Protech KF-7130 Bedienungsanleitung

USER

MANUAL

KF-7130

Kiosk System Powered By

Intel®Bay Trail Platform

KF-7130 M1

KF-7130 17” Projected

Capacitive Touch Kiosk

With 18.5”Second Display

All trademarks and registered trademarks mentioned herein are the

property of their respective owners.

This manual is copyrighted in January 2016. You may not reproduce or

transmit in any form or by any means, electronic, or mechanical,

including photocopying and recording.

DISCLAIMER

This user’s manual is meant to assist users in installing and setting up

the system. The information contained in this document is subject to

change without any notice.

CE NOTICE

This is a class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take

adequate measures.

FCC NOTICE

This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

You are cautioned that any change or modifications to the equipment

not expressly approve by the party responsible for compliance could

void your authority to operate such equipment.

CAUTION: Danger of explosion may occur when the battery

is incorrectly replaced. Replace the battery only with the

same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s

instructions.

WARNING: Some internal parts of the system may have high

electrical voltage. We strongly recommend that only qualified

engineers are allowed to open and disassemble the system.

Please operate the LCD and Touchscreen with extra care as

they can be broken easily.

Page: i

Contents

1Introduction .........................................................................................1-1

1.1 About This Manual ....................................................................1-2

1.2 Kiosk System Diagrams............................................................1-2

1.2.1 Front View............................................................................1-2

1.2.2 Rear View.............................................................................1-3

1.2.3 Top View...............................................................................1-4

1.2.4 Quarter View ........................................................................1-4

1.2.5 Side View .............................................................................1-5

1.3 Quick Setup...............................................................................1-6

1.3.1 Power On KF-7130 and Connect to the Network ................1-6

1.3.2 Installing Paper Roll Axis......................................................1-7

1.4 System Specifications...............................................................1-8

1.5 OS Specification......................................................................1-13

1.6 API Specification .....................................................................1-14

1.7 Safety Precautions..................................................................1-14

2System Configuration.........................................................................2-1

2.1 LAN Port....................................................................................2-2

2.2 Power Button.............................................................................2-3

2.3 PPC Rear I/O Ports Diagram ....................................................2-4

2.4 DC-IN Port.................................................................................2-4

2.5 VGA Port ...................................................................................2-5

2.6 COM Port ..................................................................................2-5

Page: ii

2.7 Cash Drawer Port......................................................................2-5

2.8 USB Ports..................................................................................2-6

2.9 RAID Port..................................................................................2-6

2.10 RAID Power Port.......................................................................2-6

2.11 Printer Power Port.....................................................................2-6

2.12 2nd Display Power Port.............................................................2-7

2.13 Main Board Component Location & Jumper Settings...............2-8

2.14 Setting Jumpers ........................................................................2-9

2.15 Setting Main Board Connectors and Jumpers........................2-11

2.15.1 COM Port RI & Voltage Selection ......................................2-11

2.15.2 COM Connector .................................................................2-12

2.15.3 i-Button Connector .............................................................2-12

