Utilities

This chapter contains helpful information for proper installations of the Intel Chipset

Software Installation Utility, Intel® Management Engine Components Installer,

USB 3.0 eXtensible Host Controller Utility, Graphics Driver Utility, LAN Driver

Utility, Sound Driver Utility and Hotfix Driver Utility.

Chapter 5 BIOS Setup

This chapter indicates you how to change the BIOS configurations.

Appendix A Technical Summary

This appendix provides the information about the allocation maps for BE-0996 block

diagram, BE-0996 motherboard resources, Watchdog Timer Configuration and Flash

BIOS Update.

Inhaltsverzeichnis

Andere protech Computerhardware Handbücher

protech

protech prox BC-K201 Bedienungsanleitung

protech

protech ProX-1580 Bedienungsanleitung

protech

protech BE-0986 Bedienungsanleitung

protech

protech SE-8300 Bedienungsanleitung

protech

protech PCI-531LF Bedienungsanleitung

protech

protech PC-550 Bedienungsanleitung

protech

protech Celeron EB-471LF M1 Bedienungsanleitung

protech

protech ProX-1640 Bedienungsanleitung

protech

protech SA-5082 Bedienungsanleitung

protech

protech prox BE-U236 Bedienungsanleitung

protech

protech ProX-1695 Bedienungsanleitung

protech

protech ProX-1710 Bedienungsanleitung

protech

protech Prox SE-8124 Bedienungsanleitung

protech

protech ProX-1680 Bedienungsanleitung

protech

protech BM-0982 Bedienungsanleitung

protech

protech Prox-1510 M1 Bedienungsanleitung

protech

protech PC-560-G5 Bedienungsanleitung

protech

protech ProX-1688 Bedienungsanleitung

protech

protech ProX-1550 Bedienungsanleitung

protech

protech Prox-1260 M4 Bedienungsanleitung

protech

protech PC-420 Bedienungsanleitung

protech

protech BE-0961 Bedienungsanleitung

protech

protech ProX-1635LF Bedienungsanleitung

protech

protech BM-0972 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung

protech BE-0996 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken