Pulsar PSC12015 Bedienungsanleitung

PSC12015

PSC 12V/1,5A/66MM power supply

v.2.0

Edition: 10 from 11.09.2023

Supersedes edition: 9 from 26.03.2020

Features of the power supply:

power output 1,5 A/12 V DC *

universal supply voltage range ~100-240 V

high efficiency 87%

standby power <0,1 W

efficiency level: VI

IP67 case

protections:

SCP short-circuit protection

overvoltage protection (AC input)

overload (OLP)

warranty –2 year from the production date

1. Technical description.

1.1.General description.

Stabilized DC power supply is intended for supply CCTV cameras that require stabilised voltage of 12 V DC.

The unit is protected against short-circuit and overload.

1.2.Technical parameters.

Supply voltage

~100-240 V; 50/60 Hz

Current consumption

0,4 A

Supply power

18 W max.

Efficiency (average)

87%

Efficiency (10% load)

82%

Output voltage

12 V DC

Output current tAMB<30°C

1,5 A instantaneous current - refer to graph 1.

Output current tAMB=40°C

1 A - refer to graph 1.

Ripple voltage

100 mV p-p max.

Short-circuit protection SCP

electronic, automatic recovery

Overload protection OLP

105-150% of power supply, automatic recovery

IP protection class

IP67

Operation conditions

temperature 0oC ÷40oC

relative humidity 20%...90%

Dimensions (LxWxH)

58 x 58 x 28 [mm]

Net/gross weight

0,16 / 0,19 [kg]

Protection class EN 62368-1

II (second)

Lenght of DC cable

0,5 m + plug DC5,5/2,1 female

Lenght of AC cable

0,3 m

Storage temperature

-20ºC...+60ºC

* In order to extend the life of the power supply, the load current of 1 A is recommended.

Graph 1.

Relation between output current and ambient

temperature (instantaneous load).

Fig.1. Dimensions of power supply.

*Refer to graph 1

1.3. Accessories.

For the power supplies are available accessories - fuse blocks and cable adapter. For details –visit www.pulsar.pl.

2. Installation.

2.1. Requirements.

The power supply shall be mounted by a qualified installer, holding relevant permits and licenses (applicable and

required for a given country) with ~230 V mains supply. Unit should be mounted in confined spaces with normal relative

humidity (RH=90% maximum, without condensing) and temperature from 0°C to +40°C.

In order to fulfill LVD and EMC requirements the rules for power supplies, encasing and shielding shall be observed

according to application.

2.2. Installation procedure.

1. Fit the power supply inside the box or other device.

2. Connect the DC output to the load or to the terminal block.

3. Connect the power supply to the AC line.

4. After tests and operation control are performed, close installation box, case etc. and switch on the power.

3. Maintenance.

Any and all maintenance operations may be performed following the disconnection of the power supply from the power

network. The power supply does not require any specific maintenance procedures, however, in the case of significant level of

dust, it should be cleaned with the compressed air.

WEEE LABEL

Waste electrical and electronic equipment must not be disposed of with normal household waste.

According to European Union WEEE Directive, waste electrical and electronic equipment should

be disposed of separately from normal household waste.

Pulsar sp. j.

Siedlec 150,

32-744 Łapczyca, Poland

Tel. (+48) 14-610-19-45

e-mail: [email protected]

http:// www.pulsar.pl

Inhaltsverzeichnis

Andere Pulsar Stromversorgung Handbücher

Pulsar

Pulsar PSCU 04344SEP Bedienungsanleitung

Pulsar

Pulsar PS401203 Bedienungsanleitung

Pulsar

Pulsar POE0848C Bedienungsanleitung

Pulsar

Pulsar AWZ 300 Bedienungsanleitung

Pulsar

Pulsar PSCV3512 Bedienungsanleitung

Pulsar

Pulsar PSCV1012 Bedienungsanleitung

Pulsar

Pulsar PSG2 Series Bedienungsanleitung

Pulsar

Pulsar PS601250 Bedienungsanleitung

Pulsar

Pulsar BLACK POWER PSBEN 5012D/LCD Bedienungsanleitung

Pulsar

Pulsar BNC04124B Bedienungsanleitung

Pulsar

Pulsar PSBEN 5012C Bedienungsanleitung

Pulsar

Pulsar RUPS812T Bedienungsanleitung

Pulsar

Pulsar PSBEN 10A12E/LCD Bedienungsanleitung

Pulsar

Pulsar PSBEN 1012B Bedienungsanleitung

Pulsar

Pulsar PSP48005 Bedienungsanleitung

Pulsar

Pulsar GREEN POWER CCTV PSDCB09125C Bedienungsanleitung

Pulsar

Pulsar GREEN POWER CCTV BNC08128C Bedienungsanleitung

Pulsar

Pulsar Zenith 140 Bedienungsanleitung

Pulsar

Pulsar PSBEN 5012C/LCD Bedienungsanleitung

Pulsar

Pulsar HPSBOC 5524C Bedienungsanleitung

Pulsar

Pulsar PSACH 01244 Bedienungsanleitung

Pulsar

Pulsar PSBSH 2012B Bedienungsanleitung

Pulsar

Pulsar HPSB 20A12C Bedienungsanleitung

Pulsar

Pulsar PSCL12020 Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung

Elmdene

Elmdene G1380xN-y-s Series Bedienungsanleitung