2.15.4 COM3 / i-Button Function Selection...................................2-12

2.15.5 Cash Drawer Control Selection..........................................2-13

2.15.6 Cash Drawer Power Selection...........................................2-13

2.15.7 USB Connector ..................................................................2-14

2.15.8 LED Connector...................................................................2-15

2.15.9 Power Connector ...............................................................2-15

2.15.10 Power for Thermal Printer Connector ................................2-16

2.15.11 External Speaker Connector..............................................2-16

2.15.12 Inverter Connector .............................................................2-16

2.15.13 LED Backlight Power Control Selection.............................2-16

2.15.14 Panel Resolution Selection................................................2-17

2.15.15 LVDS Connector ................................................................2-18

2.15.16 Touch Panel Connector......................................................2-18

2.15.17 Touch Panel Signal Interface Selection .............................2-19

2.15.18 Clear CMOS Data Selection ..............................................2-20

Page: iii

2.15.19 MSR/Card Reader Connector............................................2-20

2.15.20 UPS Connector ..................................................................2-21

2.15.21 Fan Connector ...................................................................2-21

2.15.22 RAID LED Connector (Optional)........................................2-21

2.15.23 SATA & SATA Power Connector.........................................2-22

2.15.24 SATA RAID Function Selection (Optional) .........................2-23

2.15.25 Power Button Connector....................................................2-23

2.15.26 Printer Connector...............................................................2-24

2.15.27 Mini-PCIe / mSATA Connector...........................................2-25

2.16 Sensor Board Component Locations......................................2-26

2.17 Setting Sensor Board Connectors and Jumpers.....................2-26

2.17.1 Power Supply Connector ...................................................2-26

2.17.2 COM Connector .................................................................2-27

2.17.3 External Speaker Connector..............................................2-27

2.17.4 Micro USB Connector ........................................................2-27

2.17.5 USB Connector ..................................................................2-28

2.17.6 Audio Connector ................................................................2-28

3Software Utilities.................................................................................3-1

3.1 Introduction................................................................................3-2

3.2 Installing Intel®Chipset Software Installation Utility..................3-3

3.2.1 Introduction ..........................................................................3-3

3.2.2 Intel®Chipset Software Installation Utility............................3-3

3.3 Installing VGA Driver Utility .......................................................3-4

3.4 Installing LAN Driver Utility........................................................3-5

3.5 Installing Sound Driver Utility ....................................................3-6

Page: iv

4BIOS SETUP ........................................................................................4-1

4.1 Introduction................................................................................4-2

4.2 Accessing Setup Utility..............................................................4-3

4.3 Main Menu.................................................................................4-6

4.4 Advanced Menu ........................................................................4-8

4.4.1 ACPI Settings.......................................................................4-9

4.4.2 Hardware Monitor...............................................................4-10

4.4.3 F81866 Watchdog..............................................................4-11

4.4.4 CPU Configuration .............................................................4-12

4.4.4.1 Socket 0 CPU Information ...........................................4-13

4.4.5 IDE Configuration...............................................................4-14

4.4.6 OS Selection ......................................................................4-16

4.4.7 Voltage/RI Adjustment Configuration .................................4-17

4.4.8 CSM Configuration.............................................................4-18

4.4.9 USB Configuration .............................................................4-20

4.4.10 Super IO Configuration ......................................................4-22

4.4.10.1 Serial Port 1 Configuration.........................................4-23

4.4.10.2 Serial Port 2 Configuration.........................................4-24

4.4.10.3 Serial Port 3 Configuration.........................................4-25

4.4.10.4 Serial Port 4 Configuration.........................................4-26

4.4.10.5 Parallel Port Configuration.........................................4-27

4.4.10.6 PS2 Controller Configuration.....................................4-29

4.5 Chipset Menu..........................................................................4-30

4.5.1 Configuring North Bridge....................................................4-31

4.5.1.1 GOP Configuration.......................................................4-32

4.5.2 South Bridge ......................................................................4-33

4.5.3 USB Configuration .............................................................4-34

4.5.4 PCI Express Configuration.................................................4-35

Page: v

4.6 Security Menu .........................................................................4-36

4.7 Boot Menu...............................................................................4-38

4.7.1 Configuring Hard Drive BBS Priorities ...............................4-39

4.8 Save & Exit Menu....................................................................4-40

Appendix A System Diagrams....................................................A-1

KF-7130 System Exploded Diagram........................................................A-2

Second Display Exploded Diagram..........................................................A-4

Second Display Installation Exploded Diagram........................................A-5

Bar Code Scanner Exploded Diagram .....................................................A-6

Card Reader Exploded Diagram ..............................................................A-7

Drawer Exploded Diagram (1)..................................................................A-8

Drawer Exploded Diagram (2)..................................................................A-9

HDD Exploded Diagram .........................................................................A-11

Full Page Passport Reader Exploded Diagram......................................A-12

Main Body –Internal Exploded Diagram (1) ...........................................A-13

Main Body –Internal Exploded Diagram (2) ...........................................A-15

Plastic Panel Exploded Diagram............................................................A-17

Power Supply Exploded Diagram...........................................................A-18

PPC Exploded Diagram..........................................................................A-19

Thermal Printer Exploded Diagram........................................................A-21

Appendix B Technical Summary................................................B-1

System Block Diagram .............................................................................B-2

Interrupt Map ............................................................................................B-3

I/O MAP..................................................................................................B-18

Memory Map...........................................................................................B-21

Configuring WatchDog Timer .................................................................B-23

Page: vi

Flash BIOS Update.................................................................................B-26

