Pulsar PSC12010 Bedienungsanleitung

PSC12010

PSC 12V/1A/55MM power supply

v.2.0

Edition: 12 from 22.05.2023

Supercedes edition: 11 from 20.11.2020

Features:

power output 1 A/12 V DC*

universal supply voltage range ~100 - 240 V

high efficiency 86%

standby power <0,1 W

efficiency class: VI

IP 67 enclosure

protections:

short-circuit protection SCP

surge protection (AC input)

overload protection OLP

warranty –2 years from production date

1. Technical description.

1.1.General description.

The PSU is intended for ~230 V mains supply to CCTV cameras that require stabilised voltage of 12 V DC.

The unit is protected against a short circuit and an overload and a surge.

1.2. Specifications.

Supply voltage

~100 - 240 V; 50/60 Hz

Current consumption

0,3 A

Supply power

12 W max.

Efficiency (average)

86%

Efficiency (10% load)

81%

Output voltage

12 V DC

Output current tAMB<30°C

1 A instantaneous current - refer to chart 1.

Output current tAMB=40°C

0,7 A - refer to chart 1.

Ripple voltage

100 mV p-p max.

Short-circuit protection SCP

electronic, automatic recovery

Overload protection OLP

105-150% of power supply, automatic recovery

IP protection class

IP67

Operating conditions

Temperature: 0oC - 40oC, relative humidity 20%...90%,

without condensation

Dimensions (LxWxH)

50 x 48 x 25 [mm]

Net/gross weight

0,09 / 0,125 [kg]

Protection class EN 62368-1

II (second)

Length of DC cable

0,5 m + plug DC5,5/2,1 female

Length of AC cable

0,3 m

Storage temperature

-20ºC...+60ºC

* In order to extend the life of the power supply, the load current of 0,7 A is recommended.

Chart 1.

Relation between output current and ambient

temperature (instantaneous load).

Fig.1. Mechanical view and dimensions of the PSU.

*Refer to chart 1

1.3. Accessories.

Available accessories for the power supplies are: fuse blocks and cable adapters. For details –visit www.pulsar.pl

2. Installation.

2.1. Requirements.

The power supply shall be mounted by a qualified installer, holding relevant permits and licenses (applicable and

required for a given country) with ~230 V mains supply. Unit should be mounted in confined spaces with normal relative

humidity (RH=90% maximum, without condensing) and temperature from 0°C to +40°C

The device should be installed in the metallic enclosure (cabinet, intended device). In order to meet the LVD and EMC

requirements, the rules concerning: supply, development and shielding ought to be followed - accordingly to the application.

2.2. Installation procedure.

1. Fit the power supply inside the box or other device.

2. Connect the DC cables to the load or to the terminal block.

3. Connect the power supply to the AC line.

4. After tests and operation control are performed, close installation box, case etc. and switch on the power.

3. Maintenance.

Any and all maintenance operations may be performed following the disconnection of the power supply from the power

network. The power supply does not require any specific maintenance procedures, however, in the case of significant level of

dust, it should be cleaned with compressed air.

WEEE LABEL

Waste electrical and electronic equipment must not be disposed of with normal household waste.

According to European Union WEEE Directive, waste electrical and electronic equipment should

be disposed of separately from normal household waste.

Pulsar sp. j.

Siedlec 150,

32-744 Łapczyca, Poland

Tel. (+48) 14-610-19-45

e-mail: [email protected]

http:// www.pulsar.pl

Andere Pulsar Stromversorgung Handbücher

Pulsar

Pulsar PS-2002470 Bedienungsanleitung

Pulsar

Pulsar PSB-12V7A Bedienungsanleitung

Pulsar

Pulsar PSA12030 Bedienungsanleitung

Pulsar

Pulsar EN54-2A17LCD Bedienungsanleitung

Pulsar

Pulsar GREEN POWER plus HADOC 3012C Bedienungsanleitung

Pulsar

Pulsar PSCL12030 Bedienungsanleitung

Pulsar

Pulsar PS401203 Bedienungsanleitung

Pulsar

Pulsar EN54C Series Bedienungsanleitung

Pulsar

Pulsar PS-602425 Bedienungsanleitung

Pulsar

Pulsar HPSBC 0412 Bedienungsanleitung

Pulsar

Pulsar PSCL12010 Bedienungsanleitung

Pulsar

Pulsar AWZ 300 Bedienungsanleitung

Pulsar

Pulsar PSU-B-13,8V/S-5A/1/EL-TR-17Ah/MC Bedienungsanleitung

Pulsar

Pulsar HPSB 1348B Bedienungsanleitung

Pulsar

Pulsar ADOC551230 Bedienungsanleitung

Pulsar

Pulsar PSBOC30024100 Bedienungsanleitung

Pulsar

Pulsar HPSG2H-12V5A-C Bedienungsanleitung

Pulsar

Pulsar MSRK 3512 Bedienungsanleitung

Pulsar

Pulsar PSBOC351225 Bedienungsanleitung

Pulsar

Pulsar BNC04124B Bedienungsanleitung

Pulsar

Pulsar AWZ 224 Bedienungsanleitung

Pulsar

Pulsar PSB351225 Bedienungsanleitung

Pulsar

Pulsar PSDC08128T Bedienungsanleitung

Pulsar

Pulsar AWZ 500 Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung

Elmdene

Elmdene G1380xN-y-s Series Bedienungsanleitung