PROTECT IPCard™3
This refers to PROTECT IPCardTM hardware version 1.1 and software version 1.02.
The IPCard in combination with PROTECT IntelliSuiteTM adds the following func-
tionality to the Fog CannonTM:
• General networking capability
• Remoterealtimemonitoringoffaults,uidlevel,batterystateetc.
• Remote full report generation - including event log, settings, state of I/O
etc.
• Remote testing (test shot, relay test, acoustical annunciation)
• Remote reset
• Service Disable functionality (Blocking) by push-button or by remote control
• Thelevelofwhatisallowedwhenconnectingovernetworkcanbespecied
during installation by setting individual network permissions
• Pump test/priming by push-button
• “Panic” release functionality
• ATM protection mode on PROTECT 600iTM, PROTECT 1100iTM and PROTECT 2200iTM
The IPCardTM also adds the general possibility of delivering customer specic
application solutions with networking capability on request.
1.1. Basic networking skills
Please note that introduction to basic networking skills are beyond the scope of
this manual! The installer is assumed to have acquired the necessary skills before
attempting to install the IPCardTM.
In general PROTECTTM will not support basic networking problems since networking
issues can be very complex and depends on local IT-planning, IT-politics and the
way things are done in individual installations.
As a rule of thumb always consult the local network administrator before even
considering the installation of networking capable devices. Such installation usual-
ly requires planning, permissions and setting up of local routers and switches in
the network and you may not be allowed access to do this yourself.
1. Introduction to PROTECT IPCardTM