ACPI Functions List................................................................................B-30

List of Figures

Figure 1-1. Connect KF-7130 to the Network and Power................. 1-6

Figure 1-2. Installing Paper Roll Axis................................................ 1-7

Figure 2-1. PB-6822 Main Board Component Location.................... 2-8

Figure 2-2. Sensor Board Component Location............................. 2-26

Figure 4-1. Extensible Firmware Interface Diagram ......................... 4-2

Figure 4-2. POST Screen withAMI Logo.......................................... 4-4

Figure 4-3. Enter Password ............................................................. 4-4

Figure 4-4. BIOS Setup Menu Initialization Screen .......................... 4-5

Figure 4-5. BIOS Main Menu ........................................................... 4-7

Figure 4-6. BIOS Advanced Menu.................................................... 4-8

Figure 4-7. ACPI Settings Screen.................................................... 4-9

Figure 4-8. Hardware Monitor Screen............................................ 4-10

Figure 4-9. F81866 Watchdog Screen ............................................4-11

Figure 4-10. Advanced Menu > CPU Configuration Screen............ 4-12

Figure 4-11. Socket 0 CPU Information Screen.............................. 4-13

Figure 4-12. IDE Configuration Screen .......................................... 4-14

Figure 4-13. OS Selection Screen.................................................. 4-16

Figure 4-14. Voltage/RI Adjustment Screen.................................... 4-17

Figure 4-15. CSM Configuration Screen ........................................ 4-18

Figure 4-16. USB Configuration Screen......................................... 4-20

Figure 4-17. Super IO Configuration Screen.................................. 4-22

Figure 4-18. Serial Port 1 Configuration Screen............................. 4-23

Figure 4-19. Serial Port 2 Configuration Screen............................. 4-24

Figure 4-20. Serial Port 3 Configuration Screen............................. 4-25

Figure 4-21. Serial Port 4 Configuration Screen............................. 4-26

Page: vii

Figure 4-22. Parallel Port Configuration Screen............................. 4-27

Figure 4-23. PS2 Controller (KB & MS) Configuration Screen........ 4-29

Figure 4-24. Chipset Menu Screen................................................. 4-30

Figure 4-25. North Bridge Configuration Screen ............................ 4-31

Figure 4-26. Intel IGD Configuration Screen .................................. 4-32

Figure 4-27. South Bridge Screen.................................................. 4-33

Figure 4-28. Chipset Menu > USB Configuration Screen ............... 4-34

Figure 4-29. PCI Express Configuration Screen............................. 4-35

Figure 4-30. BIOS Password Configuration Screen ....................... 4-36

Figure 4-31. Boot Configuration Screen......................................... 4-38

Figure 4-32. Hard Drive BBS Priorities Screen............................... 4-39

Figure 4-33. Save & Exit Menu Screen.......................................... 4-40

Inhaltsverzeichnis

Andere protech Touch-Terminal Handbücher

protech

protech PA-3570 Series Bedienungsanleitung

protech

protech prox PA-J511 Bedienungsanleitung

protech

protech prox PA-A310 Bedienungsanleitung

protech

protech PA-J581 Series Bedienungsanleitung

protech

protech PA-6970 Series Bedienungsanleitung

protech

protech prox PA-A900 Bedienungsanleitung

protech

protech PA-3110 Bedienungsanleitung

protech

protech prox PA-6980 Bedienungsanleitung

protech

protech prox PA-J500 Bedienungsanleitung

protech

protech POS-3520 Bedienungsanleitung

protech

protech PA-J580 Series Bedienungsanleitung

protech

protech prox PA-A900 Bedienungsanleitung

protech

protech PA-3310 Bedienungsanleitung

protech

protech prox PA-J581 Bedienungsanleitung

protech

protech POS-6511 Series Bedienungsanleitung

protech

protech MH-5752 Bedienungsanleitung

protech

protech POS-3152 Series Bedienungsanleitung

protech

protech PA-3055 Bedienungsanleitung

protech

protech PA-6980 Series Bedienungsanleitung

protech

protech PA-6222 Bedienungsanleitung

protech

protech PA-6610 Bedienungsanleitung

protech

protech POS-6510 Series Bedienungsanleitung

protech

protech prox KS-M333 Bedienungsanleitung

protech

protech PS-8851A Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung

protech KF-7130 Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken