- 7-
Translation of the
Original Operating Instructions
Micro wood tuning lathe, DB 250
Dear customer!
Using these instructions
• makes it easier to get familiar with the device
• prevents malfunctions caused by improper handling, and
• lengthens the service life of your device.
Please keep these instructions readily accessible at all times.
Use the device only when you have understood it exactly and
always adhere to the instructions.
PROXXON is not liable for the safe functioning of the device in
cases of:
• handling that does not conform to the usual usage,
• purposes of use not designated in the instructions,
• disregard of the safety instructions.
You are not entitled to guarantee claims in cases of:
• operator errors,
• inadequate maintenance.
WARNING!
Read all safety warnings and instructions. Failure to
follow all safety warnings and instructions listed below
may result in electric shock, fire and/or serious injury.
KEEP ALL SAFETY WARNINGS AND INSTRUCTIONS FOR
THE FUTURE !
For use in dry environments only
Protection class II device
Please do not dispose off the machine!
Risk of injury!
Never work without dust protection mask and
safety glasses. Some dusts have a hazardous
effect! Materials containing asbestos may not
be machined!
GB
Noise/vibration information
The information on vibration and noise emission has been de-
termined in compliance with the prescribed standardised and
normative measuring methods and can be used to compare
electrical devices and tools with each other.
These values also allow a preliminary evaluation of the loads
caused by vibration and noise emissions.
Warning!
Depending on the operating conditions while operating the de-
vice, the actually occurring emissions could differ from the val-
ues specified above!
Please bear in mind that the vibration and noise emission can
deviate from the values given in these instructions, depending
on the conditions of use of the tool. Poorly maintained tools, in-
appropriate working methods, different work pieces, too high a
feed or unsuitable work pieces or materials or unsuitable bits
and cutters (here: saw blade) can significantly increase the vi-
bration load and noise emission across the entire work period.
To more accurately estimate the actual vibration and noise load,
also take the times into consideration where the device is
switched off, or is running but is not actually in use. This can
clearly reduce the vibration and noise load across the entire
work period.
Warning:
• Ensure regular and proper maintenance of your tool
• Stop operation of the tool immediately if excessive vibration
occurs!
• Unsuitable bits and cutters can cause excessive vibration and
noises. Only use suitable bits and cutters!
• Take breaks if necessary when working with the device!
