2 3
Continuous Power: ......................................................................120W
Peak Power Surge:......................................................................240W
Input Voltage:..................................................................... 11 - 15VDC
Nominal Output Voltage:.......................................................... 115VAC
Output Frequency: .............................................................. 60H ± 2Hz
Output Wave Form: .............................................. Modified Sine Wave
Battery Drain Without AC Load:......................... <0.4A (at a 12V input)
Low Battery Shut-Down point: ...................................... 10.5 ± 0.3VDC
High Battery Shut-Down point: ..................................... 15.5 ± 0.5VDC
Fuse:............................................................ 12 Amp (Glass tube type)
Ambient Operating Temperature Range: .... 32°F to 104°F (0º to 40°C)
Efficiency: ......................................................................................85%
Dimensions: .................................3.13 x 5.4 x 3 in. (8 x 13.7 x 7.6 cm)
Weight: ....................................................................... 0.68 lbs.(0.3 kg)
Safety Certifications:.......................................................................ETL
Power Cord:............................................................3 ft. (90 cm), 16GA
TECHNICAL SPECIFICATIONS:
Technical specifications are subject to change without notice.
This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and troubleshooting
steps described within to ensure your safety and satisfaction. The contents of this instruction manual are based upon the latest
product information available at the time of publication. The manufacturer reserves the right to make product changes at any time
without notice.
SAFETY GUIDELINES / DEFINITIONS
WARNING: Read and understand this entire instruction manual before attempting to assemble, install, operate or maintain
this product. Failure to comply with the instructions may result in serious personal injury and/or property damage!
The following signal words are used to emphasize safety warnings that must be followed when using this product:
DANGER:
Indicates an imminently hazardous situation
that, if not avoided, WILL result in death or serious injury.
WARNING:
Indicates a potentially hazardous situation
that, if not avoided, COULD result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation
that, if not avoided, MAY result in minor or moderate injury.
NOTICE Indicates important information, which if not
followed, MAY cause damage to equipment.
Read these safety warnings and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
precautions may result in serious personal injury.
WARNING!
• Do not expose device to rain or other liquids, do not submerge.
• Keep out of reach of children and pets.
• Do not attempt to repair unit yourself.
• Do not place unit near strong magnetic fields.
• If storing unit in a vehicle, be sure it is properly secured so as not to move around
potentially causing damage or injury.
• Do not expose unit to high heat, radiation, or fire. Dispose of properly according to local,
state and/or federal e-waste disposal regulations. Do not dispose of in standard
municipal waste facilities.
• Donotattempttousethisunitasareplacementtoyourvehicle’sbattery.
• The warnings, cautions, and instructions in this manual cannot cover all possible
conditions or situations that could occur. Exercise common sense and caution when
using this inverter. Always be aware of the environment and ensure that the tool is used
in a safe and responsible manner.
• Do not allow persons to operate or assemble the product until they have read this
manual and have developed a thorough understanding of how it works.
• Do not modify this inverter in any way. Unauthorized modification may impair the
function and/or safety and could affect the life of the product. There are specific
applications for which the product was designed.
• Use the right tool for the job. DO NOT attempt to force small equipment to do the work
of larger industrial equipment. There are certain applications for which this equipment
was designed. This product will be safer and do a better job at the capacity for which it
was intended.
• DO NOT use this equipment for a purpose for which it was not intended.
• Industrial or commercial applications must follow OSHA requirements.
•
Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.
Cluttered, wet, or dark work areas can result in injury. Using the product in confined work
areas may put you dangerously close to other cutting tools and rotating parts.
• Do not use the inverter where there is a risk of causing a fire or an explosion; e.g., in the
presence of flammable liquids, gases, or dust. The product can create sparks, which
may ignite the flammable liquids, gases, or dust.
• Keep children and bystanders away from the work area while operating the inverter.
Do not allow children to handle it.
CAUTION!
• This inverter produces a Modified Sine Wave (MSW). MSW power is suitable for most
AC devices and power supplies used in electronic equipment, transformers, and motors.
• DO NOT use to power sensitive devices such as medical equipment or some computers
or audio equipment as it may perform poorly.
•
Do not force the inverter. Products are safer and do a better job when used in the manner
for which they are designed. Plan your work, and use the correct product for the job.
• Check for damaged parts before each use. Carefully check that the inverter will operate
properly and perform its intended function. Replace damaged or worn parts immediately.
Never operate the product with a damaged part.
• Disconnect the power supply from the product and be sure the unit is off position before
making any adjustments, changing accessories, or storing the tool. Such preventive
safety measures reduce the risk of starting the tool accidentally.
• Store the product when it is not in use. Store it in a dry, secure place out of the reach of
children. Inspect the tool for good working condition prior to storage and before re-use.
• Use only accessories that are recommended by the manufacturer for use with your
product. Accessories that may be suitable for one product may create a risk of injury
when used with another tool. Never use an accessory that has a lower operating speed
or operating pressure than the tool itself.
• Keep guards in place and in working order. Never operate the product without the
guards in place.
• Do not leave the tool running unattended.
• Do not discharge your car battery more than 10% of its total capacity, and deep cycle
batteries more than a 50% discharged state.
• Use only 12V batteries with this item.
• DO NOT expose the inverter to rain, snow, spray, or bilge water.
• Make sure the inverter wiring is of proper size and rating and in good condition.
WORK AREA SAFETY
INVERTER USE AND CARE
